RASHA PROFESSIONAL Jinx Owner's manual

RASHA PROFESSIONAL A/S
Rasha Professional A/S 1800 Rustin Ave. Riverside CA, 92507 || 951-654-3585
rashaprofessional .com || [email protected]
1
QUICK USER MANUAL

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 || 951-654-3585
rashaprofessional .com || [email protected]
2
Edition Notes
The Jinx , User Manual Rev. 1 covers the description,
safety precautions, installation, programming, operation,
and maintenance of the Jinx. Rasha released this edition
of the Jinx User Manual in April 2022.
Trademarks
Rasha®is a registered trademark of RASHA
PROFESSIONAL A/S. (d/b/a RASHA®or Rasha). The
RASHA® logo in its entirety including the RASHA®name
and the Globe wiht Rings, and all other trademarks in this
manual pertaining to services, products, or marketing
statements are owned or licensed by RASHA®. Any other
product names, logos, brands, company names, and other
trademarks featured or referred to within this document
are the property of their respective trademark holders.
Copyright
Notice
RASHA owns the content of this User Manual
in its entirety, including but not limited to
pictures, logos, trademarks, and resources.
© Copyright 2015 RASHA. All rights reserved.
Electronically published by Rasha in the United States of
America.
Manual Use
Rasha authorizes its customers to download and print this
manual for professional information purposes only. Rasha
expressly prohibits the usage, copy, storage, distribution,
modication, or printing of this manual or its content for
any other purpose without written consent from Rasha.
Document
Printing
For better results, print this document in color, on letter
size paper (8.5 x 11 in), double-sided. If using A4 paper
(210 x 297 mm), congure your printer to scale the content
accordingly.
Intended
Audience
Any person in charge of installing, operating, and/or
maintaining this product should completely read through
the guide that shipped with the product, as well as this
manual, before installing, operating, or maintaining this
product.
Document
Revision
The Jinx User Manual Rev. 1 supersedes all previous
versions of this manual. Discard any older versions of
this manual and replace with this version. Go to www.
rashaprofessional.com for the latest version.
Author Date Editor Date
Deepak T. 27/06/2022

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 || 951-654-3585
rashaprofessional .com || [email protected]
3
1. Before You Begin................................. 4
What Is Included .................................. 4
Claims .................................................. 4
Manual Conventions ............................ 4
Symbols ............................................... 4
Safety Notes......................................... 5
Personal Safety.................................... 5
Mounting And Rigging .......................... 5
Power And Wiring................................. 5
Operation ............................................. 5
2. Introduction.......................................... 6
Description ........................................... 6
Features ............................................... 6
Overview .............................................. 6
Dimensions .......................................... 7
Gobos................................................... 8
3. Setup..................................................... 9
Power Supply ....................................... 9
AC Plug ................................................ 9
Fuse Replacement ............................... 9
Power Linking....................................... 9
DMX Linking......................................... 9
DMX Personalities................................ 9
Mounting ............................................ 10
Orientation.......................................... 10
Rigging ............................................... 10
Procedure.......................................... 10
4. Menu Map........................................... 11
Menu Map ..................................... 11-12
Control Panel Description .................. 13
DMX Channels .............................. 14-17
Returns.............................................. 18
Contact Us ........................................ 19
Table of Contents

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 || 951-654-3585
rashaprofessional .com || [email protected]
4
What Is
Included
• Rasha Jinx
• Edition to PowerCON®
• Omega Bracket with screw
• DMX Cable
• Quick reference guide
Claims
Carefully unpack the product immediately
and check the box to make sure all the parts
are in the package are in good condition.
If the box or the contents (the product and included
accessories) appear damaged from shipping or show signs
of mishandling, notify the carrier immediately, not Rasha.
Failure to report damage to the carrier immediately may
Void your claim. In addition, keep the box and contents
for inspection.
For other issues, such as missing components or parts,
damage not related to shipping, or concealed damage, le
a claim with Rasha within 7 days of delivery.
Manual
Conventions
Convention Meaning
1–512 DMX value range in number
50/60 A set of mutually exclusive values in the text
<SET> A button on the product’s control panel
Settings A product function or a menu option
0-512 A sequence of menu options
1-10 A range of menu values from which to choose in a menu
Yes/No A set of two mutually exclusive menu options in a menu
ON A unique value to be entered or selected in a menu
Symbols
Symbols Meaning
Display
Flashing
DMX Single lost or disconnected
The term “DMX” used throughout this manual refers to the DMX512 digital
data transmission protocol

