Razer Orochi Use and care manual

MASTER GUIDE (PC)
CONTENTS
1. System & Hardware Requirements
2. Package Contents
3. Key Features
4. Installation / Registration / Technical Support
5. Configuring Your Razer Orochi
6. Using Your Razer Orochi
7. Safety And Maintenance
8. Legalese
The Razer Orochi™ brings mobile gaming mouse standards to new heights with its small form factor and
bleeding-edge technology. Equipped with a gaming-grade laser sensor and dual mode wired/wireless
functionality, the Razer Orochi uses gaming optimized Bluetooth® technology to address your need for
portability and ease of use with a wired mode option for gaming grade performance.
Gaming on the go is now possible.
1. SYSTEM & HARDWARE REQUIREMENTS:
• Bluetooth® enabled PC with USB Port
• Windows® XP/ x64/ Vista/ Vista64
• Internet connection (for driver installation)
• 35MB of free hard disk space
2. PACKAGE CONTENTS
• Razer Orochi Gaming Mouse
• 2x AA Battery
• USB Cable
• Travel Pouch
• Certificate of Authenticity
• Quick Start Guide
• Master Guide (PC)
• Master Guide (MAC)

3. KEY FEATURES
Default button assignments (PC)
A Mouse Button 1 – Click
B Mouse Button 2 – Menu
C Mouse Button 3 – Scroll Wheel and Button
D Battery / Pairing Indicator
E Mouse Button 5 – Forward
F Mouse Button 4 – Backward
G Mouse Button 6 – Sensitivity Stage Up
H Mouse Button 7 – Sensitivity Stage Down
I Razer Precision™ 3G Laser Sensor
J Power On / Off Switch
K Gaming Optimized Bluetooth Connectivity
L Ultraslick™ Teflon® Feet
M 1000Hz Ultrapolling™ / 1ms Response Time (Wired mode)
N Razer Synapse™ On-board Memory
O Connector Jack for Micro-USB End of Cable (Wired Mode)

4. INSTALLATION / REGISTRATION / TECHNICAL SUPPORT
[WIRELESS MODE]
1. Remove the top cover of the Razer Orochi.
2. Insert the batteries into the Razer Orochi following the directions indicated.
3. Reattach the top cover onto the Razer Orochi. Please ensure it is secured.
4. Switch on the Razer Orochi.
5. Please ensure that Bluetooth is activated on your Mac. ‘Add a Bluetooth device’ by following the
instructions for your operating system. Activate the pairing process by depressing all four side buttons
together on the Razer Orochi for five seconds. The indicator lights on the top of the Razer Orochi will
blink in blue to indicate the pairing process.

6. When the pairing process is completed, the indicator light will stop blinking. Your Razer Orochi is then
ready for use in wireless mode.
[WIRELESS MODE]
1. Connect the micro-USB end of the cable to the Razer Orochi.
2. Plug the mouse into the USB port of your computer. The Razer Orochi is then ready for use as a high
performance wired gaming mouse.
DRIVER INSTALLATION
Windows XP / x64 / Vista / Vista64 installation instructions
Step 1: Download the Driver Installer from http://www.razersupport.com/
Step 2: Unzip the file and run the installer.
Step 3: The Razer Orochi setup screen appears. Click NEXT.
Step 4: Read the license agreement. Click YES if you accept all terms of the agreement.
Step 5: Enter your information. Click NEXT.

Step 6: Choose your installation setup. Click NEXT.
Step 7: If everything is correct. Click INSTALL to begin installation.
Step 8: At the end of the installation, click FINISH to complete the installation.
Step 9: Follow the instructions onscreen to restart your computer. Click YES.
REGISTERING YOUR RAZER OROCHI
Please visit www.razerzone.com/registration/ for online product registration.
What you’ll get:
• 2 years limited manufacturer’s warranty
• Free online technical support at www.razersupport.com.
!
BATTERY / PAIRING INDICATOR BEHAVIOR
The Razer Orochi has a battery indicator on its top cover, which displays the status of battery life. While in
pairing mode, the indicator will be blinking in blue.
!
NOTE:
• High performance batteries are recommended for longer battery life.
• To conserve power, switch off the Razer Orochi when not in use.
IMPORTANT NOTE: Scroll wheel light is off by default. You can turn it on in the LIGHTING AND
MAINTENANCE TAB.

5. CONFIGURING YOUR RAZER OROCHI
IMPORTANT NOTE:
Configuration of the Razer Orochi can only be performed in Wired Mode.
It is not possible to configure it in Wireless Mode.
INSTALLING YOUR RAZER OROCHI IN WIRED MODE
1. Connect the micro-USB end of the cable to the Razer Orochi.
2. Plug the mouse into the USB port of your computer. The Razer Orochi is then ready for configure.
RAZER SYNAPSE™ ONBOARD FUNCTIONS
All settings will be saved on the profile selected and will apply on another computer even without the Razer
Configurator installed.
(Note: On-The-Fly Sensitivity requires the Razer Orochi driver to be installed)

ASSIGN BUTTONS TAB
In the Assign Buttons tab, you can assign various functions to each of the buttons based on your own
preferences.
The following functions are possible:
CLICK
Perform a normal mouse click.
MENU
Open a context-sensitive menu.
UNIVERSAL SCROLLING
Activate universal scrolling by clicking and holding the assigned button. Drag your Razer Orochi to scroll in
the direction of the mouse movement.
DOUBLE CLICK
Perform a double click with the assigned button.
MACRO
If the button function or key is not listed, or if you would like to assign a macro to a button, select “Macro”
from the dropdown menu. In addition, all saved macros will be shown on a sub dropdown menu for quick
selection when you mouse over the “Macro ”option.

PROFILE SETTINGS
Switch to a profile on the fly and immediately load all your preferred mouse settings. When you select
“Profile Settings” from the dropdown menu, a sub-menu will appear and allow you to choose desired profile
to switch to.
FORWARD
Assign a “Forward” command in Windows Explorer / Internet Explorer.
BACKWARD
Assign a “Back” command in Windows Explorer / Internet Explorer.
ON-THE-FLY SENSITIVITY
Enable change of sensitivity settings on the fly without the need to enter the configuration menu.
SINGLE KEY
Activate a key on your keyboard.
SCROLL UP
Scroll up the page you are currently viewing.
SCROLL DOWN
Scroll down the page you are currently viewing.
BUTTON OFF
Disable any function on the assigned button.

ADJUST PERFORMANCE TAB
CURRENT SENSITIVITY
Sensitivity is how much your cursor moves on the screen in relation to your physical movement of the
mouse. A higher sensitivity value would translate to less physical movement of the mouse, and vice versa.
In the ADJUST PERFORMANCE tab, the current sensitivity of your Razer Orochi in dots per inch (DPI) is
indicated and can be easily adjusted by moving the arrow along the slider in steps of 125DPI and up to
4000DPI.
NOTE:
In Wireless mode, the maximum sensitivity of Razer Orochi is limited to 2000DPI.
For greater flexibility in adjustment, you can select the “Enable independent X-Y sensitivity” option and
move the individual X and Y arrows along the slider.
NOTE:
The Independent X-Y sensitivity feature is not available in Wireless mode
To display the On-The-Fly Sensitivity indicator onscreen whenever you make changes on the fly, select the
“Enable On-The-Fly sensitivity on-screen display” option.