Regency H2100 User manual

191June 2007 Regency Product Specifications Book
Wood Inserts
Wood Inserts
H2100 Hearth Heater
Minimum Fireplace Opening
Height 20” (508mm)
Width N/A
Depth N/A
Faceplate Dimensions
Standard 40-1/4” (wide) x 30” (height)
Oversize 48” (wide) x 33” (height)
Dimension Description H2100
A Adjacent Side Wall (to side) 10” (255mm)
B Mantle (to top)** 25” (635mm)
C Top Facing (to top) 14” (355mm)
D Side Facing (to side) 8-1/2” (216mm)
E Minimum Hearth Extension* 18” (455mm)
F Minimum Heath Thickness* 1-1/2” (38mm)
G Minimum Hearth Side Extension 6” (152mm)
Side and Top facing is a maximum of 1-1/2" thick.
Floor protection must be non-combustible, insulating material with an
R value of 1.1 or greater.
*If the hearth extension is flush with the floor (F) it must extend
19-1/2" in front of the body face (E).
Note: Hearth Extension Width (G) is measured from edge of fuel
door to side of hearth.
** Anon-combustible mantel may be installed at a lower height if the
framing is made of metal studs covered with a non-combustible
board.
14-3/4"
19-3/8"
28"
1-3/8"
6"Dia.
Flue
Faceplate
Fireboxheightis22-1/2"athighestpoint
H2100 Wood Insert