Razer RZ01-0257 User manual

DTD:02072018
User manual For RZ01-
0257
(Consist Gaming Mouse
Mo el: RC30-025701
an
USB Dongle Mo el:
DGRFG6)

FOR G AME R S. BY G A M E RS.
™
1
PACKAGE CONTENTS / SYSTEM REQUIREMENTS
PACKAGE CONTENTS
Gaming mouse ( Mo el:RC30-025701)
USB Dongle ( Mo el:DGRFG6)
USB wireless receiver a apter
USB to Micro-USB cable
Important Pro uct Information Gui e
SYSTEM REQUIREMENTS
PRODUCT REQUIREMENTS
PC with a free USB port
RAZER SYNAPSE 3 REQUIREMENTS
Win ows® 7 64-bit (or higher)
Internet connection
500 MB of free har isk space

FOR G AME R S. BY G A M E RS.
™
2
REGISTRATION / TECHNICAL SUPPORT
REGISTRATION
Register your pro uct online at razeri .razer.com/warranty to get real-time information on your
pro uct’s warranty status.
If you haven’t registere for a Razer ID yet, register now at razeri .razer.com to get a wi e range of
Razer benefits.
TECHNICAL SUPPORT
What you’ll get:
2 years limite manufacturer’s warranty.
Free online technical support at support.razer.com.
Your product’
s serial
number can be found

FOR G AME R S. BY G A M E RS.
™
3
DEVICE LAYOUT
A. Left mouse button
B. Right mouse button
C. Scroll wheel
D. DPI stage up
E. DPI stage own
F. Mouse button 5
G. Mouse button 4
H. Ultraslick mouse feet
I. True 16,000 DPI 5G optical sensor
J. Profile in icator
K. Profile button
L. Power on/off button
M. Bottom cover
N. USB wireless receiver
O. USB to Micro-USB cable
P. USB wireless receiver a apter
Default DPI stages are as follows: 800, 1800, 4500, 000, and 16000. The DPI stages can be
customized using Razer Synapse 3.

FOR G AME R S. BY G A M E RS.
™
1
SETTING UP YOUR RAZER LANCEHEAD WIRELESS
CHARGING YOUR RAZER LANCEHEAD WIRELESS
Using the inclu e USB to Micro-USB cable, plug your Razer Lancehea Wireless to the computer.
This connection also acts as the wired mode for your Razer device.
For best results, please fully charge your Razer Lancehea Wireless before using it for the first time. A
eplete battery will be fully charge in approximately 4 hours. If the Razer Lancehea Wireless has
not been use for an exten e perio , you may nee to recharge it before use.
The Razer Lancehea Wireless requires a USB connection that is able to supply sufficient power to
charge the battery. The battery charging process of the Razer Lancehea Wireless may be affecte if
connecte to a non-powere USB hub or non-powere USB ports foun on certain keyboar s an
other peripherals. When in oubt, it is preferable to connect the Razer Lancehea Wireless irectly to
the USB port of your computer.
LOW POWER INDICATOR
The Razer Lancehea Wireless’s scroll wheel will blink re twice in repeate intervals to in icate that
the battery’s power is less than 5%. This lighting sequence will repeat until the battery is raine or
the mouse is connecte to the PC via the USB to Micro-USB cable.

FOR G AME R S. BY G A M E RS.
™
2
USING THE USB WIRELESS RECEIVER COMPARTMENT
1. Remove the bottom cover of your Razer Lancehea Wireless.
2. Remove the USB wireless receiver from your PC an place it into the storage space.
3. Reattach the bottom cover onto the Razer Lancehea Wireless an make sure it is securely
fastene .

FOR G AME R S. BY G A M E RS.
™
3
USING THE USB WIRELESS RECEIVER
1. Plug the USB wireless receiver into your PC’s USB port.
2. Switch on the Razer Lancehea Wireless.
Your Razer Lancehea Wireless is now rea y for use in wireless mo e.
POWER ON
POWER OFF

FOR G AME R S. BY G A M E RS.
™
4
USING THE USB WIRELESS RECEIVER ADAPTER
Use the USB wireless receiver a apter to easily access an exten the reach of your USB wireless
receiver.

FOR G AME R S. BY G A M E RS.
™
5
INSTALLING RAZER SYNAPSE 3 FOR YOUR RAZER LANCEHEAD WIRELESS
Step 1: Make sure the USB wireless receiver is connecte to the USB port of your computer.
Step 2: Install Razer Synapse 3 when prompte * or ownloa the installer from razer.com/synapse.
Step 3: Create your Razer ID or log into Razer Synapse with an existing account.
*Applicable for Windows 8 or later.

FOR G AME R S. BY G A M E RS.
™
6
CONFIGURING YOUR RAZER LANCEHEAD WIRELESS VIA RAZER SYNAPSE 3
STORED PROFILES
Your Razer Lancehea is capable of storing up to 5 profiles from Razer Synapse Pro, which you can use
on systems that o not have Razer Synapse installe . Your Razer Lancehea can also store your
current profile temporarily until it is replace with a new active profile. Pressing the Profile button will
cycle from the current profile to profiles 1 to 4. The profile in icator will change its color to show
which profile is presently selecte .
Designate color
Active profile White
Profile 1 Re
Profile 2 Green
Profile 3 Blue
Profile 4 Cyan