Reed Instruments R6210 User manual

Instruction
Manual
R6210
Heat Stress
WBGT Meter
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com

2
Table of Contents
Introduction ................................................................................................ 3
Product Quality........................................................................................... 3
Safety ......................................................................................................... 3
Features ..................................................................................................... 4
Includes ...................................................................................................... 4
Specications............................................................................................. 5
Instrument Description ............................................................................... 6
Display Description .................................................................................... 7
Operating Instructions...........................................................................8-12
Application Types ................................................................................ 8-10
Power ON/OFF....................................................................................... 10
Indoor/Outdoor Temperature Mode Selection ..................................10-11
Turn Alarm Function ON/OFF................................................................. 11
Setting WBGT Alarm Value .................................................................... 11
Switching the Temperature Unit of Measure .......................................... 12
Viewing Black Globe Temperature Measurements ................................ 12
Adjusting Alarm Volume ......................................................................... 12
Reset to Factory Settings ....................................................................... 12
Battery Replacement ............................................................................... 13
Applications ............................................................................................. 13
Accessories and Replacement Parts ....................................................... 13
Product Warranty ..................................................................................... 14
Product Disposal and Recycling .............................................................. 14
Product Support ...................................................................................... 14
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com

3
Introduction
Thank you for purchasing your REED R6210 Heat Stress WBGT Meter.
Please read the following instructions carefully before using your instrument.
By following the steps outlined in this manual your meter will provide
years of reliable service.
Product Quality
This product has been manufactured in an ISO9001 facility and has been
calibrated during the manufacturing process to meet the stated product
specications. If a certicate of calibration is required please contact the
nearest authorized REED distributor or authorized Service Center. Please
note an additional fee for this service will apply.
Safety
• Never attempt to repair or modify your instrument. Dismantling your
product, other than for the purpose of replacing batteries, may cause
damage that will not be covered under the manufacturer's warranty.
Servicing should only be provided by an authorized service center.
• Avoid electromagnetic interference which may cause erratic readings.
• Do not touch the black ball during a test as the results may be inaccurate.
• If the black ball is damaged or deformed, it will provide inaccurate
measurement values.
CAUTION
Please place the meter in a warm temperature and low
humidity environment for 24 hours after the meter has been
exposed to an overly humid environment.
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com

4
Features
• Measures ambient temperature, humidity, wet bulb temperature,
black globe temperature, WBGT (wet bulb global temperature)
• Black Globe Temperature (TG) monitors the effects of direct solar
radiation on an exposed surface
• IN/OUT function displays the WBGT value with or without
direct sun exposure
• Multi-line backlit LCD display simultaneously displays 3 measurements
• User selectable unit of measure (°F or °C)
• User adjustable WBGT threshold alarm (audible)
• Flexible armband and tripod mount for long-term monitoring
• Low battery indicator
Includes
• Heat Stress WBGT Meter
• Flexible Armband
• Fastener for Armband with Screws
• Keyring
• Carabiner
• Silicone Elbow for Anti-Skid
• Screw for Silicone Elbow
• Battery
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com

5
Specifications
Temperature
Measuring Ranges: Air Temperature: 32 to 122°F (0 to 50°C)
Black Globe: 32 to 176°F (0 to 80°C)
WBGT: 32 to 122°F (0 to 50°C)
Accuracy: Air Temperature: ±1.1°F (±0.6°C)
Black Globe: ±1.1°F (±0.6°C)
WBGT: ±3.6°F (±2.0°C)
Resolution: 0.1°F/°C
Humidity
Measuring Ranges: 5 to 90% RH
Accuracy (@ 25°C): 30 to 90% RH: ±5%
Rest of Range: ±7%
Resolution: 0.1% RH
General Specifications
Sampling Interval: 20 seconds
Display: LCD
WBGT Alarm: Yes (audible)
Tripod Mountable: Yes
Low Battery Indicator: Yes
Battery Life: Approx. 500 hours
Power Supply: CR2032 Battery
Product Certications: CE, RoHS
Operating Temperature: 32 to 122°F (0 to 50°C)
Operating Humidity: <80% (non-condensing)
Storage Temperature: 32 to 140°F (0 to 60°C)
Storage Humidity: <70% (non-condensing)
Maximum Operating Altitude: 6561' (2000m)
Dimensions: 4.6 x 2.4 x 1.9" (116 x 60 x 50mm)
Weight: 2.8oz (80g)
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com

6
Instrument Description
1. Black Globe Sensor
2. Globe Temperature (TG)/
UP Button
3. POWER Button
4. LCD Display
5. Temperature/Humidity Sensor
6. Audible Alarm/DOWN Button
7. Tripod Mounting Screw
8. Battery Cover
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com

7
Display Description
1. Outdoor Index Indicator
2. Indoor Index Indicator
3. Alarm Indicator
4. Air Temperature (TEMP)/
Black Globe Temperature (TG)
Measurement Values
5. Heat Stress Level Indicator
6. Humidity Measurement Value
7. WBGT Measurement Value
8. Low Battery Indicator
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com

8
Operating Instructions
Application Types
The R6210 can be mounted several ways to meet application requirements.
To wear the R6210 on your arm, assemble the kit as shown in Figure 1
and place around the arm as shown in Figure 2.
Figure 1 Figure 2
continued...
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com

9
To hang the R6210, start by attaching the silicone elbow to the meter with
the included fastening screw into the mount located on the back of the
meter as shown in Figure 3. When attached, the meter can now be
fastened to the user's waist or backpack as shown in Figure 4 and 5.
Figure 3
Figure 5Figure 4
continued...
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com