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 || 951-654-3585
rashaprofessional .com || [email protected]
5
Safety Notes
Read all the following Safety Notes before working with this product. These
notes include important information about the installation, usage, and
maintenance of this product. This product contains no user-serviceable
parts. Any reference to servicing in this User Manual will only apply to
properly trained Rasha certied technicians. Do not open the housing or
attempt any repairs. All applicable local codes and regulations apply to
proper installation of this product.
Personal
Safety
Avoid direct eye exposure to the light source while the product is on. Always
disconnect this product from its power source before servicing. Always
connect this product to a grounded circuit to avoid the risk of electrocution.
Do not touch this product’s housing during operation because it may be
very hot.
Rigging
This product is for indoor use only! To prevent risk of re or shock, do
not expose this product to rain or moisture. (IP20) CAUTION: When
transferring product from extreme temperature environments, (e.g. cold
truck to warm humid ballroom) condensation may form on the internal
electronics of the product. To avoid causing a failure, allow product
to fully acclimate to the surrounding environment before connecting it
to power. Mount this product in a location with adequate ventilation,
at least 20 in (50 cm) from adjacent surfaces. Make sure there are
no ammable materials close to this product while it is operating.
Always carry
this product by the handles. Do not carry from the head. When hanging this
product, always secure to a fastening device using a safety cable.
Power And
Wiring
Always make sure you are connecting this product to the proper voltage
in accordance with the specications in this manual or on the product’s
specication label. Never connect this product to a dimmer pack or rheostat.
Never disconnect this product by pulling or tugging on the power cable.
Operation
Do not operate this product if you see damage to the housing, lenses,
or cables. Have the damaged parts replaced by an authorized
technician at once. To eliminate unnecessary wear and improve
its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it. Do not cover the
ventilation slots when operating to avoid internal overheating. Do not
aim this product toward the Sun. The lenses could concentrate the
solar energy and cause internal overheating. The maximum ambient
temperature is 113 °F (45 °C). Do not operate this product at a
higher temperature. In case of a serious operating problem, stop using this
product immediately!
The term “DMX” used throughout this manual refers to the DMX512 digital data
transmission protocol

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 || 951-654-3585
rashaprofessional .com || [email protected]
6
Features • Compact design, low weight, less electricity consumption and light
engine’s long life over 50000 hours.
• Dual Gobo wheels with 15 gobo patterns, color wheel with 9 colors, and
newly designed smooth frost wheel for color wash.
• 1 : 13.3 motorized zoom ratio, in range of 3 to 40 Degree.
• Sharp Laser-Like Beam, Gobos, wash, and prism e󰀨ect.
• Incredible luminous output.
• Ultra smooth & fast movements.
Description
Jinx is a newly designed compact trio LED moving head xtures, features
color beams(mid air e󰀨ects), individually controllable rotating gobos(User
replaceable), Fixed gobo and smooth color wash. Jinx is the perfect 3 in 1
(Trio) moving head xture for small to big event production, venues, arenas
& TV studio.
Jinx features Incredible luminous output with the monochromatic source
procession calibrated at 6500 degree kelvin, It’s light output & per watt
lumen ratio is amazing(comparable to 7R beam), not only that 1 : 13.3
motorized zoom ratio, in range of 3 to 40 Degree feature provide lighting
designer additional exibility to create awe-inspiring lighting shows.
Additionally, compact design, low weight, less electricity consumption and
light engine’s long life over 50000 hours makes this xture even better.
INTRODUCTION
Product Overview

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 || 951-654-3585
rashaprofessional .com || [email protected]
7
DIMENSIONS

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 || 951-654-3585
rashaprofessional .com || [email protected]
8
GOBOS

