Reebok InColor User manual

RB1400IS01SPO.indd
5/3/11; rev 6/6/11; 6/20/11
4" × 2.25" Rick W.
NY Office 4 Executive Plaza, Yonkers, NY 10701 TEL: [phone] FAX: [phone]
HK Office Units 705 & 706, Tower III, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Hong Kong Tel: [phone] Fax: .[phone]
Print Colors
Approved Product Manager
Production Checklist:
Artwork Prepared by:Date: Artwork Revised by:
Approved Designer Approved Proof Reader
6/6/11 Rick W.
model: InColor™ Pedometer
4 LCD Colors to Customize & Motivate
Featuring:
• Step & Distance Tracking
• Time in Motion
• Calories Burned
• Speed
• Pace Assist
RB1400IS01SPO.indd 1 6/28/11 9:53 AM

BUTTON FUNCTIONS pg04 ACTIVATE YOUR PEDOMETER pg05 INSTALLING THE CLIP pg06 RESETTING PEDOMETER pg07 CHANGING DISPLAY COLOR pg08 MODES pg09-15 overview pg10 steps pg11 distance pg12 pace pg13 calories pg14 activity timer pg15
SETUP entering
s
units of
m
weight height stride pace exiting se APPENDI measurin
g
target pa
c
care & m
a
warnings battery r
e
battery s
a
WARRAN
We’d like to thank you for choosing a REEBOK tness
product to guide you on your journey to improved
health and tness.
We strive to create quality products which are
functional, accurate, well designed and easy to use.
We believe everyone should have access to information
which will help them achieve their tness goals.
If you have questions, comments or need assistance
please contact Customer Support by calling
1-866-694-4575.
RB1400IS01SPO.indd 2 6/28/11 9:53 AM

INDEX
BUTTON FUNCTIONS pg04 ACTIVATE YOUR PEDOMETER pg05 INSTALLING THE CLIP pg06 RESETTING PEDOMETER pg07 CHANGING DISPLAY COLOR pg08 MODES pg09-15 overview pg10 steps pg11 distance pg12 pace pg13 calories pg14 activity timer pg15
SETUP pg16-24 entering setup pg17 units of measure pg18 weight pg19 height pg20 stride pg21 pace pg22-23 exiting setup pg24 APPENDIX pg25-31 measuring stride length pg26 target pace pg27 care & maintence pg28 warnings & cautions pg29 battery replacement pg30 battery safety info pg31 WARRANTY pg32
u
for choosing a REEBOK tness
u on your journey to improved
lth and tness.
e
quality products which are
,
well designed and easy to use.
hould have access to information
e
m achieve their tness goals.
s
, comments or need assistance
ustomer Support by calling
8
66-694-4575.
RB1400IS01SPO.indd 3 6/28/11 9:53 AM

4
PRODUCT OVERVIEW
BUTTON FUNCTIONS
A
Remove the battery tab t
o
normal power up and operati
n
MODE/RESET
increase/decrease
Purple button
activates the LED
screen when product
is ipped up while in
the belt clip.
SET/COLOR
RB1400IS01SPO.indd 4 6/28/11 9:53 AM

5
PRODUCT OVERVIEW
ACTIVATING THE PRODUCT
Remove the battery tab to initiate
normal power up and operating function.
Remove tab
increase/decrease
Purple button
activates the LED
screen when product
is ipped up while in
the belt clip.
T/COLOR
RB1400IS01SPO.indd 5 6/28/11 9:53 AM

6
PRODUCT OVERVIEW
INSTALLING THE CLIP RE
S
TIP: To properly activate the LED display when ipping up in the belt clip, the pedometer must be aligned so that the front button is in the downward 6 o’clock position and “REEBOK” is horizontal.
TIP: You must be in the “STEP” screen to zero out your previous walk data.
Installing the clip is easy. Simply tuck one edge of the pedometer
into the clip, then push the other side into place.
When the product is ipped up, it will automatically turn on.
To reset all pedometer functions to zero,
g
and press and hold the MODE butt
o
Press & HOLD
RB1400IS01SPO.indd 6 6/28/11 9:53 AM

7
PRODUCT OVERVIEW
RESET PREVIOUS WALK DATA
TIP: You must be in the “STEP” screen to zero out your previous walk data.
y
. Simply tuck one edge of the pedometer
e
n push the other side into place.

