radefy Bluetooth Smart Lock User manual

Digital lock
Bluetooth Smart Lock
Installation Manual

Table of Content
1. Product Introduction .............................................................................. 1
2. Safety Assistant Function ...................................................................... 1
3. Product Parameters ................................................................................ 2
4. Installation Instruction .......................................................................... .3
5. Attachment Bluetooth Lock Installation Schematic…………………………..7

- 1 -
1. Product Introduction
This Bluetooth smart lock is a new type of intelligent door lock
independently developed by our company. Currently, the RADEFY App can
be download and applied in 159 countries and regions. Advanced
electronic technology enables the Bluetooth Smart lock to have intelligent
recognition capabilities, making access management of your rental easier
and more convenient.
All our Bluetooth Smart lock models, are ideal for Hotels, Hostels, BnB
Rentals, Student dormitories, commercial office rentals and homes.
Please read this manual carefully before using our Bluetooth Smart Lock product.
2. Safety Assistant Function
1
Passage Mode
when you need to open/close the doors
frequently
2
Low Battery Alarm
when the voltage is lower than 4.8V, the alarm is
activated each time with the unlock, and the lock
could be unlocked 200 times after the first alarm
3
Scramble Code Function
It supports front and back dummy passwords to
prevent from peeking
4
Access Records Query
You can check access records at any time from your
Centurion Dashboard
5
USB Emergency Interface
You can charge the lock to unlock the door
when the battery runs out.

- 2 -
3. Product Parameters
Unlock Mode
Access Code: Unlimited
Bluetooth: Unlock by RADEFY Guest App
Emergency Power
USB external power supply
Power Supply
4 AA batteries
Work Temperature
-40~70℃
Button Type
Capacitive touch button
Door Thickness
35~55mm
G. Connect screws
H. Door
I. Square bar
J. Back panel
K. Screws
L. Battery cover
A. Door frame
B. Door box
C.Baffle
D.ST4.2*22 Screws
E. Mortise
F. Front panel

- 3 -
4. Installation Instruction
A. Drill hole according to the template. And please make sure the
following accessories are complete while opening box

- 4 -
B. Make sure the arrow point the latch. If not please rotate it after get
into power.
C. Remove the baffle, and install mortise on the door, then get the baffle
back.
D. Fix the cylinder on the mortise.

- 5 -
E. Fix the connection screws and square bar. Then connect the wires
before you install the front panel.
F. Remove the battery cover and connect the wires. Then insert the square
bar to the corresponding position. When the lock get into power, a
beeps and motor runs shows that works normally. Then install back
panel.

- 6 -
G. Test if the lock work’s normally, and tear off the protection film of the
lock panel.

- 7 -
5. Attachment：Bluetooth Lock Installation Schematic