Real Spirit Aqua-Ionizer Pro Air Water Life User manual

UNDERSINK FILTRATION
INSTALLATION
[phone]

1. Only begin these instructions after installing
the ionizer under the sink
2. Remove the two smaller blue clips, closest
to rubber plugs one on each side
3. Remove rubber plugs by depressing
collet fittings to release
4. Locate the green hose coming down from
your faucet and remove it from ionizer
5. After removing the green hose from the
bottom of the ionizer, insert it into either
fitting of filters
6. Take your new loose hose and insert into
remaining fitting of filter and ineert other
end into inlet of ionizer.
Fitting nearest black power

7. Reattach blue locking clips between collet
and elbow fittings where we installled hoses
into the filtration and ionizer.
8. Turn on the water to the ionizer and check
fitting for leaks
9. Run water for 2 minutes to flush out the
filtration. Now you’re ready to drink up!

Questions?
[phone]