Redsbaby JIVE3 User manual

Getting
ready
for more
journeys.
INSTRUCTION MANUAL
JIVE3
Second Seat Conversion Kit

1II
JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL
1II
JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL
Family life is all about creating
memories that last a lifetime; and
we’re committed to celebrating life’s
beautiful moments, a philosophy that
touches everything we do. We can’t
wait to join you on your journey
and see your story unfold.
We’re with you, for the journey.

1II
JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL
1II
JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL
General instructions 2
Warranty information 2
Product Care 5
Warnings and safety precautions 6
Approved configurations 9
Non-approved configurations 10
Components 11
Assembly instructions 12
Assembling and using the main (upper) adaptors 12
Assembling and using the second (lower) seat and adaptors 13
Using the 5-Point Safety Harness 15
Using your Redsbaby JIVESecond Seat 16
Folding and unfolding the frame in tandem mode 16
Contents

32
JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL
This document contains important information and must be kept for
future reference.
Please read thoroughly before commencing assembly, and use of your
Redsbaby JIVE³ Second Seat Conversion Kit. Incorrect assembly, and use
can be dangerous and result in serious injury or even death.
There may be slight variations in the design of your product to that shown
in the images of this instruction manual.
General Instructions
Warranty information
24 Month Warranty
The Redsbaby JIVE³ Pram comes with a 24 Month Warranty to cover against
faults in materials and workmanship when your products are used under
normal conditions, according to our user manuals and technical specifications.
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement, or refund,
for a major failure and compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired, or
replaced, if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.
TIP! You can also view our Assembly and How To videos here:
www.redsbaby.com.au/videos/jive3-pram/

32
JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL
The 24 Month Warranty period starts from the date your product(s) are
dispatched from our warehouse. This includes products that are purchased
via pre-order, For a claim to be valid, it must be made within the claims period.
• Your 24 Month Warranty covers manufacturing defects relating to your
pram as listed below: Chassis, frame, wheels and adaptors;
• 5-point harness buckle, padding, strapping and assembly; and
• All soft good seams, bindings and zippers.
To the extent permitted by law, the following are not covered by warranty:
• Failure or defects resulting from improper care or use;
• Normal wear and tear including scratches to the pram frame;
• Scus and tears to leatherette handles/bumpers;
• Products purchased second hand or from an unauthorised distributor;
• Fading or discolouration of fabrics and materials due to cleaning and/or
excessive sun exposure;
• Faulty or incorrect assembly of the products by the customer;
• Installation of a part or accessory not compatible with the product and/or
not manufactured by Redsbaby;
• Any modification or alteration not conducted or authorised by Redsbaby;
• Corrosion or rust on the wheels and chassis due to extreme environmental
conditions, including high humidity, salt spray, ice or snow or due to
insucient maintenance;
• Accidental or intentional damage, abuse or neglect;
• Damage to handle bar grips or fabrics as a result of normal handling and
daily use;
• Airline/transport damage: check your Redsbaby product carefully after
it has been handled by the airline (or other transporters) and if required,
submit your claim directly to your travel insurer/airline;
• Consumer dissatisfaction with the product in terms of disliking the fit,
weight, functionality, colour or style (outside of the 30 Day Trial period);

54
JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL
• If the batch number sticker has been damaged or removed; and
• When the product has not been used for normal use and in accordance
with the manufacturer’s instructions.
For more information on our 24 Month Warranty, please read our Terms
and Conditions at www.redsbaby.com.au. Please ensure you follow the
assembly instructions, which can be found in this instruction manual.
How to make a warranty claim
Visit the Support Centre page on our website, www.redsbaby.com.au and
complete the ‘Warranty Claim’ form. Please ensure all fields are completed;
the more detailed you are with your description of the defect, the more
quickly we will be able to repair or replace your product. Once your form
has been submitted, a member of our Customer Care team will contact you
within seven (7) business days. Depending on the nature of the claim, we will
provide a replacement part/product to resolve the issue or arrange a repair
at one of our Australia-wide repair centres. If your pram is sent for repair,
please take care to repack the product in secure and stable packaging to
avoid any damage occurring in transit. We do not take responsibility of any
damage that occurs in transit to and from our pram repairer.
Repairs and replacements provided within the claims period within
Australia will be provided free of charge, including shipping costs. If you
require replacement parts to be shipped internationally within the warranty
claim period, Redsbaby will provide the parts free of charge, however
the customer is responsible for covering the cost dierence between
international shipping and local shipping, based on the original order
shipping address.
In order for your claim to be valid, you must stop using the product
immediately once you become aware of a fault or defect, and contact
Redsbaby following the process above to point out the defect.
You can also call our Customer Care team on 1300 344 964 for assistance
with your warranty claim.

54
JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL
Cleaning
Plastic and metal parts
• Sponge clean with warm water and a mild detergent and then air dry.
• Do not use any abrasive or corrosive cleaning products.
• Do not use products that contain alcohol, as they may cause stains,
discolouring and damage to the leatherette parts on your Redsbaby
JIVE³. This includes applying hand sanitiser to your hands or directly
on the product.
Fabrics
• May be cleaned by sponging lightly with warm water and a mild detergent.
Then air dry.
• For more instructions, follow the care labels on each fabric item.
Product care
IMPORTANT:
Do not use products that contain alcohol, as they may
cause erosion, stains, discolouring and damage to the
leatherette parts on your JIVE³. This includes applying
hand sanitiser to your hands or directly on the product.

