REDRAGON K631 RGB CASTOR PRO User manual

Y,
REDRAGON
CASTOR ero
WIRED/2.4G/BT 68 KEYS GAMING KEYBOARD
Mechanical Gaming Keyboard
Operating Instructions

Dear user
Thank you for choosing REDRAGQN product. To protect your rights and for
better customer service, please read the following warranty rules carefully.
1. Within 18 months of purchase date, repair is guaranteed for failure due to
electrical circuit problems. Other damages, such as disassembly, hard impacts,
submersion into water, plugging into improper current or voltage, and damage
caused by natural disasters such as fire, flood, or earthquake are not included.
2. Consumable parts (such as foot pads) and spare parts replacement are not
included in our warranty.

OS Support
WinXP/Vista/Win7/Win8/Win10/Win11
How to connect the keyboard with multiple devices
Wired Connection
Slide the 2.4G/OFF/BT switch on OFF.
Take out the USB A to USB Type C cable in the package and connect the keyboard with
your computer.
The computer will recognize and configure the keyboard automatically.
Once the keyboard is connected in wired mode, the side M indicator will be Red when
the keyboard is charging and in Green when it's fully charged.
2.4G Wireless Connection
1. Slide the 2.4G/OFF/BT switch on left side of keyboard to 2.4G.
2.Press [FN] (FN1)+ [R] forabout 3 seconds the side M indicator will flashing in
Green, plug the USB receiver into any available USB port on your computer within 20
seconds. The computer will recognize and configure the keyboard automatically.
3. Under this mode, it is available with charging by USB cable plug-in, will be in Red and
turn to green after charge completed.

Bluetooth Connection
1. Slide the 2.4G/OFF/BT switch on left side of keyboard to BT.
2. Press [FN1]+[Q BT1/W BT2/E BT3]for about 3 seconds, flashes in Blue(BT1) or
Cyan(BT2)or Purple(BT3) quickly.
Turn on Bluetooth and scan for available devices on your computer or smart phone. It
will find “BT3.0Keyboard or BT5.0 KB” device. Select one of them to get connected with
it automatically.
3.To switch the bluetooth connection between BT1 /BT2/BT3, press FN1+Q/W/E.
Function Introduction
1. With standard USB and 2.4G/BT connections, the keyboard can be used on computer
without any software or driver installation.
2.There are 20 backlight effects,switch by press FN+PGUP.
3. Commands of key combinations with [FN1] key
FN+1:F1
FN+2:F2
FN+3:F3
FN+4:F4
FN+5:F5
FN+6: F6
FN+7:F7
FN+8:F8
FN+9:F9
FN+0:F10
FN+"-_":F11
FN+"=+":F12
FN+"[{":HOME
FN+"1}":END
FN+";:": PRTSC

FN+"'"": INSERT
FN+B : Pervious Track
FN+M : Next Track
FN+N : Play/Pause
FN+V : Stop
FN+C: Mute
FN+Z : Volume-
FN+X: Volume+
FN+DEL : RESET
How to recharge the keyboard
The LED indicator of baterry will turn to red when keyboard is out of battery.
Find the USB A to USB type C cable in the packaging ,plug the keyboard and connect it
with computer for charging.
Macro recording function
1. Press FN2+ (MR)7 to start recording,now 1-6 keys light up in Red, 7 key light up in
white, CAPS key light up and flash quickly in Red color indicate its ready for recording.
2. press one of kye from (G1-G6) 1-6 key, the key will light up and flash quickly in Red.
3. Record the desired keys.
4. Press FN2+ (MR)7 key to complete recording (MR key lights OFF).
For example:FN2+7- 1+ ABC— FN2+7
How to play Macro
FN2+(1-6)key
For example :FN2+1- G1(ABC)
How to delete Macro
FN2+DEL to delete all Marco

FAQ
1. If the keyboard doesn't respond, please check if the keyboards USB cable is correctly
inserted into the corresponding USB port on the computer, or try another USB port on
the computer.
2. If you spill liquid on the keyboard, please remove keyboards USB cable from the
computer immediately. Wipe up excess liquid and put the keyboard in a warm place
(for instance, under a lamp) to let the keyboard dry naturally before using again.
GO
QUALITY
ASSURED

FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions (1)this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
California Proposition 65
AWARNING: Risk of Cancer from [Name of one or more chemicals known to cause
cancer] And Reproductive Harm From [Name of one or more chemicals known to
cause reproductive toxicity] Exposure - www.P65Warnings.ca.gov
6