Red Arrow GLW118 User manual

110V 30W LED GLOBE LIGHT
MODELS: GLS30YPW, GLE30YPW
PRODUCT INSTRUCTIONS
110V 30W LED GLOBE LIGHT
MODELS: GLS30YPW, GLE30YPW
PRODUCT INSTRUCTIONS
110V LED WORKLIGHTS WITH TRIPOD
MODELS: GLW118, GLW218
INSTALLATION INSTRUCTIONS
Red Arrow Trading Ltd
Elsworth House, Herries Road South
Sheeld, S6 1QS
Tel: [phone] Fax: [phone]
Email: [e-mail] Web: www.redarrowtrading.com
110V
1x18W/
2x18W
6500K
IP54
1500lm* IK05
I N T R O D U C T I O N
The 110V LED Tripod Work Light is designed for use in a busy site
environment, where the need for a quick deployment and a powerful light
source is required. The LED Tripod is height adjustable, nished in yellow and
comes with a 110V 16A plug.
B O X C O N T E N T S
• Tripod
• LED Lamp Head(s)
• Screws
S P E C I F I C A T I O N
90lm/W
Finish: Yellow with clear diuser
LED: 36pcs / 2 x 36pcs of 2835
Working Temperature: -20°C - 50°C
Zhongfa icker free driver included
3m H07RN-F2X1.0MM2 Cable included
* Lumen output is per LED head.
Dimensions -
GLW118: L: 1740 x W: 870 x D: 60
GLW218: L: 1755 x W: 870 x D: 60
S A F E T Y W A R N I N G
• The installaon should be carried out by a qualied electrician in compliance with the current edion of the IEE Wiring Regulaons.
• Prior to installaon, carry out the necessary risk assessment considering the people who could be at risk, the level of risk and the precauons required to
control the risk
• Ensure that the circuit supply is isolated either by the circuit supply fuse being removed or the applicable circuit breaker being turned o before installaon
or any maintenance.
• Check the total load on the circuit ensuring the luminaire does not exceed the rang of the circuit cable, fuse or circuit breaker.
• If the ng incorporates control gear, ensure careful sizing to avoid instances of nuisance tripping of the protecve device used in the installaon.
• Follow the provided installaon instrucons, using the xings supplied or recommended.
50/
60Hz
LED >75 Ra
Image shown - GLW218

110V LED WORKLIGHTS WITH TRIPOD
MODELS: GLW118, GLW218
INSTALLATION INSTRUCTIONS
Red Arrow Trading Ltd
Elsworth House, Herries Road South
Sheeld, S6 1QS
Tel: [phone] Fax: [phone]
Email: [e-mail] Web: www.redarrowtrading.com
G U A R A N T E E
This product is guaranteed for a period of 3 years from the date of purchase.
The guarantee is invalid in the case of improper use, tampering, removal
of the Q.C. date label, installaon in an improper working environment
or installaon not according to the current edion of the I.E.E. Wiring
Regulaons (BS7671).
The guarantee is also invalidated if the luminaire has been Mega tested.
Should this product fail during the guarantee period it will be replaced free
of charge, subject to correct installaon and return of the faulty unit. We
do not accept responsibility for any installaon costs associated with the
replacement of this product. Your statutory rights are not aected. We
reserve the right to alter specicaons without prior noce.
M A I N T E N A N C E
• This ng will require roune cleaning if used in adverse (dust,
paint, welding, oils etc) environments.
• When this ng comes to the end of it’s life or you choose to
replace it, please do not dispose of it with your normal household
waste. Please recycle where the facilies exist, check with your
local authority or retailer for suitable opons.
I N S T A L L A T I O N I N S T R U C T I O N S
1. Remove the tripod from the box and loosen the screw at the boom to be able to open out the three legs. Once opened out, place on a at surface and
ghten the screw back up.
2. Adjust the height of the tripod by twisng the central pole. once you have the height you require, twist to ghten it back up.
3. Fix the LED head(s) on the top of the tripod by using the screw(s) provided, twist the LED head(s) to the posion you want and fully ghten the screw(s).
4. Check that the tripod is stable and has a solid foong. Ensure that the cable is not near any sharp objects that could cause damage to it and make sure the
plug is protected against rain and moisture.
5. Connect the plug to a suitable power supply and make sure it is working correctly.
6. When the tripod is not in use, use the hooks to safely store the cable.