re:3D GIGABOT VIKI 2.0 User manual

think big,
print huge
viki 2.0
installation

Rev. october 2015

THANK YOU FOR PURCHASING THE VIKI 2.0 INSTALLATION
RETROFIT KIT FROM re:3D Inc.®!
REFERENCES & HELPFUL DOCUMENTS :
VIDEO INSTRUCTIONS :
This upgrade will let you replace your old Viki LCD with the newer Viki 2.0 LCD. You will find
that this is especially helpful for using and controlling your Gigabot® without connecting
to a computer. Unlike its predecessor, the Viki 2.0 also sports a new black faceplate and
provides better visual indication of print conditions with new features like a dual-color LED
ring around the knob.
Some external resources may be helpful during the assembly process. For example,
knowing the correct names for dierent parts on the Gigabot®, or proper use of certain
tools. Resources that we thought may be helpful have been linked to at the end of this
guide.
If you prefer a video guide, please search for “re3D Tech” on YouTube and find our “Viki 2.0
Installation” video.
introduction

READ INSTRUCTIONS : All the safety and operating instructions should be read before the printer is
operated.
RETAIN INSTRUCTIONS : The safety and operating instructions should be retained for future reference.
HEED WARNINGS : All warnings on the product and in the operating instructions should be adhered to.
FOLLOW INSTRUCTIONS : All operating and use instructions should be followed.
CLEANING : Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol
cleaners.
ATTACHMENTS : Do not use attachments or enhancements not recommended by the product
manufacturer as they may cause hazards.
WATER AND MOISTURE : Do not use Gigabot near water - for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
PLACEMENT : Do not place this product on an unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only
with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product.
Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
VENTILATION : Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from overheating, and these openings must not be blocked
or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other
similar surface. This product should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
POWER SOURCES : This product should be operated only from the type of power source indicated on
the marking label. If you are not sure of the type of power supply to your home consult your appliance
dealer or local power company. For products intended to operate from battery power, or other sources,
refer to the operating instructions.
GROUNDING OR POLARIZATION : This product may be equipped with either a polarized 2-wire AC
line plug (a plug having one blade wider than the other) or a 3-wire grounding type plug, a plug having
a third (grounding) pin. The 2-wire polarized plug will outlet, try reversing the plug. If the plug still fails
to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the
polarized plug. The 3-wire grounding type plug will fit into a grounding type power outlet. This is a
safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the grounding type plug.
POWER-CORD PROTECTION : Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where they exit from the product.
LIGHTNING : For added protection for this product during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning and power-line surges.
OVERLOADING : Do not overload wall outlets, extension cords, or integral convenience receptacles as
this can result in a risk of fire or electric shock. A product and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination
to overturn.
OBJECT AND LIQUID ENTRY : Never push objects of any kind into this product through openings as
they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
legalese

table of contents
OVERVIEW 1
LEGEND 2
BEFORE YOU BUILD 3
BUILD GUIDE 5
BILL OF MATERIALS 5
TOOLS YOU’LL NEED 5
A : VIKI REPLACEMENT 6

OVERVIEW
Viki 2.0 Installationre:3D Inc.® 1
*Full Gigabot® rendering is for illustrative purposes only and may not reflect the final
construction of your Gigabot®
New Viki 2.0 LCD
interface
Simple disassembly
and replacement into
existing enclosure

Viki 2.0 Installation re:3D Inc.®2
Objects of importance are
outlined with dotted lines
LEGEND
disconnect
Fasten/screw
remove route
insert place
connect Unfasten/unscrew

Viki 2.0 Installationre:3D Inc.® 3
BEFORE YOU BUILD
it’s hip to be square!
the uses of grease
When assembling the
Gigabot®, it is essential to
work on a flat surface and to
carefully square perpendicular
parts as much as possible.
This is especially important
while assembling the side
plates, Z-axis uprights and
vertical common rails, bed
frame, upper and lower cross
rails, and bridge assembly.
Use large clamps to help
square up frames if needed.
Make good use of grease
during assembly. These
will help hold the eccentric
spacers when installing the
V-groove wheels and also
keep them from damaging
the side plates or end trucks
during adjustment. Likewise,
it will ensure smooth, quiet
operation when applied the
the Z-axis ACME threaded
rods.

Viki 2.0 Installation re:3D Inc.®4
t-nuts, how do they work?
Measuring and marking
T-nuts are an essential part
of assembling the Gigabot®.
These are inserted into the
aluminum extrusion in order
to fasten parts to the frame.
Post assembly T-nuts are
also used. These hold their
positions well without sliding
around, and are useful when
installing retrofits.
There are parts of the
instructions that suggest
marking spots on the
Gigabot® to properly place
parts. When marking, be sure
to only use a pencil--using a
permanent marker will leave
unsightly marks on the metal!

Viki 2.0 Installationre:3D Inc.® 5
BILL OF MATERIALS
BUILD GUIDE
Viki 2.0 with wiring 1
TOOLS YOU’LL NEED
• #1 phillips head screwdriver

A : VIKI REPLACEMENT

Viki 2.0 Installationre:3D Inc.® 7
In electrical box, disconnect
and remove Viki wires
Refer to Azteeg wiring
schematic if needed
Unscrew and remove cable
grommet cap with washer
for Viki cables on electrical
box
A2
A3
WARNING
PLEASE be sure that you have turned o and
unplugged your Gigabot before attempting any
modifications!

Viki 2.0 Installation re:3D Inc.®8
Completely remove Viki
wires from electrical box
Unscrew and remove 4x
screws on enclosure end
plate with cable grommet
using a Phillips head #1
screwdriver
Remove enclosure end
plate with cable grommet
A4
A5
A6

Viki 2.0 Installationre:3D Inc.® 9
Slide out enclosure plate
with Viki attached
If too tight, loosen screws
on other enclosure end
plate to relieve pressure, or
remove altogether
Unscrew and remove cable
grommet cap with washer
for Viki cables from Viki
enclosure
Slide enclosure plate with
connected Viki 2.0 into
enclosure
Don’t forget to insert foam
cube
A7
A8
A9

Viki 2.0 Installation re:3D Inc.®10
If left enclosure end plate
was removed, replace it
now
Before replacing end plate
with grommet, reinsert
rubber washer
Route wiring through
enclosure end plate
grommet
Route wiring in small
bundles if needed
A10
A11
A12

Viki 2.0 Installationre:3D Inc.® 11
Replace enclosure end
plate with cable grommet
Replace grommet cap
Washer may pop out while
routing--press back into
place if needed. Route
wires in small bundles if
needed
Tighten grommet
A13
A14
A15

Viki 2.0 Installation re:3D Inc.®12
Replace washer in electrical
box grommet
For illustrative purposes,
this has been shown on a
dierent grommet
Replace other grommet cap
onto wire bundle
Route wires in small
bundles if needed
Route wires in small
bundles if needed
Route wires through
electrical box grommet
A16
A17
A18

Viki 2.0 Installationre:3D Inc.® 13
Wire Viki 2.0 to Azteeg
according to diagram
Check “References &
Documents” page for links
to more diagrams
Tighten grommet cap
A19
A20
Please look over your completed kit and make sure everything has been assembled
correctly. If you have further questions, please refer to the video instructions (search “re3D
Tech” on YouTube and find “Viki 2.0 Installation” video) or contact us through the channels
listed in the conclusion.
DOUBLE-CHECK YOUR WORK :

Viki 2.0 Installation re:3D Inc.®14
now is a good stopping point...
Acquire beverage of
your choice
Actuate pull tab
Consume