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 || 951-654-3585
rashaprofessional .com || [email protected]
9
SETUP
Power Supply
Each Jinx has an auto-ranging power supply that works with an input
voltage range of 100 to 240 VAC, 50/60 Hz. To determine the power
requirements for each Jinx refer to the label a󰀩xed to the product.
Y o u c a n a l s o r e f e r t o t h e T e c h n i c a l S p e c i  c a t i o n s c h a r t i n t h i s m a n u a l
The listed current rating indicates the maximum current draw during
normal operation. For more information, you may download Sizing Circuit
Breakers from the Rasha website: www.rashaprofessional.com
Always connect this product to a protected circuit with an appropriate
electrical ground to avoid the risk of electrocution or re. To eliminate
unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect this product to a rheostat (variable resistor) or dimmer circuit,
even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The Jinx comes with a power input cord terminated with a Neutrik®
powerCON®A connector on one end and an Edison plug on the other end
(U.S. market). If the power input cord that came with your product has no
plug, or if you need to change the Edison plug, use the table below to wire
the new plug.
Fuse
Replacement
1. Disconnect this product from the power outlet.
2. Using a at-head screwdriver, unscrew the fuse holder cap from the
housing.
3. Remove the blown fuse and replace with a another fuse of the same
type and rating (F 10 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
Make sure to disconnect the product’s power cord before replacing a
blown fuse. Always replace the blown fuse with another of the same type
and rating
Power Linking
On 20 AMP circuit, you can link upto 7 Fixtures @ 120V and 14 xtures
@ 230V.
DMX
Personalities
• The Jinx uses a 3 pin DMX data connection for the 16/22 channel DMX
personalities.
• Refer to the Introduction chapter for a brief description of each DMX
personality.
• Refer to the Operation chapter to learn how to congure the Jinx to work
in these personalities.
• The DMX Values section provides you with detailed information regarding
the DMX personalities
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 || 951-654-3585
rashaprofessional .com || [email protected]
10
Before mounting this product, read and follow the Safety Notes. For our
Rasha®Professional line of mounting clamps, go to
https://www.rashaprofessional.com/clamps
Orientation Always mount this product in a safe position and make sure there is
adequate room for ventilation, conguration, and maintenance.
Rigging
Rasha recommends using the following general guidelines when
mounting this product.
• When selecting an installation location, consider easy access to
this product for operation, programming adjustments, and routine
maintenance.
• Make sure to mount this product away from any ammable material as
indicated in the Safety Notes.
• Never mount in places where rain, high humidity, extreme temperature
changes, or restricted ventilation may a󰀨ect the product.
• If hanging this product, make sure that the mounting location can
support the product’s weight. See the Technical Specications for the
weight-bearing requirements of this product.
• When hanging this product, always secure to a fastening device using
a safety cable.
Procedures
The Jinx comes with a preinstalled mounting surface to which you will be able
to attach the included omega bracket. Make sure the clamps are capable
of supporting the weight of this product. Use at least 1 mounting point per
product. In addition, use a safety cable to link the product to the structure.
MOUNTING
Display:
Button:
To show Menu options and the selected functions
SETTING
DOWN
UP
ENTER To conrm the selected functions
To go forward in the selected functions
To go backward in the selected functions
To select the programming functions
Dimmer Curve
• Select Dimmer Curve.
• Press ENTER button to conrm (present mode will blink on the display)
• Use UP or DOWN button to select: Linear, Square Law, Inverse Squ or S-Curve
• Once selected, press ENTER button to store
• Press MENU button to access the previous menu

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 || 951-654-3585
rashaprofessional .com || [email protected]
11
MENU MAP
Menu Programming Level Description
DMX Addr 001-497 Sets DMX address on
xture
Channel
Mode
16/22 Select and set channel
mode
Reset Motor Power:
On/O󰀨
Enter Sets Motor reset
Pan/Tilt Enter Sets Pan / Tilt reset
Color Enter Sets Color wheel reset
Gobo Enter Sets Gobo wheels resets
Beam path Enter Sets Zoom reset
Run DMX/ User /
Auto
Enter Sets Control Protocol
Manual Chn01:000 Sets Channel 1 manually
Chn02:000 Sets Channel 2 manually
Chn03:000 Sets Channel 3 manually
Chn04:000 Sets Channel 4 manually
Chn05:000 Sets Channel 5 manually
Chn06:000 Sets Channel 6 manually
Chn07:000 Sets Channel 7 manually
Chn08:000 Sets Channel 8 manually
Chn09:000 Sets Channel 9 manually
Chn10:000 Sets Channel 10 manually
Chn11:000 Sets Channel 11 manually
Chn12:000 Sets Channel 12 manually
Chn13:000 Sets Channel 13 manually
Chn14:000 Sets Channel 14 manually
Chn15:000 Sets Channel 15 manually
Chn16:000 Sets Channel 16 manually

