Raptor VISIONONE R00169 Operational manual

The Specialist Merchant
The VISIONONE headlamp is a powerful,
hands-free lighting solution. Featuring four light
modes which can easily be cycled through using
the on/off push button: 1 white LED (250 lumens),
2 C•O•B strips (80 lumens) or 2 red C•O•B strips
in steady or beacon mode. The light from the
250-lumen power LED has a spot beam distance
of 122 metres and its beacon mode is visible
more than 1 mile away. Its signature 2 strip
C•O•B design fully illuminates your immediate
area with its wide beam. The VISIONONE is a
tough, reliable, lightweight and completely
shock-proof headlamp perfect for working in
low light areas such as lofts, boiler cupboards
and plant rooms.
Product data sheet
Raptor VISIONONE
headlamp
Product code - R00169
Four light modes:
• Spotlight (250 lumens) - 3.5 hours / 122 metres
• C•O•B worklight (80 lumens) - 7 hours / 13 metres
• Red C•O•B (10 lumens) - 8 hours / 4 metres
• Red beacon - 48 hours / visible over 1 mile
Features:
• Tough, lightweight and shockproof
• Fully dimmable
• Programmable memory setting
• Direct to red light feature
• IP44 weather resistance allows
for all weather applications
• 1 metre impact resistance
Operation:
• Power/dimmer button
• 90° tilting headlamp
• Dual adjustable head straps
Batteries:
• 3 AAA batteries included
Specs:
• 75g, 100g with strap
• Length: 60mm
• Width: 40mm
• Diameter: 49mm
C•O•B (Chips on Board) A new innovation in LED
technology. C•O•B features smaller, easier clustered
LED chips that are mounted directly to the circuit board.
These LED chips work together as one lighting module.
Because of the compact design, C•O•B outperforms
traditional lighting by up to 50 times the light output
per centimetre of light surface.

Feature Description
Compact design Follows market trend for lightweight compact design, and multiple light sources
Environments Great for all DIY home and work task lighting, outdoors, cyclists and fitness runners
alike
Spot LED 250 lumen output on spotlight for distance viewing
White COB LED 80 lumen output with 150 degree even illumination of task workspace
Red COB LED 10 lumen output with 150 degree viewing and flashing mode
Standard AAA batteries 3 x AAA batteries are used
Size 60mm x 40mm x 49mm
Weather resistance IP44 weather resistance allows for all-weather applications
Impact resistance 1 metre
Warranty 2 years
Light Mode Lumens Beam Distance Run Time
White SPOT LED light High
Low
250
30
122m
39m
3.5 hours
20 hours
White dual COB light High
Low
80
8
13m
4m
7 hours
30 hours
Red dual COB LED light High
Low
10
2
4m
2m
8 hours
25 hours
RED beacon light Visible more than 1 mile away / 48 hours
Beam shape & features Dual COB LED projects a 150˚ cone of light
wolseley.co.uk
The information contained on this page was correct at date of issue. Fitting dimensions are provided as a guide only. Some variation may occur due to manufacturing tolerances.
We pursue a policy of continuing improvement in design and performance of products and so reserve the right to change specifications without prior notice.
Version number 1.0
Lighting instructions
Press button 1x to activate spotlight mode. Press 2x
to activate floodlight mode. Press 3x to activate red
floodlight mode. Press 4x to activate red beacon mode.
Press again to turn off.
Note: Leave any mode on for 5 seconds or longer and
the next press of the button turns light off.
Lighting sequence: Focused – Flood – Red – Red Beacon
Dimming instructions
Spotlight and floodlight both incorporate
dimming feature.
1. To begin dimming, press and hold the power
button for 3 seconds. The light will blink 1x
when the light reaches 10% or 100%.
2. Release the button at any time to obtain desired
brightness. (NOTE: If button is still pressed, light
will continue to dim and rise between 100% and 10%.)
3. To reset the light level, (spotlight or floodlight),
power off the spotlight and the headlamp will
reset the light mode back to 100% brightness
when you turn it back on.
WARNING
Do not stare directly at the light source.
The light source of this luminaire is not replaceable;
when the light source reaches its end of life the
whole luminaire should be replaced.
WEEE Directive 2012/19/EU
At the end of the product life dispose of the
packaging, product and battery in a corresponding
recycling centre. Do not dispose of the product
or battery with usual domestic refuse. Do not
incinerate the product or battery.