Rasilient ApplianceStor 90 User manual

ApplianceStor 90
High Performance Surveillance Application Server
User Manual

Copyright Notice
All rights, including copyright, in the content of this manual are owned or controlled by
RASILIENT and protected by copyright.No part of this document may be photocopied,
reproduced, or translated into another language without the prior written consent of RASILIENT
Systems, Inc.
Trademarks
All product names or brands mentioned herein are the trademarks of RASILIENT, its
subsidiaries or other respective owners.
Disclaimer
This manual provides information regarding set-up and installation of the product herein.
Nothing herein may be construed as granting any right or license relating to any intellectual
property rights of this manual or product. Unless otherwise provided in the Purchase and Sale
Agreement for this product, manufacturer and distributor of this product will not be liable
whatsoever relating to the distribution and/or use of this product. In addition, manufacturer and
distributor of this product hereby specifically disclaim any express or implied warranties of
merchantability, fitness for a particular purpose, or non-infringement of third party rights in
connection with this product.
Manufacturer of this product has the right to change specifications and product descriptions at
any time without notice.

Contents
About This Manual............................................................................................................................... 2
Conventions........................................................................................................................................ 2
Safety Symbols................................................................................................................................... 3
Safety Precautions.............................................................................................................................. 4
Regulatory and Integration Information.............................................................................................. 6
Regulatory Compliance Identification Numbers............................................................................. 6
Product Regulatory Compliance..................................................................................................... 6
Power Cords ................................................................................................................................... 8
1Introduction................................................................................................................................1-1
1.1 Audience Assumptions .........................................................................................................1-1
1.2 About this Guide...................................................................................................................1-1
1.3 Packing Checklist .................................................................................................................1-1
1.4 Specifications........................................................................................................................1-2
1.5 System Overview..................................................................................................................1-3
1.6 Powerful................................................................................................................................1-3
1.7 Reliable.................................................................................................................................1-4
1.8 Right Size..............................................................................................................................1-4
1.9 Surveillance Class Drives.....................................................................................................1-4
1.10 Optimized..............................................................................................................................1-4
1.11 Open.....................................................................................................................................1-4
1.12 Viewing and Monitoring ........................................................................................................1-5
1.13 Upgradable ...........................................................................................................................1-5
1.14 Easy......................................................................................................................................1-5
1.15 Hot-swappable......................................................................................................................1-5
1.16 Manageable..........................................................................................................................1-5
1.17 System Specification ............................................................................................................1-6
2Component Identification..........................................................................................................2-8
2.1 Motherboard rear I/O............................................................................................................2-8
2.2 Front I/O................................................................................................................................2-9
2.3 Drive Slots Map ..................................................................................................................2-10
2.4 Power Supplies and SSDs .................................................................................................2-10
2.5Graphics Card Ports........................................................................................................... 2-11
3Hardware Installation...............................................................................................................3-12
3.1 Removing/Installing a Drive Tray........................................................................................3-12

3.2 Installing/ Removing a Hard Disk Drive..............................................................................3-14
3.2.1 2.3.1 Installing a Hard Disk Drive................................................................................3-14
3.2.2 Removing a Hard Disk Drive.......................................................................................3-15
3.3 Removing and Installing a PSU Module.............................................................................3-16
3.3.1 Removing a PSU module............................................................................................3-16
3.3.2 Installing a PSU Module..............................................................................................3-16
3.4 Tool-less Blade Slide Installation Instruction......................................................................3-18
4AS90 MSM RAID Build Guide .................................................................................................4-22

List of Figures
Figure 1-1: AS90..........................................................................................................................1-3
Figure 2-1: AS90 Front I/O...........................................................................................................2-9
Figure 2-2: AS90 Drive Slot Map...............................................................................................2-10
Figure 2-3: Power Supplies and SSDs......................................................................................2-10
Figure 2-4: Graphics Ports......................................................................................................... 2-11

List of Tables
Table i European Union Safety Requirements............................................................................. 7
Table 1-1 Introduction of the Manual.........................................................................................1-1
Table 1-2 Packing Checklist......................................................................................................1-1
Table 1-3 Specifications ............................................................................................................1-2

About This Manual
Conventions
Safety Symbols
Safety Precautions
Regulatory and Integration Information

About This Manual
Conventions
To make sure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
Warning:
Provides Information to prevent injury in the process of completing a
task.
Caution:
Provides Information to prevent damage to the components in the
process of completing a task.
Important:
Provides Information required for completing a task.
Note:
Provides Tips to aid in completing a task.

Safety Symbols
The following symbols are placed on some components of the system to alert the user to
potential hazards,
WARNING: Electric Shock Hazard –To reduce risk of injury from electric
shock hazards, do not open this component.
WARNING: Contains No User or Field Serviceable Parts –To reduce the
risk of injury from electric shock hazards, do not open this component.
WARNING: Hot Surface or Component - To reduce risk of injury from a hot
component; allow the surface to cool before touching.
WARNING: Insert Network Interface Only - Any receptacle (e.g. RJ45)
marked with this symbol indicates a network interface connection. To reduce
the risk of electric shock, fire or damage to equipment, do not plug telephone
or telecommunications connectors into this receptacle
WARNING: This symbol, on power supplies or systems, indicates that the
equipment is supplied by multiple sources of power. To reduce the risk of injury
from electric shock, remove all power cords to completely power down the
system.
Weight inkg
Weight in lb
WARNING: This symbol indicates that the component exceeds the
recommended weight for one individual to handle safely. To reduce the risk
of personal injury or damage to the equipment, observe local occupational
health and safety requirements and guidelines for manual material handling.

Safety Precautions
Technician Notes
Only authorized technicians should attempt to repair this equipment.
Before installing this system, carefully read all the manuals included with the system.
All repair procedures allow only module replacement. Because of the complexity of the
individual boards and sub-assemblies, no one should attempt to make repairs at the
component level or make modifications to any printed wiring board. Improper repairs can
create a safety hazard.
To reduce the risk of personal injury from electric shock and hazardous energy levels, do
not exceed the level of repairs specified in these procedures.
The system is designed to be electrically grounded. To ensure proper operation, plug the
AC power cord into a properly grounded AC outlet only.
Electrostatic Discharge Precautions
Electrostatic discharge (ESD) can damage static sensitive devices or micro circuitry. Proper
packaging and grounding techniques are required to prevent damage.
Keep electrostatic-sensitive parts in their containers until they arrive at a static free work
area.
Use a wrist strap connected to the work surface as well as properly grounded tools and
equipment
Keep the area free of nonconductive materials such as ordinary plastic tools and foam
packing.
Avoid touching pins, leads, or circuitry.
Always place drives with printed circuit board (PCB) assembly-side down.
Grasp cards and boards by the edges. Hold drives by the frame. Avoid touching the solder
joints or pins.
If you need to lay the device down while it is out of the antistatic bag, lay it on the antistatic
bag. Before picking it up again, touch the antistatic bag and the metal frame of the system
unit at the same time.
System Warnings
Avoid dust, humidity, and extreme temperatures; place the system on a stable surface.
To reduce the risk of personal injury from hot surfaces, allow the hot-plug disk modules and
other system modules to cool before touching them.