will be modified according to the needs that users transmit to us. These are some
special options included in the actual firmwares.
HAT as POV or TRIM. The HAT switch can be modified at any time to behave like a
POV (default) or trim command. This allows during the use of the joystick, the HAT
controls the views or submits your information to 4 HID buttons for use as TRIM, which
is its function in real life.
FULL SCALE CONTROL to select between four possible full scale settings of the axes
X and Y, it adjusts the ratio between the applied force to the joystick and the signal
sent to the computer. Although this looks like a sensitivity adjustment, control is not
exactly the same. This setting is ideal for adjusting joystick response in complex
situations, such as a landing, refueling maneuver, ground attack. The setting values
are FSC 1:1 3:4 1:4 1:2
NEUTRAL POSITION ADJUSTMENT. The adjustment of the neutral position manually
allows exact adjustment of the neutral position of FSSB R3L. In previous models R1
and R2, this adjustment was done through potentiometers on the electronic board, now
is done using digital potentiometers, which are adjusted by the firmware when the user
need, including in the middle of a flight mission.
SOUND/LIGHT. These two options let you independently enable or disable the beep
sound and light signals.
WARNING SOUND LEVEL. Set the percentage for the warning sound level from 1 to
99% and calculated with the actual sensibility and full scale control in 4:4
BFA LEVEL. Adjustable independently in Roll and Pitch, let you select in four steps
from 0 to 10% the level of force applied to break the stable cero position.
MEMORY SLOTS. Four memory slots to save/load custom configurations with
compatible TM grips and 8 memory slots with RS grips.
As other Realsimulator devices, the FSSB-R3L is firmware upgradeable. At the
moment there are the following firmwares available:
•MJF_FW: standard version for modern jet fighters.
•SSF: version for space ships fighters.
•SSF_LH: special version of SSF for left hands users.
Beside the above characteristics, the product is supplied with a firmware update tool
(DCC) to install new versions of firmware and a GUI application (RS_HID_DEV_TOOL)
to configure the device. Both tools can be downloaded inside the same package from
the download’s website.
https://realsimulator.com/downloads/
This User Guide is valid for the FSSB-R3 Lighting model. If you have doubt about the
model you have purchased, you can identify it easily by the aluminum case and the
label. Here you have some pictures to clarify the identification.
