Reedog RS1 User manual

Switch the channel by pressing the On/O (Channel) Button. This product
can train up to 2 dogs.

Please use a charger with a 5V output voltage that can always be
seen on the surface of it. If charged with a charger with an output
voltage over 5V, the Receiver will deliver a rapid warning tone and
stop charging automatically, and the Remote Transmitter will stop
charging automatically with the colorful indicator rapidly blinking
in red.

When pressing the Shock Button, the red indicator lights rapidly
flow from both ends and meet in the middle, and the Receiver will
deliver a static shock. It will cut off automatically if you press and
hold the Shock Button for 10 seconds. There is a total of 99 levels
of Shock for training which you can adjust by the Adjustment Button.

1.Press and hold the Power Button on the Receiver for 2 seconds
and the On/Off (Channel) Button to turn both of the Receiver and
the Remote Transmitter on.