Radio Shack Pro-92 User manual

Owner’s Manual Cat. No. 20-522
PRO-92 500-Channel
Portable Trunking Scanner
Please read before using this equipment.
20-522.fm Page 1 Friday, September 17, 1999 12:46 PM

2
FEATURES
Your RadioShack PRO-92 500-Channel Portable Trunk-
ing Scanner is one of a new generation of scanners de-
signed to track Motorola®Type I and Type II (such as
Smartnet®and Privacy Plus®) and hybrid analog trunking
systems, plus GE/Ericsson (EDACS®) and EF Johnson
(LTR®) type systems, which are extensively used in many
communication systems.
Trunking communications systems let a large group of 2-
way radio users (or even different groups of 2-way radio
users) efficiently use a set of frequencies. Instead of se-
lecting a specific frequency for a transmission, the user
simply selects a talk group. The trunking system automat-
ically transmits the call on the first available frequency,
and also sends a code that uniquely identifies that trans-
mission.
Since the trunking system might send a call and its re-
sponse on different frequencies, it is difficult to listen to
trunked communications using a regular scanner. The
PRO-92 monitors the data sent with a 2-way radio trans-
mission, so you can hear the call and response for that
user and more easily “follow” the conversation.
The scanner also lets you scan conventional transmis-
sions, and is preprogrammed with service search banks
for convenience. By pressing a single button, you can
quickly search those frequencies most commonly used
by public service and other agencies without tedious and
complicated programming.
This scanner gives you direct access to over 33,000 fre-
quencies including those used by police and fire depart-
ments, ambulance services, government agencies, air,
and amateur radio services.
© 1999 Tandy Corporation.
All Rights Reserved.
RadioShack and Adaptaplug are registered trademarks
used by Tandy Corporation.
Hypersearch and Hyperscan are trademarks
used by Tandy Corporation.
LTR is a registered trademark of EF Johnson.
Motorola, Smartnet and Privacy Plus
are registered trademarks of Motorola Inc.
EDACS is a registered trademark of GE/Ericsson Inc.
20-522.fm Page 2 Friday, September 17, 1999 12:46 PM

3
Your scanner includes these special features:
Simultaneous Trunking Operation — tracks three
trunking systems, LTR, Motorola, and EDACS at the
same time, as well as conventional systems.
Text Input — lets you input a text label for each channel,
talk group ID, bank, or other memory so you can easily
know about the transmission you are hearing.
Subaudible Tone Decode — decodes and displays the
Continuous Tone Coded Squelch System (CTCSS) tone
signal being transmitted.
Digital Subaudible Tone Decode — decodes and dis-
plays the Digital Coded Squelch (DCS) being received.
12-Character, 4-Line, Dot-Matrix Display — shows you
detailed operating information and lets you easily pro-
gram the scanner.
Data Cloning — lets you transfer the programmed data
to another PRO-92 scanner. You can also upload or
download the programmed data to or from a PC using an
optional interface kit.
10 Channel-Storage Banks — let you store 50 channels
in each bank to group channels so calls are easier to
identify.
Triple Conversion Superheterodyne Receiver — virtu-
ally eliminates any interference from intermediate fre-
quency (IF) images, so you hear only the frequency you
select.
HyperscanTM and HypersearchTM — the scanner scans
at up to 25 channels per second and searches at up to 50
steps per second, to help you quickly find interesting
transmissions.
20-522.fm Page 3 Friday, September 17, 1999 12:46 PM