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 || 951-654-3585
rashaprofessional .com || [email protected]
12
Menu Programming Level Description
Run Set-
ting
M/S Mode: Master/Slave Sets xture on master or slave mode
Pan/Tilt
Settings
Manual pan/tilt:
Yes/No
Sets Pan / Tilt
X Reverse : Yes/No Sets Pan reverse
Y Reverse: Yes/No Sets Tilt reverse
Dim Curve Liner Set Liner Dimmer Curve
Log Set Log Dimmer Curve
S-Curve Set S Dimmer Curve
Square Root Set Square root Dimmer Curve
Square Set Square Dimmer Curve
If No DMX Power On : Middle/
Auto/User/No E󰀨ect
Sets Cong option if DMX signal lost
Runtime: Shutter
o󰀨/Keep
Sets Cong option if DMX signal lost
Advance
Settings
ADJ Input password
Language English/ Chinese Sets Language
Ignore Err Raster Waveform
:Yes/No
Factory
setting
Input password Sets Factory reset
ADJ Recover Input password Sets ADJ Factory reset
Info DMX Value Chn01:000
Chn02:000
Chn03:000
......
Chn30
Error Error messages Displays Error xture error massage
Led UsagesTimes:
00000hr
Show Fixtures used hours
Clear times Clear used hours
Test Mode Fan test Test fans
Auto gobo Fit : Yes/
No
Sets Auto gobo
Auto Prism Fit: Yes/
No
Sets Auto prism

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 || 951-654-3585
rashaprofessional .com || [email protected]
13
CONTROL PANEL
DMX Input:
DMX Output:
Main Input:
Mains Output:
Fuse:
For DMX 512 link, use 3 pin DMX cable to link the unit together.
For DMX 512 link, use 3 pin DMX cable to link the unit together.
Connect to power supply.
Connect to supply power to the next unit.
Protect the unit from damage of the over current
Power Switch: To ON/OFF machine.

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 || 951-654-3585
rashaprofessional .com || [email protected]
14
DMX CHANNELS
JINX DMX CHART
22CH DMX Value Function
1 0-255 Pan Movement
2 0-255 Pan Fine Movement
3 0-255 Tilt Movement
4 0-255 Tilt Fine Movement
5 0-255 Pan Tilt Movement speed control, from fast to
slow, time from 0.1s to 25.5s
6 0-255 Pan Tilt Movement speed control, from fast to
slow, time from 0.1s to 25.5s
7 0-255 Dimmer ne
8
Strobe
0-3 Close
4-103 Strobe from slow to fast
104-107 Open
108-155 Fast open slow close, from slow to fast
156-207 Fast close slow open, from fast to slow
208-212 Open
213-251 Strobe random, from slow to fast
252-255 Open
9
Color wheel
0-5 White
6-11 White+Color1
12-17 Color1
18-23 Color1+ Color2
24-29 Color2
30-35 Color2+ Color3
36-41 Color3
42-47 Color3+ Color4
48-53 Color4
54-59 Color4+ Color5
60-65 Color5
66-71 Color5 +Color6
72-77 Color6
78-83 Color6+ Color7
84-89 Color7

