Ranger SuperBEAT Speaker 310 User manual

www.ranger-technology.com
310
SuperBEAT Speaker
User’s Guide

Ranger SuperBeat 310 10W Bluetooth

Ranger SuperBeat speaker
Please charge the battery fully before your first time
use of the device. Red light shows under charging. Green light
shows charging full.

1. Put the Ranger SuperBeat speaker in pairing mode
2. Set your Bluetooth phone to “discover” the
Ranger SuperBeat speaker
Ranger SuperBeat speaker
will be discovered by your phone.
When the Ranger SuperBeat speaker is in pairing mode the LED
will flash in green.
Follow your phone’s instruction guide, first make sure that
Bluetooth is activated on your mobile phone. Then set your phone
to discover the “RANGER S310” This usually involves going to
“setup”,“connect” or “Bluetooth”menu on your phone and
selecting the option to“discover”or “add” a Bluetooth device.

3. Your phone will find the Ranger SuperBeat speaker
transfer
Ranger SuperBeat speaker
Your phone will find the Ranger SuperBeat speaker under name
“RANGER S310”.
Your phone then asks if you want to pair with the RANGER
S310.Accept by pressing “Yes” or “OK” on the phone and confirm
with the passkey or PIN=0000(4 zeros), if prompted for passkey.
Your phone will confirm when pairing is complete.