4
60 Preprogrammed Frequency Ranges — let you
search for transmissions within preset frequency ranges
or within ranges you set, to reduce search time and select
interesting frequencies more quickly.
Scan Delay — delays scanning for about 2 seconds be-
fore moving to another channel in conventional mode, so
you can hear more replies that are made on the same
channel.
Priority Channel — you can set the scanner to check
one channel every 2 seconds so you do not miss impor-
tant calls.
Signal Attenuation (Attenuate) — lets you program
each memory to reduce the scanner’s sensitivity to strong
local signals, to reduce interference or noise caused by
these signals.
Weather Alert — automatically sounds the alarm tone to
advise of hazardous weather conditions when it detects
the alert signal on the local National Oceanic and Atmo-
spheric Administration (NOAA) weather channel.
Weather SAME Decode — displays the weather event
text so you can see the reason for the alert.
Lock out Function — lets you set your scanner to skip
over specified channels or frequencies when scanning or
searching, and skip over IDs when tracking trunked sys-
tems.
Key Lock — lets you lock the scanner’s keys to help pre-
vent accidentally changing the scanner’s programming.
Flexible Antenna with BNC Connector — provides ex-
cellent reception and is designed to help prevent antenna
breakage.
Memory Backup — keeps the frequencies stored in
memory for an extended time even without a battery.
20-522.fm Page 4 Friday, September 17, 1999 12:46 PM

5
Three Power Options — let you power the scanner with
internal batteries (non-rechargeable batteries or re-
chargeable batteries). You can also use an AC adapter
(not supplied) or power the scanner in a vehicle using a
DC adapter (not supplied).
Supplied Police Call Trunking Guide — provides a
quick reference to public safety trunking radio systems in
the United States.
Your PRO-92 scanner can receive these frequencies:
• 29–54 MHz
• 108–136.9875 MHz
• 137–174 MHz
• 380–512 MHz
• 806–823.9875 MHz
• 849–868.9875 MHz
• 894–960 MHz
This Owner’s Manual also includes the section “A Gener-
al Guide to Scanning” on Page 65 to help you target fre-
quency ranges in your service area so you can search for
a wide variety of transmissions.
FCC NOTICE
Your scanner might cause TV or radio interference even
when it is operating properly. To determine whether your
scanner is causing the interference, turn off your scanner.
If the interference goes away, your scanner is causing
the interference. Try the following methods to eliminate
the interference.
• Move your scanner away from the TV or radio.
• Connect your scanner to an outlet that is on a differ-
ent electrical circuit from the TV or radio.
• Contact your local RadioShack store for help.
20-522.fm Page 5 Friday, September 17, 1999 12:46 PM

6
If you cannot eliminate the interference, the FCC requires
that you stop using your scanner.
This device complies with Part 15 of the
FCC Rules
. Op-
eration is subject to the following conditions: (1) This de-
vice must not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Note: Mobile use of this scanner is unlawful or requires a
permit in some areas. Check the laws in your area.
SCANNING LEGALLY
Scanning is a fun and interesting hobby. You can hear
police and fire departments, ambulance services, govern-
ment agencies, private companies, amateur radio servic-
es, aircraft, and military operations. It is legal to listen to
almost every transmission your scanner can receive.
However, there are some electronic and wire communi-
cations that are illegal to intentionally intercept. These in-
clude:
• telephone conversations (cellular, cordless, or other
private means of telephone signal transmission)
• pager transmissions
• scrambled or encrypted transmissions
According to the
Federal Electronic Communications Pri-
vacy Act
(ECPA), as amended, you could be fined and
possibly imprisoned for intentionally listening to, using, or
disclosing the contents of such a transmission unless you
have the consent of a party to the communication (unless
such activity is otherwise illegal). These laws change
from time to time and there might be state or local laws
that also affect legal scanner usage.
20-522.fm Page 6 Friday, September 17, 1999 12:46 PM