ipped up, it will automatically turn on.
To reset all pedometer functions to zero, go to the “STEP” screen
and press and hold the MODE button for 3 seconds.
Press & HOLD
RB1400IS01SPO.indd 7 6/28/11 9:53 AM

8
PRODUCT OVERVIEW
MO
D
features & fu
CHANGING DISPLAY COLOR
Simply press the COLOR/SET button on the back of the unit
to change the display color.
Press
to cycle
through
display
colors
BLUE PURPLE
GREEN
YELLOW
RB1400IS01SPO.indd 8 6/28/11 9:53 AM

9
MODES
features & functions.
R
L
OR/SET button on the back of the unit
h
ange the display color.
Press
o
cycle
h
rough
d
isplay
colors
BLUE PURPLE
GREEN
YELLOW
RB1400IS01SPO.indd 9 6/28/11 9:53 AM

10
MODES
Press the MODE button to advance through the functions
(STEPS, DISTANCE, PACE, CALORIES, TONE TIME [Activity Timer])
Press to cycle through functions
The step counter will begin counting aft
e
to eliminate false read
i
RB1400IS01SPO.indd 10 6/28/11 9:53 AM

11
MODES
MODE 1: STEPS
t
ton to advance through the functions
C
E, CALORIES, TONE TIME [Activity Timer])
Press to cycle through functions
The step counter will begin counting after 10 consecutive steps
to eliminate false readings.
RB1400IS01SPO.indd 11 6/28/11 9:53 AM

12
MODES
MODE 2: DISTANCE
Distance is measured based on a stride length calulated in the setup. Pace is calculated and updated e
v
RB1400IS01SPO.indd 12 6/28/11 9:53 AM

13
MODES
MODE 3: PACE
ed on a stride length calulated in the setup. Pace is calculated and updated every 30 seconds.
RB1400IS01SPO.indd 13 6/28/11 9:53 AM

14
MODES
Calories are calculated based on the weight you enter in the setup.
MODE 4: CALORIES
Records the total time you are actually mo
v
When you stop moving, the timer will
RB1400IS01SPO.indd 14 6/28/11 9:53 AM

15
MODES
ased on the weight you enter in the setup. Records the total time you are actually moving throughout the day.
When you stop moving, the timer will also stop counting.
MODE 5: TONE TIME
(ACTIVITY TIMER)
RB1400IS01SPO.indd 15 6/28/11 9:53 AM

16
SETUP
From the STEP screen, press and hold the
S
The screen will ash“Adj” and then “L
to indicate that you are now in
S
Press and hold
SET for 3 seconds
to enter SETUP
Tip 1: To enter the Setup Mode, you must start on the “STEP” screen (Mode 1). Tip 2: You must continue to hold the COLOR/SET button until you see the ashing “LB”.
RB1400IS01SPO.indd 16 6/28/11 9:53 AM

17
E
TUP
SETUP
STEP 1:
ENTER
SETUP
MODE
From the STEP screen, press and hold the SET button for 3 seconds.
The screen will ash“Adj” and then “LB” will be displayed
to indicate that you are now in SETUP MODE.
Press and hold
SET for 3 seconds
to enter SETUP
Tip 1: To enter the Setup Mode, you must start on the “STEP” screen (Mode 1). Tip 2: You must continue to hold the COLOR/SET button until you see the ashing “LB”.
RB1400IS01SPO.indd 17 6/28/11 9:53 AM

18
SETUP
Select your preferred units of measure:
LB=pounds/inches or KG=kilograms/centimeters
change
accept
setting
STEP 2: SELECT UNIT OF MEASURE
Be sure to go back and update
as you meet your tness
accept
setting
increase/decrease
STEP 3: ENTER WEIGHT
RB1400IS01SPO.indd 18 6/28/11 9:53 AM

19
SETUP
r preferred units of measure:
hes or KG=kilograms/centimeters
EASURE
Be sure to go back and update your weight
as you meet your tness goals.
accept
setting
increase/decrease
STEP 3: ENTER WEIGHT
RB1400IS01SPO.indd 19 6/28/11 9:53 AM

20
SETUP
Height setting creates an automatic stride length.
See following page for more details.
accept setting
increase/decrease
STEP 4: ENTER HEIGHT
Your stride length has been automatically
c
height. You can adjust it further if you wis
accept
setting
increase/decrease
See appendix for manually calculating stride length. STEP 5: ADJUST STRIDE LENGTH
RB1400IS01SPO.indd 20 6/28/11 9:53 AM