RainPoint Smart+ HCS021 User manual

USER MANUAL
Model No. HCS021FRF
Soil Moisture Sensor
Sma Garden Irrigation System
+
Web: www.rainpointonline.com
Email: se[e-mail]
WhatsApp: [phone]
US Free Hotline(English): [phone]
(MON-FRI 9�30 AM-5�30 PM PST)
EU Free Hotline(English Deutsch): [phone]
(MON-FRI 9�00 AM-5�00 PM CET )

1. INTRODUCTION
Batte Cover
Operation Button
1.2 Specication
• Waterproof Level: IPX5.
• Temperature Range: -4ºF-140ºF(-20ºC-60ºC).
• Humidity Range: 0%-100% RH
• Light Intensity: 0-200,000 lux
• Communicated by WI-FI 2.4GHz.
• Up to 60m depending on obstacle between hub and timer.
• Powered by 3* AA batteries (Not included).
1.3 Product Features
• Measures soil moisture (%) and suace temperature (℃/℉).
• Built in light sensor at the top to monitor light intensity.
• App remote controlled, easy to set up and operate.
• Pair with water timers, ecient and accurate irrigation.
• Appropriate and modern mold design, accurate measurement.
• Use for outdoor gardening, learn more about areas of soil information.
1.1 Product Oveiew
- 01 -

2. CONNECTION AND INSTALLATION
2.1 Sensor Connection
1. Select the button on the top right corner of the APP home page to add
device, or you can go to the hub’s home page and use “Sub-devices” to
add devices.
- 02 -
Tips:
Please scan the QR code or search the link to access
the video to connect the device quickly and easily.
Set Video:
https://www.youtube.com/watch?v=dWm60HTqo4M
This device is a sub-device, please connect the hub of Rainpoint Sma+
series before connecting this device.

2. Find “Soil Moisture Sensor” or the icon to add the sensor.󶀅
3. Inset the batteries, and then the indicator will quickly blink in red
Tips：Use the tool to unscrew the four screws of the back cover
- 03 -

4. Keep the sensor and the hub close to each other to connect automatically.󶀅
5. Besides that, you can also hold the button to reset and reconnect if you fail
to connect for the rst time.
6. After successfully connecting, the real-time suace temperature,soil
moisture, and light intensity will display on the device home page.

2.2 Sensor Installation
1. Inse the batteries and tighten the screw.
2. Dig an appropriate hole that can completely bu the soil probe.
- 04 -
20CM
Soil Soil
Ground

3. Bu the sensor in the soil and ensure that the sensor is veically downward.
Tip：For accuracy, make sure that the pa of the soil probe marked below
"BEST" is buried in the soil.
- 05 -
Soil Soil
Ground

1. Suace Temperature
2. Soil Moisture
3. Light Intensity
4. Setting: Basic settings for the sensor.
5. Chas: Check the past 24 hours, and 10 days' historical temperature，
moisture, and light intensity.
3.1 Device Home Page
3. APP FEATURES AND FUNCTIONS
1
2
3
4
5
- 06 -

- 07 -
3.2 Basic Setting
Find the icon on the top right corner of the APP home page to ＂Settings ＂
page. In the basic settings, you can check and manage the device information,
such as name, inteace and description.

3.3 Chas
Select Chas to review your soil moisture, suace temperature, and light
intensity in the past 24 hours, and 10 days in a line graph. Press the top right
corner to switch moisture, temperature, and light intensity.
If you need more detail information about the
operation, please scan the QR code or search
the link to access the video to check the
device quickly and easily.
Setup Video: http://bit.ly/3jlwZle

4. TROUBLESHOOTING
Problem Possible Factors Solution may help
Fail to connect
with the hub
Lose
connection or
get oine on
the APP
Data
inaccurate or
incorrect
1. Wi-Fi signal unstable.
2. Distance between
sensor and hub is
too far.
1. Low batte.
2. Hub disconnected.
3. Wi-Fi signal unstable.
Stones around the
sensor.
1. Wait a little bit and t to
connect one more time by
holding the button.
2. Stay close to the hub while
connecting.
1. Take the soil out of the soil
and change brand new
batteries.
2. Check the hub and
reconnect it if disconnected.
Then hold the button on the
sensor to reconnect.
3. Wait a little bit and t to
connect one more time by
holding the button.
Please make sure no stones
around the sensor while bu
it to avoid stones aect
accuracy.
- 08 -
If you need more help about the product or anything from us, please
contact us by
US: 1-833-381-5659 (EN)(MON-FRI󶀅9�30󶀅AM-5�30󶀅PM󶀅PST)
EU: [phone] (EN DE)(MON-FRI󶀅9�00󶀅AM-5�00󶀅PM󶀅CET)
Email:󶀅se[e-mail]