Raymarine SmartPilot ST6002 User manual

55˚
85˚
Display Layout To activate the Autopilot
For Manual Control
To change the
Autopilot Heading
Press for
Manual Control
Press to activate
the Autopilot
When the Autopilot
is activated, press
to follow a route
from a connected
navigation system.
Press again to accept
the new course
Port 1˚ Starboard 1˚
Port 10˚ Starboard 10˚
Press to display
data pages
Press for 1 second
for lamp control
Press for 3 seconds
for power off
GMA
GMA
GMA
GMA
GMA
GMA
standby auto
course change keys
disp track
x3
D10725-1

Use disp to adjust lighting level.
Wait 10 sec to return to previous mode.
Use -1 or +1 to adjust response level.
Press disp to return to previous mode.
1 sec1 sec
To Adjust Lighting Level
To Adjust Autopilot
Course-keeping Accuracy
To follow a Route
set on a Chartplotter
OK?OK?
GMA
GMA
GMA
GMA
Autopilot response controls course keeping accuracy. Higher
response settings keep a tighter course but increase the amount of
drive activity and battery use.
Set to a level appropriate for your needs
®
Sport System
Quick Reference Guide
ST6002 Controller
SmartPilot X-5
Raymarine Ltd, Anchorage Park, Portsmouth, Hampshire PO3 5TD, UK
Raymarine Inc, 21 Manchester Street, Merrimack, NH 03054,USA
Document Number: 86129-1 Date: March 2008
[phone]
[phone]
D10724-1