Rack Solutions 108-6899 User manual

Adjustable 2-Post Shelf
108-6899 Kit P/N:
Installation Instructions

Unlock the Shelf: Loosen the #10-32 Screw attached to the shelf, but do not remove
it.
Step 1
#10-32 Screw
Kit Contents:
(1) Adjustable 2-Post Shelf
(1) #10-32 Phillips Head Screw
(2) Push-In Bumpers
(1) Velcro Strap
Rack Mount Hardware x4:
(4) #10-32 Phillips Head Screws
(4) #12-24 Phillips Head Screws
(4) #12-24 Square Nuts
(4) #12-24 Cage Nuts
Installation Instructions
Step 2 Adjust Shelf Position: Slide the shelf to an appropriate width for mounting the device.
Kit Contents
Page 2

#10-32 Screw
Push-In Bumper
Push-In Bumper
Step 3 Install Device and Lock Shelf in Position:
Place the device on the shelf and tighten
the #10-32 Screw to lock the shelf into place.
Step 4 Install Push-In Bumpers:
Slide the Push-In Bumpers to an appropriate location along
the rear slots to secure the back of the device.
Installation Instructions
Page 3

#12-24 Screws
#12-24 Cage Nuts
Step 5 Mount the Shelf:
Using the hardware pack, Rack Mount Hardware x4, install the #12-
24 Cage Nuts to the rack and then screw the shelf into the Cage Nuts with the #12-
24 Screws.
Step 6 Install Velcro:
If necessary, secure any device accessories in the side shelf with
velcro.
Installation Instructions
Warranty Statement
Innovation First, Inc. warrants our products against defects in material and workmanship for a
period of one (1) year from the date of purchase. Innovation First, Inc. liability shall be limited to
repairing or replacing, at our option, any defective product.
6899