10
For Tripod applications, the meter can be mounted using the 1/4 inch
tripod mount located on the back of the meter as shown in Figure 6.
Power ON/OFF
1. Press the button to turn the meter ON or OFF.
2. When the meter is powered on, the LCD displays the previously
selected "Indoor (IN) or Outdoor (OUT)" WBGT measurement mode.
Indoor/Outdoor Temperature Mode Selection
1. When the meter is powered on, press and hold the and buttons
to enter the setup mode as indicated by "SET1".
2. Press the or button to toggle between indoor (IN) or
outdoor (OUT) temperature.
3. Press to save the selection and skip to the next parameter.
When the temperature mode is selected, the instrument automatically
calculates the measurement using the following parameters:
1. For outdoors with direct sun exposure:
WBGT = 0.7 x Temp wet bulb + 0.2 x Temp globe + 0.1 x Temp air
Figure 6
continued...
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com

11
2. For indoors or outdoors without direct sun exposure:
WBGT = 0.7 x Temp wet bulb + 0.3 x Temp globe
Note: The meter will automatically exit out of Setup mode and resume
normal operation if no key is pressed within 15 seconds.
Turn Alarm Function ON/OFF
1. Press the or button to turn the alarm function ON (Flashing )
or OFF when "SET2" appears on the LCD display.
2. Press the button to save the selection and skip to the next parameter
(SET3) or resume normal operation if alarm function is disabled.
Note: The meter will automatically exit out of Setup mode and resume
normal operation if no key is pressed within 15 seconds.
Setting WBGT Alarm Value
Note: This feature is only available if the meter's
alarm function is enabled.
1. Press the and buttons to adjust the WBGT alarm value when
"SET3" appears on the LCD display.
Note: When the alarm threshold is exceeded, the meter will beep for
15 seconds and repeatedly activate if the temperature continuously
exceeds the set value.
2. Press the button to save the selection and exit setup mode to
resume normal operation.
Note: The meter will automatically exit out of Setup mode and resume
normal operation if no key is pressed within 15 seconds.
Default Alarm Setting (Alarm Function is set to OFF)
Heat Stress Levels Temperature Baseline Default Alarm
Caution 69.8 to 77°F (21 to 25°C) Mute, LCD Caution Indicator
Extreme Caution 77 to 82.4°F
(25 to 28°C)
Beep for 4 seconds,
LCD Extreme Caution Indicator
Danger 82.4 to 87.8°F
(28°C to 31°C)
Beep for 15 seconds,
LCD Danger Indicator
Extreme Danger >87.8°F (31°C)
Beep for 3 seconds and pause for 2
seconds. Repeats for 15 seconds,
LCD Extreme Danger Indicator
continued...
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com

12
Switching the Temperature Unit of Measure
Press and hold the button while powering on the meter to switch
between °F and °C.
Viewing Black Globe Temperature Measurements
While the meter is powered on, the default display modes are WBGT
temperature, air temperature (AT) and relative humidity (RH).
1. Press the button to view the black globe temperature
(TG) measurement.
2. The meter will automatically revert back to displaying the air
temperature (AT) measurement after approximately 5 seconds.
Adjusting Alarm Volume
While the meter is powered on, press the button to adjust the alarm
volume between High ( ), Low ( ) and Mute (no icon appears on LCD).
Reset to Factory Settings
While the meter is off, press and hold the , and buttons for
approximately 5 seconds to reset to factory settings.
Note: When factory reset is complete, all calibration and user settings are
erased and restored to the original settings.
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com

13
Battery Replacement
When the low battery icon appears on the LCD, the battery needs to
be replaced.
1. Use a athead screwdriver to remove the battery cover.
2. Install (or replace) the CR2032 battery.
3. Secure the battery cover back into place using the athead screwdriver.
Applications
• Sports (leisure, organized, and professional)
• Monitor seasonal conditions to ensure safe environment at school
or daycare
• Ensuring safe work environments
Accessories and Replacement Parts
• CA-05A Soft Carrying Case
Don't see your part listed here? For a complete list of all accessories and
replacement parts visit your product page on www.REEDInstruments.com.
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com

14
Product Warranty
REED Instruments guarantees this instrument to be free of defects in
material or workmanship for a period of one (1) year from date of shipment.
During the warranty period, REED Instruments will repair or replace, at no
charge, products or parts of a product that proves to be defective because
of improper material or workmanship, under normal use and maintenance.
REED Instruments total liability is limited to repair or replacement of the
product. REED Instruments shall not be liable for damages to goods,
property, or persons due to improper use or through attempts to utilize the
instrument under conditions which exceed the designed capabilities. In
order to begin the warranty service process, please contact us by phone
at 1-877-849-2127 or by email at [email protected] to discuss
the claim and determine the appropriate steps to process the warranty.
Product Disposal and Recycling
Please follow local laws and regulations when disposing or recycling
your instrument. Your product contains electronic components and
must be disposed of separately from standard waste products.
Product Support
If you have any questions on your product, please contact your authorized
REED distributor or REED Instruments Customer Service by phone at
1-877-849-2127 or by email at [email protected].
Please visit www.REEDInstruments.com for the most
up-to-date manuals, datasheets, product guides and software.
Product specifications subject to change without notice.
All rights reserved. Any unauthorized copying or reproduction of this
manual is strictly prohibited without prior written permission from
REED Instruments.
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com

REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com

Access our
Product Catalog
TEST & MEASURE
WITH CONFIDENCE
Over 200 portable test and
measurement instruments
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com