1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Equipment Stand Self-Contained Refrigerated Base model 20000SC
model 20072SC shown
Specifications:
CABINET EXTERIOR: Cabinet body is constructed of all metal. The
top, front, and louver panel are stainless steel. Full length, 12
gauge steel subtop beneath one piece stainless steel top with
1/2" marine edged. Body ends are stainless steel. 6" stainless
steel legs with adjustable bullet feet are mounted to a heavy
gauge steel frame assembly which is integrally welded to bottom
of assembly. Unit totally prewired to junction box. 9' cordset for
115V operation.
CABINET INTERIOR: Interior of cabinet is fully coved to meet
N.S.F. standard #7. The interior is constructed of anodized
aluminum with coved corners for easy clean-up. Drawer opening
frames are A.B.S. and contain magnetic strip for positive seal of
drawer gaskets. Unit insulated with CFC free, foamed in place
polyurethane.
REFRIGERATED DRAWERS: Fully welded, unitized drawer
cartridge assembly - patented. Heavy duty full extension 14
gauge drawer tracks on 1 5/8" heavy duty stainless steel
bearings. Will accommodate (2) 12" x 20" x 4" deep pans per
drawer (pans not included). Quick release allows drawers to be
easily removed for cleaning. Stainless fronts, mounted to drawer
cartridge assembly with easy to grasp drawer handles. Drawers
with press fit magnetic gaskets - (designed for installation &
removal without tools).
REFRIGERATION: CFC free, R-134a refrigeration system to include
condensing unit, Randell blower coil, and thermostatic control for
operator adjustability. Blower coil fitted with expansion valve for
fast recovery. Compressor housing to allow maximum airflow and
includes standard condensate evaporator. Mullion coil, is coated
to resist corrosion, and offers maximum air flow.
Standard Features:
• R-134a self-contained refrigeration system features
expansion valve for fast recovery, and thermostatic
control for operator adjustability
• Hot gas condensate evaporator
• Drawer Cartridge Assemblies are fully removable with
Quick Release feature
• Foamed in place “CFC” free urethane insulation
• Marine edged stainless steel top with 12 gauge steel
subtop to hold the heaviest cooking equipment
• Removable 14 gauge drawer tracks on
1 5/8" heavy
duty stainless steel bearings
• Drawers to accommodate (2) 12"x 20"x 4"pans per drawer
(pans not included)
• 6" high adjustable legs
Description:
32 1/2" deep self-contained refrigerated cooking equipment
stand with reinforced stainless steel top. 12 gauge steel
subtop, and full marine edge. Expansion valve refrigeration
system with thermostatic control for operator adjustability.
R-134a refrigerant is “CFC free”. Unit on 6" high adjustable
legs.
These units feature our Patented Drawer Cartridge Assembly.
A fully welded, unitized drawer cartridge assembly with a
quick release that allows the refrigerated drawers to be
easily removed for cleaning. 3 year warranty on the entire
drawer system.
Options & Accessories:
Heavy duty casters
Flat top
Length modification of: _______
Compressor on left
Randell Equipment Stand, Page 1a
PP SPEC0051 Rev. A
Revised 04/07
33°F to 40°F 18°F to 22°F33°F to 41°F
model, 32” Drawer 20048SC-32 20072SC-32 20105SC-32
model, 27” Drawer 20048SC 20072SC 20078SC 20105SC
