Rand McNally RV TABLET 80 User manual

QUICK START GUIDE

1
Connecting to Wi-Fi
When you first turn on your tablet, you’ll be asked to select a
Wi-Fi network to connect to the Internet. A Wi-Fi connection is
required to browse the web, download apps, and use Internet-
enabled features such as weather and traffic. Choose your
wireless access point or hotspot from the list and type in your
password.
Note: If you skip this step, you will not be able to use all the
features of your tablet. The RV GPS app, however, does not
require a Wi-Fi connection.
Registration
In the next step, you’ll be prompted to register your tablet with
Rand McNally. Your registration ensures that you have access
to the latest information and updates, as well as customer
support.
Getting Started

Your RV Tablet 80
2
Main Menu
Volume
Down Up Power Dash cam
Video out
Micro USB
SD card
Audio out
Micro USB
(power)
Video in

3
Install the Mount
NOTE: Follow all local regulations governing the placement of the mount.
1. Select an area with a line of sight to the sky and GPS satellites.
2. Clean and dry the mounting area.
3. Remove the suction cup protective film.
4. Attach the two pieces of the mount together.
5. Adjust the angle of the mount.
6. Pull the suction cup lever up to release suction.
7. Plug the power cord into the mount and
the vehicle’s 12-volt power source.
8. Place and hold the mount suction cup
against the mounting surface.
9. Press the suction cup lever down until it snaps into place.
10. Snap the tablet onto the mount.
11. Adjust the tablet so that it can be easily seen and does not
block the driver’s line of sight.

4
Android™User Interface
13
Swipe down at left
to view notifications
Swipe down at right
to view settings 2 4
5
6
87 9

5
Android™User Interface
1GPS is on
2Wi-Fi is on
3Indicates remaining battery power
4Current time
5View installed apps
6Tap or swipe right to view second home screen
7Back
8Return to last home screen
9View open apps
For more tips on your device,
visit randmcnally.com/support

6
Main Menu
1RV GPS Main Menu
2TripMaker®
Use the online planning tool to plan a trip with
multiple via points and transfer it to the navigation app
as a multi-stop trip.
3Road Atlas
4Dash Cam
5Backup Cam (requires accessory)
1 2
3 4 5
Rand McNally Market
Swipe right to the second home screen and tap the Rand McNally Market.
Register to access the latest apps and updates — Traffic Everywhere, Predictive Traffic, and more.

7
RV GPS >Main Menu
1
Enter RV information and access
RV-specific tools.
2Show location on the map and view
navigation instructions.
3Choose a destination.
4Select general, route, and map preferences.
5Mute/unmute the speaker.
6Adjust speaker volume.
7Battery status indicator.
Note: You can select different color schemes in Preferences > General > Skin Style. The following screen images
appear in the “Ice” style. Some screens may appear different, based on model number.
Note: From other screens, tap the Main Menu icon in the bottom right corner to return to the Main Menu.
1
4 5 6
7
23

8
RV GPS >RV Info and Warnings
1. Tap RV Tools > RV Info or Warnings.
2. Tap and to view options.
3. Tap the option button to be changed.
4. Enter new settings.
5. Tap to save changes.
RV GPS >Preferences
1. Tap Preferences.
2. Tap the General, Route or Map tab.
3. Tap and to view options.
4. Tap the option button to be changed.
5. Enter new settings.
6. Tap to save changes.
On the left,
tap on an
option
On the left,
tap on an
option
On the
right,
enter
settings
for the
option
On the
right,
enter
settings
for the
option

9
RV GPS >Destination
1Route to a new location.
2Return to a previously entered address.
3Access the Address Book.
4Plan a multi-stop trip.
5Route to a point of interest.
6Run an Internet search for a location by name or keyword.
(NOTE: This feature requires a Wi-Fi connection.)
7View trip content from Rand McNally.
8Tap the button on this screen and others for help.
1 2 3
4 5 7
8
6

10
RV GPS >New Location
1. Tap Choose Destination > New Location.
2. Tap Address.
3. Enter the name of the city. (NOTE: As you type, the
keyboard displays only the next possible letter.)
4. Prompts appear in the top bar. Tap the city to select. Or,
tap List to view cities beginning with the letter(s)
you entered.
5. Enter the street name. (NOTE: If the letters you need do
not appear, tap Expand Search.)
6. Enter the house number. (NOTE: To enter the house
number before the street, tap the house number
button in the previous step.)
See Confirm Destination Window.
Tips
• You can also route to a new location by City Center,
Intersection, or Latitude/Longitude, or choose
Address > Zip Code Search.
• View recent destinations by tapping Choose Destination > History. View recent cities by tapping Choose
Destination > New Location > Address > History.
• View saved locations by tapping Choose Destination > Address Book.