76
JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL
Please read the following warnings and safety precautions thoroughly
before using your Redsbaby JIVESecond Seat Conversion Kit. After
unpacking, immediately discard any plastic wrapping and packaging
materials, as these can lead to a choking hazard.
Warnings and safety
precautions
• Follow the manufacturer’s instructions. Refer to and
follow all warnings and safety precautions provided
with your Redsbaby JIVE(sold separately) while using
the Redsbaby JIVESecond Seat Conversion Kit.
• Secure the child in the harness at all times and use the
harness at all times.
• When not in use disconnect shoulder straps from the
waist strap and/or buckle.
• Make sure children are clear of any moving parts if
you adjust the Redsbaby JIVE, otherwise they may be
injured.
GENERAL WARNINGS:

76
JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL
• The Redsbaby JIVE / METRO Buggyboard cannot
be used when the Redsbaby JIVE Second Seat is
attached and in use.
GENERAL SAFETY
PRECAUTIONS:
• The harness can form loops which may cause a
strangulation hazard. Never leave a harness connected
when not fitted to a child in the Redsbaby JIVE.
• Do not use the main (upper) seat, second (lower) seat
or bassinet with any other models of stroller.
• When using the Redsbaby JIVEwith one (1) child only,
do not use the main (upper) adaptors as it may cause
the pram/stroller to become unstable and tip over.
• Do not use the second (lower) seat when the main
(upper) seat is in the parent-facing position in the
upright or mid-upright positions.
• Only use the Redsbaby JIVEin the approved
configurations shown in this instruction manual.
• The Redsbaby JIVEcan be used for two (2) children
only when using the second seat attachment which is
sold separately. Without the second seat attachment,
the Redsbaby JIVEcan only be used for one (1) child.
• Do not use the Redsbaby JIVEon stairs, as this may
damage the frame and lead to breakage.

98
JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL
• Maximum weight for a child in the bassinet
is 9kg (19.8 lbs).
• Maximum weight for a child in the upper seat
is 20kg (44.1 lbs).
• Maximum weight for a child in the lower toddler seat
is 17kg (37.5 lbs).
• Maximum weight for items in the basket
is 12kg (26.4 lbs).
• Maximum weight for items in the back pocket
is 1kg (2.2 lbs).
MA XIMUM WEIGHT
LIMITS:

98
JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL
Upper position: Capsule
Lower position:
Second (lower) seat
Upper position: Main seat,
parent-facing, flat position
Lower position:
Second (lower) seat
Upper position:Bassinet
Lower position:
Second (lower) seat
Upper position: Main seat,
forward-facing, all positions
Lower position:
Second (lower) seat
APPROVED
CONFIGURATIONS:

1110
JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL
NON-APPROVED
CONFIGURATIONS:
Upper position: Main seat,
parent-facing, upright or
mid-upright positions
Lower position:
Second (lower) seat
Upper position: Main (upper)
seat using adaptors in any
position, capsule or bassinet
Lower position: Nothing
Upper position: Nothing
Lower position:
Second (lower) seat

1312
JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL
Assembling and using the main (upper) adaptors
Assembly instructions
When using the Redsbaby JIVE with one (1) child only,
do not use the main (upper) adaptors as it may cause
the pram/stroller to become unstable and tip over.
WARNING:
Fig 1
1. Secure the upper L and R
adaptors into the upper
position of the frame. (Fig 1)
2. Secure the bassinet (with
bassinet adaptors) or main
seat or capsule (with capsule
adaptors) into the upper
adaptors using ONLY the
approved configurations on
page 13 of this manual.

1312
JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL
Assembling and using the second (lower)
seat and adaptors
• Not recommended for a child under 6 months old.
• Do not use the second (lower) seat with any other
models of pram/stroller.
• The second (lower) seat is only approved for use with
model: Redsbaby JIVE.
• The maximum weight of a child that can be carried in
the second (lower) seat: 17kgs.
• Only use the second (lower) seat in the lower position
on the pram/stroller in the forward-facing position.
• Do not use any other accessories in the lower
position.
• Do not use the second (lower) seat when the main
(upper) seat is in the parent-facing position in the
upright or mid-upright positions.
WARNING:

1514
JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL
L R
Fig 2.1 Fig 2.2
Fig 2.3
• Your second (lower) seat comes assembled with all fabrics.
• Secure the second (lower) seat adaptors to the chassis (Fig 2.1 and
Fig 2.2) around the rear wheel axle.
• Secure the second (lower) seat into the adaptors.

1514
JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL
1. Insert the shoulder and waist
strap tabs into the buckle
individually, and click backwards
to secure. You will feel and hear
a firm ‘click’ when each strap
is secured.
2. To unlock the 5-point safety
harness, simply press the button
in the middle of the centre
buckle (C) (Fig.2.4)
3. Adjust the shoulder strap (A1)
and (A2), waist straps (B1) and
(B2) and crotch strap (D) to the
desired fit.
4. Adjust the shoulder height (A1)
and (A2) by accessing the back
of the seat and feeding the
shoulder strap tab from the
back to the front of the seat.
Place the tab at your desired
height and feed the excess tab
into the back of the seat.
Note: The shoulder straps should
sit in the position just above the
shoulders of your child.
Fig 2.4
A1
B1
A2
B2
D
C
Fig 2.5
Using the 5-Point Safety Harness
IMPORTANT:
For the safety of your child the
5-point safety harness must be
properly fitted and adjusted.

1716
JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL JIVE3SECOND SEAT CONVERSION KIT ~INSTRUCTION MANUAL
Folding and unfolding the frame in tandem mode
1. Remove the bassinet/capsule/seat and adaptors from the upper position.
2. Remove the second (lower) seat. You DO NOT need to remove the
second (lower) seat adaptors as the frame will fold with them in place.
Fold the pram.
Using your Redsbaby JIVE3
Second Seat
Other manuals for JIVE3
3
Table of contents
Other Redsbaby Baby Carrier manuals