Razer RZ01-0342 User manual

DATE: 24 APRIL 2020
PRODUCT MANUAL FOR GAMING MOUSE
GAMING MOUSE MODEL: RZ01-0342
USB DONGLE MODEL: DGRFG7
.

WHAT’S INSIDE / WHAT’S NEEDED
WHAT’S INSIDE
Gaming mouse (Gaming mouse model: RZ01-0342, USB Dongle: DGRFG7)
A. Left mouse button
B. Right mouse button
C. Scroll wheel
D. Left tilt-click —repeat scroll down
E. Right tilt-click —repeat scroll up
F. DPI stage up
G. DPI stage down
H. Ultraslick mouse feet
I. Razer™ Focus+ 20K DPI Optical
Sensor
J. Profile indicator
K. Profile button
L. Slider switch
•Razer™ HyperSpeed
Wireless (2.4 Ghz) mode
•Power off mode
•Bluetooth mode
M. 12-button side plate
(recommended for MMOs)
N. 7-button side plate
(recommended for MOBAs)
O. 2-button side plate
(recommended for general use)
Razer™ Speedflex charging cable USB dongle adapter
Important Product Information Guide
The DPI stages are as follows: 400, 800, 1600 (default), 3200 and 6400. The DPI stages
can be customized using Razer Synapse.
WHAT’S NEEDED
PRODUCT REQUIREMENTS
PC with a free USB port or Bluetooth 5.0 connectivity
FOR GAMERS. BY GAMERS.™1

RAZER SYNAPSE REQUIREMENTS
Windows® 7 64-bit (or higher)
Internet connection for software installation
LET’S GET YOU COVERED
You’ve got a great device in your hands, complete with a 2-year limited warranty coverage.
Now maximize its potential and score exclusive Razer benefits by registering at
razerid.razer.com
FOR GAMERS. BY GAMERS.™1

Got a question? Ask the Razer Support Team at support.razer.com
Your product’s
serial number can
be found here.
FOR GAMERS. BY GAMERS.™2

GETTING STARTED
CHANGING THE SIDE PLATE
Pull from the bottom of the side plate to remove and then replace it with the preferred side
plate. It’s recommended that you unplug the mouse first before changing side plates.
To customize each side plate’s button assignments, please install Razer Synapse.
FOR GAMERS. BY GAMERS.™3

CHARGING YOUR MOUSE
Plug the charging cable from your computer’s USB port to your Razer Naga Pro. For best
results, please fully charge the mouse before using it for the first time. A depleted battery will
be fully charged in approximately 4 hours. This connection also acts as the wired mode for
your Razer device.
The Razer Naga Pro requires a USB connection that can supply sufficient power to
charge the device. The charging process may be affected when connecting to a non-
powered USB hub or non-powered USB mostly found on keyboards and peripherals. It’s
recommended to always connect the Razer Naga Pro directly to the USB port of your
computer.
LOW POWER INDICATOR
The scroll wheel will blink red twice in repeated intervals to indicate that its battery’s power is
less than 5%. This lighting sequence will repeat until the battery is drained or the mouse is
connected to the PC via the charging cable.
FOR GAMERS. BY GAMERS.™4

CONNECTING YOUR MOUSE
VIA RAZER™ HYPERSPEED WIRELESS (2.4 GHZ) MODE
1. Remove the attached side plate from the mouse to remove the wireless USB dongle.
2. Reattach the side plate and insert the wireless USB dongle into the USB port of your
PC.
3. Push the slider switch to Razer™ HyperSpeed Wireless (2.4 GHz) mode.
FOR GAMERS. BY GAMERS.™5

Your Razer Naga Pro is now ready for use in wireless mode.
VIA BLUETOOTH MODE
1. Push the slider switch to Bluetooth mode ( ).
2. Press and hold the Profile button, and the DPI stage up and DPI stage down buttons
simultaneously for three seconds to activate pairing mode. The Razer logo will blink
twice in repeated intervals to show that the device is in pairing mode.
3. Activate Bluetooth on your device, search for new Bluetooth devices, and select “Razer
Naga Pro” from the list of devices found.
FOR GAMERS. BY GAMERS.™6

4. Wait until the mouse pairs with your device. When paired, the Razer logo will briefly
turn static blue before displaying its current lighting effect.
Once paired, your Razer Naga Pro will automatically reconnect to your device
whenever in Bluetooth mode and within range. Keep the pairing devices within
close proximity of each other for faster and more stable connection.
Congratulations, your Razer Naga Pro is now ready to use in Bluetooth mode.
USING THE WIRELESS USB DONGLE ADAPTER
Use the USB dongle adapter to easily access and extend the reach of your wireless USB
dongle.
FOR GAMERS. BY GAMERS.™7

PERSONALIZING YOUR MOUSE
Use the Razer Synapse app to customize your mouse’s lighting, configure its buttons, and
even create various profiles suited for different playstyles. Your Razer Naga Pro can store up
to 5 profiles from the Razer Synapse app, allowing you to use these profiles even on systems
without the app installed. Pressing the profile button will cycle through the different profiles,
with the profile indicator’s color showing which profile is currently selected.
Install Razer Synapse when prompted or download the installer from razer.com/synapse
Find out more about your feature-packed wireless gaming mouse at support.razer.com
Profile
Designated color
Active
Profile White
Profile 1 Red
Profile 2 Green
Profile 3 Blue
Profile 4 Cyan
Profile indicator
Profile button
FOR GAMERS. BY GAMERS.™8