rba RBA8851-137-PP Manual

INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
SYDNEY |MELBOURNE | BRISBANE | PERTH | AUCKLAND
Australia 1300 788 778 | www.rba.com.au New Zealand 0800 722 111 | www.rbagroup.co.nz
SYDNEY |MELBOURNE | BRISBANE | PERTH | AUCKLAND
Australia 1300 788 778 | www.rba.com.au New Zealand 0800 722 111 | www.rbagroup.co.nz
SYDNEY |MELBOURNE | BRISBANE | PERTH | AUCKLAND
Australia 1300 788 778 www.rba.com.au | New Zealand 0800 722 111 www.rbagroup.co.nz
1
Bariatric Toilet RBA8851-137-PP
RBA8851-137-SS
Date 28/09/17
Model Bariatric Toilet
Supercedes all previous
Lic. # WMKA-00291

INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
SYDNEY |MELBOURNE | BRISBANE | PERTH | AUCKLAND
Australia 1300 788 778 | www.rba.com.au New Zealand 0800 722 111 | www.rbagroup.co.nz
SYDNEY |MELBOURNE | BRISBANE | PERTH | AUCKLAND
Australia 1300 788 778 | www.rba.com.au New Zealand 0800 722 111 | www.rbagroup.co.nz
SYDNEY |MELBOURNE | BRISBANE | PERTH | AUCKLAND
Australia 1300 788 778 www.rba.com.au | New Zealand 0800 722 111 www.rbagroup.co.nz
2
Components
“P” Trap Stainless Steel Pan “S” Trap converter
Security bit
Pre-installation
Installation should be in accordance with local authority and statutory requirements,
and as per these installation instructions.
Pan is “wall faced” and should preferably be xed to a masonry wall with
suitable wall anchors provided by others. Supplied with “S” trap converter to
allow either “S” or “P” conguration.
Flushing device should be –
Fowler Tasman Mk 2 (or Stylus Symphony) cistern
Caroma Invisi II (Inceiling mount recommended)
Sloan Dual Flush Valve
Installation
1. If not pre-formed, make sufcient penetrations through the wall, as
determined from the drawing, to allow the 100 mm waste pipe, 50 mm
ush pipe, and, if necessary, 12 mm xing rods to pass through. If front
xed, suitable wall anchors supplied by others.
2. Determine oor mounting location by mocking up.
3. Fit a 100 mm pan collar to the outlet with sufcient 100 mm pipe to extend
through the wall. (Alternately the waste and ush pipes may be preplumbed
and the pan pushed onto the pipework.) If “S” trap conguration
is required, location of oor penetration should be centred 220mm from
nished wall.
4. Similarly t a 50 mm keeseal to the pan inlet with sufcient pipe, as
provided by the cistern manufacturer, to extend through the wall.
5. Push the pan into position and secure the pan to the wall & oor (xings by
others).
6. Make the necessary connections to the waste, and install the cistern and
connect according to the manufacturers instructions.
7. Check for leaks and correct ush volumes, 6 litres full ush and 3 litres half
ush.

INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
SYDNEY |MELBOURNE | BRISBANE | PERTH | AUCKLAND
Australia 1300 788 778 | www.rba.com.au New Zealand 0800 722 111 | www.rbagroup.co.nz
SYDNEY |MELBOURNE | BRISBANE | PERTH | AUCKLAND
Australia 1300 788 778 | www.rba.com.au New Zealand 0800 722 111 | www.rbagroup.co.nz
SYDNEY |MELBOURNE | BRISBANE | PERTH | AUCKLAND
Australia 1300 788 778 www.rba.com.au | New Zealand 0800 722 111 www.rbagroup.co.nz
3
Installation
Front Fixed Shown
1 Access Panels
2 Optional - RBA8186-853 Big John
Hinged Seat Rated 545kg
3 55mm ID Flushing Inlet:
Keyseal (By Others)
4 Wall Anchors and
Anchoring Hardware (By Others)
5 100mm OD Waste Outlet
6 MountingSlots Ø15mm x 38mm
View From Rear of Fixture
6

INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
SYDNEY |MELBOURNE | BRISBANE | PERTH | AUCKLAND
Australia 1300 788 778 | www.rba.com.au New Zealand 0800 722 111 | www.rbagroup.co.nz
SYDNEY |MELBOURNE | BRISBANE | PERTH | AUCKLAND
Australia 1300 788 778 | www.rba.com.au New Zealand 0800 722 111 | www.rbagroup.co.nz
SYDNEY |MELBOURNE | BRISBANE | PERTH | AUCKLAND
Australia 1300 788 778 www.rba.com.au | New Zealand 0800 722 111 www.rbagroup.co.nz
4
Warning
Do not mix different cleaning solutions.
Always read cleaning products label
for proper use and admonishments.
Recommended Cleaning Materials:
• Sponge - natural or articial
• Nylon or other soft-bristle brush
• Microber Cloth
Recommended Cleaning Solutions:
• Hand dishwashing liquid / soft water
solution
• Mild soap / soft water solution
• Soft-Scrub ®
• Comet Soft Cleanser ®
• Clorox ®
• Scrubbing Bubbles ® Gel
Normal Cleaning:
For everyday cleaning use a sponge or
cotton cloth soaked in mild soap and
wipe-down surface. In industrial or marine
locations close attention should be paid to
regular care due to harsher atmosphere.
To remove dirt and debris:
Fixture should be periodically washed with
a diluted solution of a mild non-abrasive
detergent (e.g. Dawn ®) in cold or ambient
temperature water using a soft non- abrasive
cloth or chamois.
Toilet Fixtures with Enviro-Glaze/ Powder
Coating
Never use a plumber’s snake to clear severe
clogs. The use of the tool will damage
the nish, scratch the paint and cause
corrosion voiding the warranty. Fixture must
be dismounted from the structure sewer
connection (oor/wall) and the snake used
from the connection into the sewer. Any clog
in the xture trap can be accessed from the
outlet of the trap after dismounting.
Cleaning Solutions NOT to be used:
• Kaboom ®
• Lysol ® Gel
• Lysol ® Cling
• The Works
• Petrol products
• Acetates
• Abrasive powders
• Scouring pads
• Toilet cleaners
• Ceramic tile cleaners
• Cleaners containing more than 1%
ammonia
• Cleaners containing acids or lye
• Cleaners containing enzymes
Things to Avoid:
• Excessively hot solutions
• Cleaning with a metal brush can scratch
or mark the nish which can cause
corrosion voiding the warranty
• Using any solvent based solution or
abrasive type cleaners
• Applying excessive force during the
cleaning process
Cleaning & Care