11
RV GPS >Confirm Destination Window
1Destination address.
2Begin route to destination.
3Compare a primary and alternate route and choose one.
4Add the location as a via point on the way to
a previously entered destination.*
5Save the location to the Address Book.
6Cross reference to printed Rand McNally
Road Atlas.
7View the map.
8Change the starting location for a route to the
location displayed here.
9Return to Main Menu.
10 Return to previous window.
*To manage via points, Tap Choose Destination > Multi-
Stop Trips. You can add up to 50 destinations in a multi-stop
trip, and optimize routing for trips of up to10 stops.
NOTE: This window may include
additional buttons based on the
type of destination selected.
1
3
5
6 7
9
8
10
2
4

12
RV GPS >Route Map Window
1Repeat spoken next-maneuver instructions.
2Name of street you will turn onto next.
3Show arrival time, remaining time, or other options.
4Slide out to show upcoming exit information.
5Directions list slideout. Tap Route Display Options
to select detail view, highway view, trip summary,
or summary map view.
6Zoom in/zoom out.
7Access Wi-Fi connected services.
8Return to Main Menu.
9Current direction. Tap to select a map display option (Heading Up, North Up, or 3D View). Also displays Wi-Fi status.
10 View current road name, upcoming cross road name, or city, county and state. Also displays advanced lane guidance
and weather (when activated). Tap to change.
11 View and save current location, detour, or cancel a route.
12 Tap on the current speed to display the Virtual Dashboard. (NOTE: Turns red for speed warnings; set in
RV Tools > Warnings.)
13
4
5
6
8
7
9
2
10
11
12 14
13
16
15

13
RV GPS >Route Map Window - continued
13 Current speed limit. Tap to open a “Tell Rand” about speed limits.
14 View the Traffic Window (enabled with Traffic Everywhere).
15 Mute the speaker.
16 Minimize icons to show simply the map and next maneuver.
RV GPS >Junction View
When on a route, Junction View displays when you have an upcoming
maneuver. Once past the maneuver, Junction View closes and the previous
window displays.
1Signs to follow for the next maneuver.
2Number and direction of lanes for the next maneuver.
3Distance to the upcoming maneuver. Distance decreases as you
approach the ramp.
4Lane assist arrow.
5Return to previous window.
1
32
4
5

14
RV GPS >Points of Interest (POIs)
Tap Choose Destination > Points of Interest.
1Find popular RV-friendly POIs near your current location.
Search for a POI:
2Near your RV
3In a particular city
4Along your route
5Near your destination
POI Categories
6Select a category.
7Find restaurants, hotels, and other subcategories.
8View custom POIs that have been uploaded. 7
8
6
1
3
45
2

15
RV GPS >Local Search
Tap Choose Destination > Local Search.
(Note: This feature requires a Wi-Fi connection.)
Search for a location by name or keyword near:
1Your RV
2A particular city
3Your destination
4Search for local restaurants.
5Access recent searches.
RV GPS >POIs - continued
9Tap location to select.
10 View and edit ratings and comments.
11 Tap to search by available services.
12 Apply or remove services filter for search results.
910
11 12
1 2 3
4 5

16
RV GPS >Virtual Dashboard
1Sunrise and sunset times based on vehicle location
(latitude/longitude) and day.
2Current speed.
3Elevation at current location.
4Percentage of current trip completed, distance to next
maneuver, and the number of miles and time spent on
the trip to this point.
5Match with the vehicle's odometer to automatically
update new fuel logs. Tap the pencil to edit.
6Gather trip information for up to three trips. Includes
odometer settings, hours, and speeds.
7Reset trip information for the selected trip (Tab 1, Tab 2, or Tab 3.)
8Select to automatically reset the information in each tab after the vehicle has remained stationary for the specified
number of hours.
9View fuel logs and add fuel purchase information.
10 Return to the Route Map Window.
1
4
3
5
10
78
9
6
2

17
RV GPS >Checklists, Maintenance, Trails, and Fuel
Tap RV Tools > Checklists, Maintenance, Trails, Fuel. Then
tap on each tab to view.
1Use Checklists to create and complete task lists to
prepare for a trip.
2Add notes in the Maintenance tab to record dates of
service for your RV.
3Use Trails to record a "bread-crumb" path of GPS
coordinates where your RV has traveled. Tap any record
to view the trail, edit the name, or set the color.
4Use the Fuel tab to view a list of fuel purchases. Tap Add Fuel to record the date, location and cost of fuel purchase.
Tap Save. Tap any record to make changes.
14
3
2

18
Note: These features require a Wi-Fi connection.
To view weather and fuel prices, tap the Wi-Fi connected services icon
( ) on the map screen. Tap each tab to view live information.
Tap Weather > Map Overlay to view precipitation, wind speed, and more
right on the map screen.
Tap Fuel Prices to view a list, then show prices on the map, sort, and filter.
RV GPS >Weather and Fuel Prices
RV GPS >T r a f fi c
To get traffic on your tablet, download Traffic Everywhere and Predictive
Traffic in the Rand McNally Market.
To view traffic information, tap the traffic icon ( ) on the map screen.
Tap Traffic Source. Select Predictive Traffic to view typical traffic
patterns by day/time. Select Traffic Everywhere to view real-time traffic
information.