•How do I connect my new Razer Hammerhead True Wireless earbuds to my
Bluetooth capable device?
Keeping within 1 meter of your mobile device, open the charging case lid without taking
out the earbuds and ensure there’s enough battery power by checking the LED indicator
on the charging case. The Razer Hammerhead True Wireless is now in Bluetooth
pairing mode.
Navigate to your device’s Bluetooth settings to turn on Bluetooth, then scan for and
connect to “Razer Hammerhead TWS (2nd Gen)”. You will hear an audible cue
“Bluetooth Connected” from the earbuds to confirm that they are connected to
your device.
Note: Once the earbuds have been paired to a device, they will automatically try to
connect to the last paired device every time the charging case’s lid is opened, or when
the earbuds are powered on.
•How long does the battery last on the new Razer Hammerhead
True Wireless?
LIGHTING OFF / ANC OFF
Up to 32.5 hours: 6.5 hours on earbuds + 26 hours from case (4 recharges of earbuds)
Tested with iOS device at 50% volume.
LIGHTING ON / ANC OFF
Up to 27.5 hours: 5.5 hours on earbuds + 22 hours from case (4 recharges of earbuds)
Tested with iOS device at 50% volume and brightness on Breathing effect.
LIGHTING OFF / ANC ON
Up to 22.5 hours: 4.5 on earbuds + 18 hours from case (4 recharges of earbuds)
Tested with iOS device at 50% volume and Active Noise Cancellation on.
LIGHTING ON / ANC ON
Up to 20 hours: 4 hours on earbuds + 16 hours from case (4 recharges of earbuds)
Tested with iOS device at 50% volume and brightness on Breathing effect and Active
Noise Cancellation on.
•How do I get the most out of my new Razer Hammerhead True Wireless?
Download and install the Razer Audio mobile app on the iOS or Android app stores. The
app allows you to select various EQ settings or customize your own, control Razer
Chroma RGB lighting effects and brightness, remap touch gestures, check battery status
