Redgum RGCWCC User manual

Please Note
Our goods come with a guarantee that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement part for a major failure and for compensation for any
other reasonable foreseeable loss or damage. You are
entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and failure does not amount to a major failure.
3. Load the wheelchair - The easiest way to load the wheelchair
is to use the footrests to pull the wheelchair up the carrier.
Refer figure 6 . Please ensure the push wheels are centrally
located within the wheelchair carrier frame Once loaded push
the wheelchair carrier in to the locked the horizontal position.
4. Now secure the wheelchair with the straps provided as per
figure 7. Remove the legs rests and store in the vehicle.
5. To unload the wheelchair remove the straps, pull the lever as
per figure 1, tilt the wheelchair to the left and roll of the carrier.
6. To store the carrier fold as shown in figure 2, remove “R”
Clip , now holding the body of the carrier pull it towards
yourself. It can now be stored.
Specifications
Max Capacity - 32kg
Weight - 10.5kg
PATENT NUMBER - 2014100486
APPLIES TO THIS WHEELCHAIR CARRIER NO COPYING OR
MODIFICATION IS ALLOWED
REDGUM BRAND
1 BUSINESS WAY MALAGA
WESTERN AUSTRALIA 6944
0892484180
Warranty
12 months on the product - Any
warranty related issues should be direct
to the selling dealer
Maintenance
Please ensure the securing straps are routinely checked to ensure they in good
condition , replace if required. Lubricate the carrier mechanism with light oil to
ensure it remains easy to operate and locks into position.
WHEELCHAIR
CARRIER
PATENT NUMBER - 2014100486
PART NUMBER - RGCWCC

REDGUM Brand has taken all due care in compiling the
information noted within these pages however No liability
whatsoever will be accepted whether direct or indirectly from its
use due to fitting, as this is outside REDGUM Brands control.
Please read all information located within these pages and
observe all warnings to ensure your safety and that of others.
Failure to do so may result in Injury or loss of Warranty.
If you are unsure on any steps noted below please contact you
authorised selling dealer - correct fitting is essential to ensure
safe operation!
Fitting Information
 Refer to your tow bar manufacturer instructions for
information relating to tow ball weights. Do not exceed
 Remove the tow ball from the vehicle, using the part
shown in figure 1 fit to the tow ball / hitch. Ensuring the
tow ball is refitted at the highest setting as per the tow bar
manufacture instructions.
 Fit the remainder of the wheelchair carrier in to place
ensuring the “R” clip is used to secure the wheelchair
The REDGUM Brand wheelchair carrier has been designed to
provide an easy way to carry all types of folding manual wheel-
chairs on the rear of a vehicle. The wheelchair carrier is easily
fitted to the tow bar on the vehicle and once fitted the main body
can be easily removed for secure storage.
Please Note
After fitting the wheelchair carrier please be aware of the following
whether the carrier is loaded or unloaded.
 Do not obscure the vehicle warning lights
 Do not obscure the vehicles license plate
 Do not extend the vehicles overhang past acceptable limits
 Be aware of the vehicles departure / approach angles
How to Use & Operate
1. Prepare the carrier as per figure 4 Ensure you are on level
ground
2. Pull the lever as shown in figure 1 & tip the carrier to the left
as shown in figure 5. It is now ready to have the wheelchair
loaded.
REDGUM Brand has taken all due care in compiling the
information noted within these pages however No liability
whatsoever will be accepted whether direct or indirectly from its
use due to fitting, as this is outside REDGUM Brands control.
Please read all information located within these pages and
observe all warnings to ensure your safety and that of others.
Failure to do so may result in Injury or loss of Warranty.
If you are unsure on any steps noted below please contact you
authorised selling dealer - correct fitting is essential to ensure
safe operation!
Fitting Information
 Refer to your tow bar manufacturer instructions for
information relating to tow ball weights. Do not exceed
 Remove the tow ball from the vehicle, using the part
shown in figure 1 fit to the tow ball / hitch. Ensuring the
tow ball is refitted at the highest setting as per the tow bar
manufacture instructions.
 Fit the remainder of the wheelchair carrier in to place
ensuring the “R” clip is used to secure the wheelchair
The REDGUM Brand wheelchair carrier has been designed to
provide an easy way to carry all types of folding manual wheel-
chairs on the rear of a vehicle. The wheelchair carrier is easily
fitted to the tow bar on the vehicle and once fitted the main body
can be easily removed for secure storage.
Please Note
After fitting the wheelchair carrier please be aware of the following
whether the carrier is loaded or unloaded.
 Do not obscure the vehicle warning lights
 Do not obscure the vehicles license plate
 Do not extend the vehicles overhang past acceptable limits
 Be aware of the vehicles departure / approach angles
How to Use & Operate
1. Prepare the carrier as per figure 4 Ensure you are on level
ground
2. Pull the lever as shown in figure 1 & tip the carrier to the left
as shown in figure 5. It is now ready to have the wheelchair
loaded.