aeolus UC-1701 User manual

Distributor Contacts
UC-1701
Stainless Steel Raptor Warming
& Oxygen Therapy Cage
Producer : Shanghai TOEX International Trading Co., Ltd.
Address : Floor 5, Building 6, No.675 Zhujin Road, Songjiang District, Shanghai, 201615, China
Manufacturer : Shanghai Xunyuan Industrial Co., Ltd.
Address : Building 8, No. 65 First Huandong Road, Jinshan District, Shanghai, China
KC-701 CC-1201
KA-509
User Manual

Overview Brief Introduction
Package Inspection
Package Inspection
- 1 - - 2 -
Parameters
Aeolus Stainless Steel Stainless Steel Raptor Warming & Oxygen Therapy Cage
UC-1701
features clean and health promoting environment, strong, durable acrylic front door
fixed on 8mm diameter stainless steel frame; very important facility for animals with
cardiovascular or respiratory disease.
The proven design safely, reliably, and conveniently keeps pets under the warm and
oxygen condition you prescribed.
Ventilation holes predrilled on both front door and back board eliminates worry about
pet inside.
Hygrometer installed on front door, display the humidity, and the temperature
controller displays and controls temperature in the cage accurately.
A mobile base is optional.
The manufacturer is not liable for any damage caused by a third party "Transport or
Delivery Company”.
The day the unit is delivered, an inspection of the outer packing should be made for
any damage to the packing box.
Then the unit should be unpacked carefully; all components, accessories and the table
itself should be inspected for any damage or loss.
If any damage is evident, the carrier or dealer should be notified immediately.
1. Use only as described in this manual. Use only manufacturer's recommended
attachments.
2. DO NOT use outdoors or on wet surfaces. DO NOT place the product on an uneven
or soft ground.
3. This product is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
1. Start button for Ventilation Fan
2. Temperature Controller
3. Start button for Heater
4. Hygrometer
Dimension: 882×844×1110mm(without mobile base)
882×844×1560mm(with mobile base)
Heater: 400W, AC110
5. Oxygen Port
6. Magnetic Lock
7. Ventilation Hole
①②③
④
⑤
⑥
⑦

Operation Instructions
- 4 -- 3 -
Temperature Setting
Ventilation
1. Press the Start button for Heater.
2. Press and see SP green light to start setting.
4. Press to return.
Note:
a. Default heating temperature is 38℃.
b. When no operation, the value shown is for current temperature.
Press to see set value.
c. The heating temperature cannot be set over 40℃.
3. Press to set temperature. Stop setting and the figure will stop flashing.
OUT in yellow says setting confirmed
they have been given supervision or instruction concerning use of the product by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the product.
4 .DO NOT modify, disassemble or repair.
5. Avoid using the product in dusty, vibrating and wet environment and in chemical
storage place.
Unlock and lock the door
Magnetic Latch
Pull the handle to unlock and push the door back for automatic locking.
Power on
Plug in and press the “RESET” button on the back of the plug.
Press the Start button for Ventilation Fan and the ventilation fan on the back will
start working.
Rotate the clover-shaped acrylic plate to unblock the ventilation holes on the door.

Maintenance
Warranty
Service Support
- 5 - - 6 -
If you need information or if you have a problem, please visit our website at www.aeolus-
pet.com or contact our customer care centre in your country.
FULL ONE-YEAR WARRANTY
We warrant each new Aeolus product, model UC-1701 (except acrylic door, cord and
plug), against defects in materials or workmanship for a period of one year from the date
of original purchase, and agrees to repair or replace any defective product without
charge. A purchase receipt or other proof of date of original purchase will be required
before warranty performance is rendered.
IMPORTANT: This warranty does not cover damage resulting from accident, misuse or
abuse, lack of reasonable care, the affixing of any attachment not provided with the
product or loss of parts or subjecting the product to any but the specified voltage. Parts
such as batteries are also excluded from coverage under this warranty.
WE WILL NOT PAY FOR WARRANTY SERVICE PERFORMED BY A NON-AUTHORIZED
REPAIR SERVICE AND WILL NOT REIMBURSE THE CONSUMER FOR DAMAGE
RESULTING FROM WARRANTY SERVICE PERFORMED BY A NON-AUTHORIZED
Oxygen Treatment
Put Oxygen pipe through the Oxygen Port into the cage for an oxygen therapy.
In between usages, the cage should be cleaned with a soft cloth or sponge using a mild
cleaning agent.
REPAIR SERVICE. NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL, INCIDENTAL
OR NON-CONSEQUENTIAL DAMAGES.
In order to obtain warranty service, simply go to www.aeoluspet.com or call us for assis-
tance.
IF YOU SHIP THE PRODUCT TO A SERVICE CENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original
carton.
Include details of the defect claimed, and proof of date of original purchase.
It is suggested that for your protection you return shipments of product by insured mail,
insurance prepaid. Damage occurring during shipment is not covered by this warranty.
NOTE: No other warranty, written or oral, is authorized by us. This warranty gives you
specific legal rights, and you may also have other rights that vary from state to state.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above exclusion and limitations may not apply to you.
Contact us if you cannot solve your problem with this manual.
Dallas
11307 Indian Trail, Dallas, Texas 75229, USA.
Tel: [phone]
Web: www.aeoluspet.com
Sydney
147 Dwyer Road, Leppington NSW 2179, Australia
Tel: [phone]
Singapore
150 South Bridge Road, Singapore 058727
Tel: [phone]
Shanghai
Floor 5, Building 6, No. 675 Zhujin Road, Songjiang District,Shanghai，China.
Tel: [phone]