7
CONTENTS
Preparation ................................................................ 10
Power Sources .................................................... 10
Using Batteries ............................................. 10
Charging Rechargeable Batteries ................ 13
Using AC Power ........................................... 14
Using Vehicle Power .................................... 15
Connecting the Antenna ...................................... 16
Connecting an Optional Antenna .................. 17
Connecting an Earphone/Headphones ................ 17
Listening Safely ............................................ 18
Traffic Safety ................................................ 18
Connecting an Extension Speaker ...................... 18
Using the Belt Clip ............................................... 19
Connecting the Clone Cable ................................ 19
About Your Scanner ................................................. 20
A Look at the Keypad .......................................... 20
A Look at the Display ........................................... 23
Understanding Banks .......................................... 25
Channel Storage Banks ................................ 25
Search Banks ............................................... 25
Understanding Your PRO-92’s Modes ................ 28
AM Mode ...................................................... 29
FM Mode ...................................................... 29
Coded Squelch Modes
(PL, DPL, and Trunking) ...................................... 29
PL Mode ....................................................... 29
DPL Mode ..................................................... 30
LTR (E. F. Johnson) Mode ........................... 31
Motorola Mode .............................................. 32
EDACS Mode ............................................... 33
Operation ................................................................... 35
Turning on the Scanner and Setting Squelch ...... 35
Storing Known Frequencies into Channels .......... 36
Storing Text Tags ................................................ 37
Assigning a Text Tag to a Channel .............. 37
Assigning a Text Tag to a Bank .................... 38
Text Input Chart ............................................ 39
Finding and Storing Active Frequencies .............. 40
Searching a Preprogrammed
Frequency Range ......................................... 41
20-522.fm Page 7 Friday, September 17, 1999 12:46 PM

8
Storing a Frequency While Searching for a
Specified Channel ........................................ 42
Changing a Search Range with
One of the 60 Preprogrammed Ranges ....... 43
Manually Changing a Search Range ........... 43
Scanning the Channels ....................................... 44
Turning Channel-Storage
Banks Off and On ......................................... 44
Manually Tuning a Frequency ............................. 45
Deleting Frequencies from Channels .................. 46
Listening To the Weather Band ........................... 46
Listening to a Weather Channel ................... 46
Weather Alert Feature .................................. 47
Special Features ....................................................... 48
Using the Delay Function .................................... 48
Locking Out Channels or Frequencies ................ 48
Locking Out Channels .................................. 48
Reviewing the Lock-Out Channels ............... 49
Locking Out Frequencies ............................. 49
Reviewing Locked-Out Frequencies ............ 50
Clearing a Locked-Out Frequency ............... 50
Clearing All Lock Out Frequencies
in a Search Bank .......................................... 50
Priority ................................................................. 51
Changing the Receive Mode ............................... 53
Changing the Frequency Step ............................. 54
Using the Attenuator ............................................ 54
Using the Display Backlight ................................. 55
Turning the Key Tone On and Off ....................... 55
Using the Keylock ................................................ 55
Changing the Display Contrast ............................ 56
Cloning the Programmed Data
from Scanner to Scanner .................................... 56
Trunking Operation .................................................. 57
Understanding Trunking ...................................... 57
Programming Trunking Frequencies ................... 58
Programming Fleet Maps .................................... 58
Talk Group ID’s ................................................... 60
Storing Talk Group ID’s ................................ 60
Talk Group ID Hold ...................................... 61
Locking Out Talk Groups ID ......................... 62
Reviewing Locked-Out Talk Group ID’s ....... 62
20-522.fm Page 8 Friday, September 17, 1999 12:46 PM

9
Clearing Talk Group ID’s .............................. 62
Clearing All Talk Group ID’s
in One Bank .................................................. 63
Open and Closed Modes ..................................... 63
Changing the Open/Closed Mode ................ 64
A General Guide to Scanning .................................. 65
Guide To Frequencies ......................................... 65
US Weather Frequencies ............................. 65
Ham Radio Frequencies ............................... 65
Birdie Frequencies ........................................ 65
Guide to the Action Bands ................................... 67
Typical Band Usage ..................................... 67
Primary Usage .............................................. 67
Band Allocation .................................................... 68
Frequency Conversion ......................................... 72
Troubleshooting ........................................................ 73
Resetting/Initializing the Scanner ........................ 75
Resetting the Scanner .................................. 75
Initializing the Scanner ................................. 75
Care and Maintenance .............................................. 77
Specifications ............................................................ 78
20-522.fm Page 9 Friday, September 17, 1999 12:46 PM