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 || 951-654-3585
rashaprofessional .com || [email protected]
15
22CH DMX Value Function
90-95 Color7+ Color8
96-101 Color8
102-107 Color8+ Color9
108-113 Color9
114-119 Color9+ White
120-127 Open
128-190 Rainbow e󰀨ect from fast to slow
191-192 Stop
193-255 Rainbow e󰀨ect from slow to fast
10
Static gobo
0-4 White
5-12 Gobo 1
13-20 Gobo 2
21-28 Gobo 3
29-36 Gobo 4
37-44 Gobo 5
45-52 Gobo 6
53-60 Gobo 7
61-76 Gobo 8
77-89 Gobo 1 shake from slow to fast
90-102 Gobo 2 shake from slow to fast
103-115 Gobo 3 shake from slow to fast
116-128 Gobo 4 shake from slow to fast
129-141 Gobo 5 shake from slow to fast
142-154 Gobo 6 shake from slow to fast
155-167 Gobo 7 shake from slow to fast
168-180 Gobo 8 shake from slow to fast
181-201 Open
202-226 8 Gobos forward change from fast to slow
227-228 Stop
229-255 8 Gobos backward change from slow to fast
11
Rotate Gobo
0-5 White
6-15 Gobo 1
16-25 Gobo 2

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 || 951-654-3585
rashaprofessional .com || [email protected]
16
22CH DMX Value Function
11
26-35 Gobo 3
36-45 Gobo 4
46-55 Gobo 5
56-65 Gobo 6
66-75 Gobo 7
76-92 Gobo 1 shake from slow to fast
93-109 Gobo 2 shake from slow to fast
110-126 Gobo 3 shake from slow to fast
127-143 Gobo 4 shake from slow to fast
144-160 Gobo 5 shake from slow to fast
161-177 Gobo 6 shake from slow to fast
178-199 Gobo 7 shake from slow to fast
200-201 Stop
202-191 7Gobos forward change from fast to slow
192-255 7Gobos backward change from slow to fast
12
Rotated gobos rotation
0 No function
1-127 Gobos Rotated position
128-191 Forward rotation from fast to slow
192-255 Backward rotation from slow to fast
13 0-255 Rotated gobos ne rotation
14
Prism
0-63 No function
64-255 3facet Prism e󰀨ect
15
Prism rotation
0-127 Prism Rotated position
128-190 Prism backward rotation from fast to slow
191-192 Stop
193-255 Prism Forward rotation from slow to fast
16 Reserve
17
Frost
0-63 No function
64-255 Frost e󰀨ect
18 0-255 Zoom, from small to big angle
19 0-255 Zoom ne

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 || 951-654-3585
rashaprofessional .com || [email protected]
17
22CH DMX Value Function
20 0-255 Force
21 0-255 Force ne
22
Reset
0-49 No function
50-59 Pan/Tilt Speed mode
60-69 Pan/Tilt Time mode
70-79 Pan/Tilt Cut light
80-89 Close Pan/Tilt Cut light
90-99 E󰀨ect(Color,gobo etc) cut light
100-109 Close E󰀨ect(Color,gobo etc) cut light
110-129 No function
To achieve the following e󰀨ect, push the DMX value to the
appropriate position and hold it still for at least 4s
130-199 No function
200-209 Pan Tilt reset
210-219 E󰀨ect reset
220-229 Total reset
230-255 No function

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 || 951-654-3585
rashaprofessional .com || [email protected]
18
RETURNS
You must send the product prepaid, in the original
box, and with the original packing and accessories.
Rasha Professional will not issue call tags.
Call Rasha and request a Return Merchandise Authorization (RMA)
number before shipping the product. Be prepared to provide the
model number, serial number, and a brief description of the Claim(s)
for the return.
Clearly label the package with an RMA number. Rasha will refuse
any product returned without an RMA number.
DO NOT write the RMA number directly on the box. Instead, write it
on a properly a󰀩xed label.
Once you have received the RMA number, include the following
information on a piece of paper inside the box:
• Your Name
• Your Address
• Your Phone Number
• The RMA number
• A brief description of the problem(s).

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 || 951-654-3585
rashaprofessional .com || [email protected]
19
www.rashaprofessional.com | www.rashalight.com
UNITED STATES – Rasha Professional A/S LLC.
General Information
Address: 1800 Rustin Ave Riverside, CA 92507
Technical Support
Email: [email protected]
Voice: [phone]
[phone]
Outside the U.S. contact the dealer of record. Follow their instructions
to request support or to return a product. Visit our website for contact
details.
CONTACT US