Ratoc Systems USB-Serial Converter REX-USB60F User manual

USB Serial Converter
USB Serial ConverterUSB Serial Converter
USB Serial Converter
20
2020
201
11
16
66
6.
..
.0
00
05
55
5
Rev. 1
Rev. 1Rev. 1
Rev. 1.0
.0.0
.00
00
0

1
Contents
1.
1.1.
1.Introduction
IntroductionIntroduction
Introduction ................................................................ 2
1-1. Overview.............................................................................. 2
1-2. Packa e Contents ................................................................ 2
1-3. System Requirements and Restrictions .............................. 2
1-4. DB9(RS-232C) connector Pin Assi nment .......................... 3
2
22
2.
..
.I
II
Installation on
nstallation on nstallation on
nstallation on Windows PC
Windows PCWindows PC
Windows PC .................................. 4
2-1. Installation on Windows 10/8.1/8/7/Vista
Server2012 R2/Server2012/Server2008 R2/Server2008........ 4
2-2. Confirmation........................................................................ 8
2-3. Uninstallation on Windows 10/8.1/8/7/Vista
Server2012 R2/Server2012/Server2008 R2/Server2008........ 9
3
33
3.
. .
. Sp
SpSp
Specification
ecificationecification
ecifications
ss
s ............................................................ 11
*All trademarks and lo os are the properties of their respective holders.
*The specifications and pictures are subject to chan e without notice.

2
1.
1.1.
1.Introduction
IntroductionIntroduction
Introduction
1
11
1-
--
-1.
1.1.
1. Overview
Overview Overview
Overview
● REX-USB60F is a USB to serial converter.
Compatible with Universal Serial Bus specifications Rev. 1.1.
● Up to 230.4Kbps data transfer rate.
● Standard USB (A type Male)
Easy to connect PC.
●Virtual COM port driver
REX-USB60F can be used with FTDI’s
VCP drivers to provide a COM port on
a PC.
●LED indicators
REX-USB60F has “PWR/TXD/RXD”
LED indicators for monitorin
communication status.
PWR: power / TXD: transmit / RXD: receive
1
11
1-
--
-2
22
2.
..
. Packa e C
Packa e C Packa e C
Packa e Contents
ontentsontents
ontents
This product is shipped with the followin items:
● REX-USB60F USB Serial Converter
● Setup CD-ROM.
● Installation Guide
● Warranty Card in Japanese
1
11
1-
--
-3
33
3.
..
. System Requirements and Restrictions
System Requirements and Restrictions System Requirements and Restrictions
System Requirements and Restrictions
Host machine
●Windows PC with free Standard USB A type port
Operatin System
● Windows 10, Windows 8.1, Windows 8, Windows7, Windows Vista
● Windows Server 2012 R2, Windows Server 2012, Windows Server 2008 R2,
Windows Server 2008

3
1
11
1-
--
-4
44
4.
..
. DB9(
DB9(DB9(
DB9(RS
RSRS
RS-
--
-232C
232C232C
232C)
))
) connector
connector connector
connector Pin Assi nment
Pin Assi nmentPin Assi nment
Pin Assi nment
The pin assi nment of the connector is below:
This DB9pin connector is compatible with ANSI/EIA/TIA-574 specifications.
Pin#
Pin#Pin#
Pin#
Si nal
Si nal Si nal
Si nal
Name
NameName
Name
Direction
DirectionDirection
Direction
DTE
DTEDTE
DTE –
––
– DCE.
DCE. DCE.
DCE. Meanin
MeaninMeanin
Meanin
1 DCD <--- Data Carrier Detected
2 RXD <--- Received Data
3 TXD ---> Transmitted Data
4 DTR ---> Data Terminal Ready
5 GND - Si nal Ground
6 DSR <--- Data Set Ready
7 RTS ---> Request to Send
8 CTS <--- Clear to Send
9 RI <--- Rin Indicator
D-Sub9pin Male
1 2 3 4 5
6 7 8 9
Anchor [
#4
-
40
]
For usin inch screw

4
2
22
2.
..
. Installation
Installation Installation
Installation on
on on
on Windows PC
Windows PCWindows PC
Windows PC
Please make sure that the Windows PC meets the followin specifications:
• USB port is Standard-USB A
• Windows version is Vista or later
2
22
2-
--
-1.
1.1.
1. Installation
Installation Installation
Installation on Windows 10/8.1/8/7/Vista/
on Windows 10/8.1/8/7/Vista/on Windows 10/8.1/8/7/Vista/
on Windows 10/8.1/8/7/Vista/
Server 2012
Server 2012Server 2012
Server 2012 R2/Server2012
R2/Server2012R2/Server2012
R2/Server2012/Server 2008 R2/ Server 2008
/Server 2008 R2/ Server 2008/Server 2008 R2/ Server 2008
/Server 2008 R2/ Server 2008
Before connectin the REX-USB60F USB serial converter to a USB port,
follow the instructions below:
1) Insert the setup CD-ROM for the REX-USB60F into your CD-ROM drive.
Navi ate to the [Setup] folder on the CD that contains the USB60F_Setup.exe
Double click USB60F_Setup.exe.
2) A “User Account Control” dialo box may appear.
Click [Yes] to proceed with the installation.

