Raymarine SmartPilot X-5 ST6002 Controller User manual

D10625-1
®
86131-1
Tiller System
Quick Reference Guide
SmartPilot X-5
ST6002 Controller
Use disp to adjust lighting level.
Wait 10 sec to return to previous mode.
Use -1 or +1 to adjust response level.
Press disp to return to previous mode.
1 sec1 sec
Auto Tack
STARBOARD
Auto Tack
PORT
Wind
Wind
Wind
WIND
Autopilot response controls course keeping accuracy.
Higher response settings keep a tighter course but
increase the amount of drive activity and battery use.
Set to a level appropriate for your needs
To Adjust Lighting Level
To Automatically Steer
to a Fixed Wind Angle
Autotack To Adjust Autopilot
Course-keeping Accuracy
Refer to the SmartPilot X-5 Tiller Operating
Guide for details
GMA
GMA
GMA
GMA
GMA

55˚
85˚
D10126-1
Display Layout To activate the Autopilot
For Manual Control
To change the
Autopilot Heading
To follow a Route
set on a Chartplotter
standby
Press for
Manual Control
auto
Press to activate
the Autopilot
track
When the Autopilot
is activated, press
to follow a route
from a connected
navigation system.
Press again to accept
the new course
course change keys
Port 1˚ Starboard 1˚
Port 10˚ Starboard 10˚
disp
Press to display
data pages
Press for 1 second
for lamp control
Press for 3 seconds
for power off
x3x3 OK?OK?
Attach
TillerPilot
1
Remove
TillerPilot
2
2
1
3
GMA
GMA
GMA
GMA
GMA
GMA
GMA
GMA
GMA
GMA