REDRAGON K622 Horus TKL RGB User manual

)
REDRAGON
HORUS
.
WIRED RGB MECHANICAL KEYBOARD
Mechanical Gaming Keyboard Operating Instructions

Dear user
Thank you for you choosing REDRAGON Brand, to protect your rights and for
better customer service, we ask that you note our warranty rules.
1. Within guaranty period, repair is guaranteed for failure due to electrical circuit
problems. Man-made damages, such as disassembly, hard impacts, submersion
into water, plugging into improper current or voltage, and damage caused by
natural disasters such as fire, flood, or earthquake are not included.
2. Consumable parts (such as foot stick) and spare parts replacement are no
included in our warranty.
3. Please fill out the warranty card. Warranty card is valid with the stamp of the
retailer.
4. This warranty card will not be reissued if lost. Please keep it in a safe place.

OS support
Windows XP/Vista/Win 7/Win 8/Win 10/Mac OS
1.Plug and play, no need software.
2.Keyboard interface: USB full speed
Function Introduction
1.FN+INS for 20 backlight effects.
2. Commands of key combinations with [FN] key
[FN]+[Ins]: Change backlight mode. There are 20 backlight effects.
[FN]+[Del]: Change back light color.
[FN] + [«]: Slow down the running speed of backlight .
[FN] + [—]: Add up the running speed of backlight.
[FN]+[TAB]: Turn the backlight to white.
[FN] + [Win]: Disable or enable the [Win] key.
[
[
FN] + [ESC]: Set the keyboard to default setting.
FN] +[W]: Swapping ASDW key to Arrow key
Scroll button function
1 1
Scroll button is place on right upcorner of keyboard for volume adjustment and
keyboard backlight brightness adjustment function.
Backlight brightness adjustment: Press key, it is light on White color, Scroll button
can switch in different brightness level.
Volume adjustment: Press key, the key light’s OFF , scroll button can be switch the
volume level.
2

Marco profile key (M key) on F1-F4
FN+F1=M1
FN+F2=M2
FN+F3=M3
FN+F4=M4
Multimedia function on F9-F12
FN+9 : Browser
FN+10: Research
FN+11: Calculator
FN+12: E-mail
Shortcut key function
I
o) .
(@) Previous track
=
>) Next track
"> Play /Pause
Stop
Macro recording function
There are 4 profiles keys from M1 to M4, each profile can assign with 5 macro keys from
G1 to G5, total 20 group macro recording.
1. Press FN+(F1-F4)key to set a profile group, the key lights ON.
2. Press MR key (MR key lights ON),then press G key (G1/G2/G3/G4/G5),the key lights ON.
3. Record the desired keys.
4. Press MR key to complete recording (MR key lights OFF).
For example: M1— MR — G1 — ABC— MR

How to play Macro
1. Choose the profile group by press M key from M1 to M4.
2. Press the Macro key from G1 to G5.
For example : M1— G1(ABC).
How to delete Macro
1. Choose the profile group by press M key from M1 to M4 (The key lights ON).
2. Press MR key (MR key lights ON).
3. Double press G keys from G1 to G5 (The key lights OFF).
4. Press MR key to save(MR key lights OFF).
FAQ
1. If the keyboard doesn’t respond, please check if the keyboards USB cable is correctly
inserted into the corresponding USB port on the computer, or try another USB port on
the computer.
2. If you spill liquid on the keyboard, please remove keyboards USB cable from the
computer immediately. Wipe up excess liquid and put the keyboard in a warm place
(for instance, under a lamp) to let the keyboard dry naturally before using again.
QUALITY
ASSURED

FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occurin a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions (1)this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.