5
3) The InstallShield Wizard for RATOC REX-USB60F Installer will start.
Click [Next] to proceed with the installation.
4) A “RATOC REX-USB60F Installer“ will start.
Click [Install] to proceed with the installation.

6
5) A “Windows Security” dialo box will appear.
Click [Install] to proceed with the installation.
6) A “Windows Security” dialo box will appear a ain.
Click [Install] to proceed with the installation.

7
7) The screen will automatically complete and then chan e to the one below:
Click [Finish]. The “RATOC REX-USB60F Installer” has finished.
Connect the REX-USB60F to a spare USB port on your PC.
The necessary drivers will be found.
It will start installation and automatically finish.
Proceed to (2-2) Confirmation of settin REX-USB60F to confirm the
installation has finished properly.

8
2
22
2-
--
-2
22
2.
..
. Confirmation
ConfirmationConfirmation
Confirmation
For confirmin the installation has finished properly.
Open the Device Mana er and select “View > Devices by Connection”.
Under the “Ports(COM/LPT)”cate ory, the label “USB Serial Port” with an
additional COM port will appear.
If the label “USB Serial Port” shows without yellow “!” mark, the installation is
done properly.

9
2
22
2-
--
-3
33
3.
..
. Uninstallation on Wind
Uninstallation on Wind Uninstallation on Wind
Uninstallation on Windo
oo
ows 10/8.1/8/7/Vista
ws 10/8.1/8/7/Vistaws 10/8.1/8/7/Vista
ws 10/8.1/8/7/Vista
Server 2012
Server 2012Server 2012
Server 2012 R2/
R2/R2/
R2/Server 2012/S
Server 2012/SServer 2012/S
Server 2012/Server 2008
erver 2008erver 2008
erver 2008 R2/Server 2008
R2/Server 2008R2/Server 2008
R2/Server 2008
Open the [Pro ram and function] at the [Control Panel].
Select the [RATOC REX-USB60F Installer] and click [Uninstall].
The InstallShield Wizard for RATOC REX-USB60F Installer will start.
The followin dialo will appear. Click [Yes] to proceed with the uninstallation.

10
The screen will automatically complete and then chan e to the one below:
Click [Finish] to finish with the uninstallation.

11
3
33
3.
..
. Specification
Specification Specification
Specifications
ss
s
Product Name REX-USB60F
Serial Input/Output level
RS-232C level
USB Specification
USB(Universal Serial Bus) Specifications Rev. 1.1
Connector
USB ：Standard-USB Type A male
RS-232C：D-Sub9 male (with anchor [#4-40])
Number of I/O ports
1 port
Unit Dimensions
3.35[L] x 1.1[W] x 0.43[H] in (85[L] x 28[W] x 11[H] mm)
Cable Len th
Approx. 2.83 ft (85 cm)
Wei ht
0.194 oz (55 )
Data transfer mode
Asynchronous (Start stop synchronization)
Data transfer Rate (Baud)
300/600/1,200/2,400/4,800/9,600/19,200/38,400
57,600/115,200/230,400 bps
Transmit Distance
Within 50ft (15m)
Power Volta e
DC+5V (Powered for USB Bus)
Power Consumption
Avera e: 36mA(5V) Max.: 60mA(5V)
Serial Parameter
Data bit: 7/8 Start bit:1 Stop bit: 1/2
Parity bit: even/odd/none
RS-232C connector
D-SUB9PIN RS-232C connector Male
ANSI/EIA/TIA-574
LED Indicators
PWR：Power LED
If 5V power from USB bus is properly supplied
from USB bus, this indicator LED will be on.
TXD：Transmit data indicator (Host to Device)
RXD：Receive data indicator (Device to Host)
Operatin Environment
Temperature: 32ºF to 122ºF (0ºC to 50ºC)
Humidity: 10 to 90% (non condensin )
Stora e Environment
Temperature: -4ºF to 149ºF (-20ºC to 65ºC)
Humidity: 10 to 90％ (non condensin )
Note:
1. Do not remove while the application is communicatin . System will be
unstable.
2. Do not operate to suspend while the application is communicatin .
System will be unable to resume properly.
3. This product does not support the serial mouse for connectin to RS-232C
port.

12