10
PREPARATION
POWER SOURCES
You can power your scanner from any of three sources:
• internal non-rechargeable batteries or rechargeable
batteries (not supplied — see “Using Batteries”)
• standard AC power (with an optional AC adapter —
see “Using AC Power” on Page 14)
• vehicle power (with an optional DC adapter — see
“Using Vehicle Power” on Page 15)
Notes:
• Connecting an AC or DC adapter to the scanner dis-
connects internal batteries when you use the sup-
plied non-rechargeable battery holder, but it does not
disconnect internal batteries when you use the sup-
plied rechargeable battery holder.
• If you install the rechargeable battery holder, you can
operate the scanner and recharge the rechargeable
batteries at the same time. See “Using Batteries”
below and “Charging Rechargeable Batteries” on
Page 13.
• If the scanner stops working properly after connect-
ing it to power, try resetting it. See “Resetting/Initial-
izing the Scanner” on Page 75.
Using Batteries
You can power the PRO-92 with six AA batteries. For the
longest operation and best performance, we recommend
alkaline batteries, available at your local RadioShack
store.
You can use either the supplied non-rechargeable black
battery holder, or the supplied rechargeable yellow bat-
tery holder. If you use the rechargeable battery holder,
we recommend RadioShack nickel-cadmium or nickel-
metal hydride batteries.
20-522.fm Page 10 Friday, September 17, 1999 12:46 PM

11
Warning: Never install non-rechargeable batteries in the
rechargeable yellow battery holder. Non-rechargeable
batteries can get hot or explode if you try to recharge
them.
Note: You must charge rechargeable batteries before
you use them the first time. See “Charging Rechargeable
Batteries” on Page 13.
Follow these steps to install the batteries.
1. Press down on the battery compartment cover on the
bottom of the scanner and slide the cover in the
direction of the arrow to remove it.
2. Pull out and slide the battery holder out of the battery
compartment.
20-522.fm Page 11 Friday, September 17, 1999 12:46 PM

12
3. Insert six AA batteries in the battery holder as indi-
cated by the polarity symbols (+ and –) marked on
the holder.
Cautions:
• Use only fresh batteries of the required size and
recommended type.
• Always remove old or weak batteries. Batteries
can leak chemicals that destroy electronic circuits.
• Do not mix old and new batteries, different types
of batteries (alkaline or rechargeable), or
rechargeable batteries of different capacities.
4. Slide the battery holder into the compartment.
Caution: The battery holder fits only one way. Do
not force it.
5. Replace the cover.
20-522.fm Page 12 Friday, September 17, 1999 12:46 PM

13
When battery power is low, Low Battery! appears
and the scanner beeps continuously. When battery pow-
er is depleted, the scanner turns itself off. Replace all six
non-rechargeable batteries, or recharge the rechargeable
batteries. See “Charging Rechargeable Batteries”.
Warning: Always dispose of old batteries promptly and
properly. Do not bury or burn them.
Caution: If you do not plan to use the scanner with bat-
teries for a month or longer, remove the batteries. Batter-
ies can leak chemicals that can destroy electronic parts.
Charging Rechargeable Batteries
Your scanner has a built-in charging circuit that lets you
charge rechargeable batteries (not supplied) while it is in
the scanner. To charge rechargeable batteries connect
an appropriate AC or DC adapter to the PWR DC 9V jack.
We recommend RadioShack rechargeable batteries.
Note: To charge batteries with a DC adapter from a DC
power source, you must use RadioShack Cat. No. 273-
1825 and a size H Adaptaplug®(neither supplied) avail-
able at your local RadioShack store. Make sure the
adapter’s voltage is set to 10V.
It takes between 14–16 hours to recharge rechargeable
batteries that are fully discharged. You can operate the
scanner while recharging the rechargeable batteries, but
charging takes longer.
Notes:
• The scanner can charge Ni-MH batteries, however,
these batteries require more than 24-hours to
charge. We recommend using an external quick
charger for Ni-MH batteries.
• Additional charging time is required for high-capacity
rechargeable batteries.
20-522.fm Page 13 Friday, September 17, 1999 12:46 PM

