
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
SYDNEY | MELBOURNE | BRISBANE | PERTH | AUCKLAND
Australia 1300 788 778 www.rba.com.au | New Zealand 0800 722 111 www.rbagroup.co.nz3 of 4
Description
Self closing pillar taps are designed for public areas, available in bright chrome nish cast from dezincication
resistant brass alloy. Single connection to water supply line, to either cold or pre-mixed water.
RBA1015-600 ‘Benet Lever’ Basin Pillar Tap - 6 Star WELS, 4.5Lpm
RBA1043-600 ‘Alpha’ Basin Pillar Tap DR - Chrome - 6 Star WELS, 5.5Lpm
RBA1044-600 ‘RIO’ Basin Pillar Tap DR - Chrome - 6 Star WELS, 4.5Lpm
RBA1047-600 ‘Gooseneck’ Basin Pillar Tap DR - Chrome - 6 Star WELS, 5.5Lpm
Installation
1. Installation must be carried out in accordance with local authority requirements.
2. Flush the line thoroughly, and remove all dirt and grit from the line before connecting the tap.
3. Install the tap in the basin, tightening lightly with spanner or grips.
4. Connection may be made with either exible S/S braided hose, or copper tube and compression ttings.
5. Before turning on the water remove the aerator and ush the tap.
6. Replace the aerator and check for leaks.
7. Fit appropriate coloured indicator to the handle.
Troubleshooting
*To remove the aerator and cartridge, see “Spare Parts” to choose appropriate tool. [Not supplied with the product].
Problem Probable Cause Solution
No ow or low volume Water turned off
Water outlet blocked
Turn on
Remove the blockage
Water ows continuosly
or Short / long ow time
Cartridge blocked with dirt
Cartridge damaged
Valve direction incorrect
Remove and clean*Remove and clean*
Replace the cartridge*Replace the cartridge*
Leak under knob Cartridge damaged Replace the cartridge*Replace the cartridge*