14
• Rechargeable batteries last longer and deliver more
power if you let them fully discharge once a month.
To do this, use the scanner until Low Battery!
appears on the display. Then fully charge the
rechargeable batteries.
Important: This scanner can use nickel-
cadmium rechargeable batteries. At the
end of a nickel-cadmium battery's useful
life, it must be recycled or disposed of
properly. Contact your local, county, or
state hazardous waste management au-
thorities for information on recycling or
disposal programs in your area or call 1-800-843-7422.
Some options that might be available are: municipal curb-
side collection, drop-off boxes at retailers such as your lo-
cal RadioShack store, recycling collection centers, and
mail-back programs.
Using AC Power
You can power the scanner using an 9V, 300 mA AC
adapter and a size H Adaptaplug (neither supplied). We
recommend RadioShack Cat. No. 273-1767 (available at
your local RadioShack store).
Cautions:
You must use a Class 2 power source that
supplies 9V DC and delivers at least 300
mA. Its center tip must be set to negative
and its plug must fit the scanner's PWR DC 9V jack.
Using an adapter that does not meet these specifica-
tions could damage the scanner or the adapter.
• Always connect the AC adapter to the scanner
before you connect it to AC power. When you finish,
disconnect the adapter from AC power before you
disconnect it from the scanner.
Follow these steps to connect the adapter.
1. Connect the Adaptaplug to the adapter’s cord with
the tip set to negative.
1
-
8
0
0
-
8
4
3
-
7
4
2
2
!
20-522.fm Page 14 Friday, September 17, 1999 12:46 PM

15
2. Plug the adapter’s barrel plug into the scanner’s
PWR DC 9V jack.
3. Plug the adapter into a standard AC outlet.
Using Vehicle Power
You can power the scanner from a vehicle’s 12V power
source (such as a cigarette-lighter socket) using a 9V,
300 mA DC adapter and a size H Adaptaplug (neither
supplied). We recommend RadioShack Cat. No. 273-
1810 (available at your local RadioShack store).
Note: For charging batteries with an optional DC adapter
from a DC power source, use RadioShack Cat. No. 273-
1825 and a size H Adaptaplug (available at your local Ra-
dioShack store). Make sure the adapter’s voltage is set to
10V.
Cautions:
You must use a power source that supplies
9V DC and delivers at least 300 mA. Its
center tip must be set to negative and its
plug must fit the scanner's PWR DC 9V jack. Using an
adapter that does not meet these specifications
could damage the scanner or the adapter.
• Always connect the DC adapter to the scanner
before you connect it to the power source. When you
finish, disconnect the adapter from the power source
before you disconnect it from the scanner.
Follow these steps to connect the adapter.
1. Connect the Adaptaplug to the adapter’s cord with
the tip set to negative.
2. Plug the adapter’s barrel plug into the scanner’s
PWR DC 9V jack.
!
20-522.fm Page 15 Friday, September 17, 1999 12:46 PM

16
3. Plug the adapter’s cigarette-lighter plug into your
vehicle’s cigarette-lighter socket.
Note: If the scanner does not operate properly when you
connect a DC adapter, unplug the DC adapter from the
cigarette-lighter socket and clean the socket to remove
ashes and other debris.
CONNECTING THE ANTENNA
Follow these steps to attach the supplied flexible antenna
to the ANT jack on the top of your scanner.
1. Align the slots around the antenna’s connector with
the tabs on the ANT jack.
2. Press the antenna down over the jack and turn the
antenna’s base clockwise until it locks into place.
20-522.fm Page 16 Friday, September 17, 1999 12:46 PM

17
Connecting an Optional Antenna
The antenna connector on your scanner makes it easy to
use the scanner with a variety of antennas, such as an
external mobile antenna or outdoor base station antenna.
Your local RadioShack store sells a variety of antennas.
Always use 50-ohm coaxial cable, such as RG-58 or RG-
8, to connect an outdoor antenna. For lengths over 50
feet, use RG-8 low-loss dielectric coaxial cable. If your
antenna’s cable does not have a BNC connector, you will
also need a BNC adapter (also available at your local Ra-
dioShack store).
Follow the installation instructions supplied with the an-
tenna, route the antenna cable to the scanner, then con-
nect it to the ANT jack.
Warning: Use extreme caution when installing or remov-
ing an outdoor antenna. If the antenna starts to fall, let it
go! It could contact overhead power lines. If the antenna
touches a power line, contact with the antenna, mast, ca-
ble or guy wires can cause electrocution and death! Call
the power company to remove the antenna. Do not at-
tempt to do so yourself.
CONNECTING AN EARPHONE/
HEADPHONES
For private listening, you can plug an earphone or mono/
stereo headphones (not supplied), available at your local
RadioShack store, into the jack on top of your scan-
ner. This automatically disconnects the internal speaker.
20-522.fm Page 17 Friday, September 17, 1999 12:46 PM

18
Listening Safely
To protect your hearing, follow these guidelines when you
use an earphone or headphones:
• Do not listen at extremely high volume levels.
Extended high-volume listening can lead to perma-
nent hearing loss.
• Set the volume to the lowest setting before you begin
listening. After you begin listening, adjust the volume
to a comfortable level.
• Once you set the volume, do not increase it. Over
time, your ears adapt to the volume level, so a vol-
ume level that does not cause discomfort might still
damage your hearing.
Traffic Safety
Do not wear an earphone or headphones while you drive
a vehicle or ride a bicycle. This can create a traffic hazard
and can be illegal in some areas.
Even though some earphones and headphones let you
hear some outside sounds when you listen at normal lev-
els, they still can present a traffic hazard.
CONNECTING AN EXTENSION
SPEAKER
In a noisy area, an amplified speaker (not supplied),
available at your local RadioShack store, might provide
more comfortable listening. Plug the speaker cable’s 1/8-
inch (3.5-mm) mini-plug into your scanner’s jack.
20-522.fm Page 18 Friday, September 17, 1999 12:46 PM

19
USING THE BELT CLIP
You can use the belt clip attached to the back of the
scanner for hands-free carrying when you are on the go.
Slide the belt clip over your belt or waistband.
CONNECTING THE CLONE CABLE
You can transfer the programmed data to and from an-
other PRO-92 using the supplied clone cable. Connect
the cable between each scanner’s PC/IF jacks. See
“Cloning the Programmed Data from Scanner to Scan-
ner” on Page 56. You can also upload or download the
programmed data to or from a PC using an optional PC
interface kit available by special order from your local Ra-
dioShack store.
20-522.fm Page 19 Friday, September 17, 1999 12:46 PM

20
ABOUT YOUR SCANNER
Once you understand a few simple terms used in this
manual and familiarize yourself with your scanner’s fea-
tures, you can put the scanner to work for you. You sim-
ply determine the type of communications you want to
receive, then set the scanner to scan them.
A
frequency
is the receiving signal location (expressed in
kHz or MHz). To find active frequencies, you can use the
search function.
You can also search the SEARCH banks, which are pre-
programmed frequencies in the scanner’s memory (see
“Searching a Preprogrammed Frequency Range” on
Page 41 for the frequency list). You can change the
SEARCH frequency ranges.
When you find a frequency, you can store it into a pro-
grammable memory location called a
channel
, which is
grouped with your other channels in a
channel-storage
bank
. You can then scan the channel-storage banks to
see if there is activity on the frequencies stored there.
Each time the scanner finds an active frequency, it stays
on that channel until the transmission ends. See “Trunk-
ing Operation” on Page 57 for terms related to trunking
systems.
A LOOK AT THE KEYPAD
Your scanner’s keys might seem confusing at first, but
this information should help you understand each key’s
function.
20-522.fm Page 20 Friday, September 17, 1999 12:46 PM