Reliable Empressa S550 User manual

The Empressa
S550
LED Digital Steam
Press
INSTRUCTION MANUAL
GUIDE D’UTILISATION
MANUAL DE INSTRUCCIONES

ENGLISH 01
FRANÇAIS 16
ESPAÑOL 32

01
THE EMPRESSA S550
LED DIGITAL STEAM PRESS
INSTRUCTION MANUAL
ENGLISH

02
CONGRATULATIONS
We would like to thank you and congratulate you for purchasing
the Empressa S550 digital LED steam press from Reliable
Corporation. With it’s unique digital LED technology, and large
34" x 11" pressing surface, it will allow you to obtain the benefits
of professional pressing in a compact and convenient format.
For your safety and to fully enjoy the advantages of this product,
please take a few minutes to read all the important safe-
guards and care instructions. Keep this manual handy and
review the product warranty card for your reference.

03
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
1. To protect against the risk of electric shock, do not immerse the appliance
in water.
2. Do not let the cord hang over the edge of counter.
3. Do not allow the cord to touch hot surfaces.
4. Always allow the appliance to cool for at least thirty minutes before storing.
5. Always put the appliance in a secure place on a table or counter when using.
6. Do not move the appliance without unplugging it first.
7. The appliance has very hot surfaces. Do not allow unsupervised children to
use the appliance.
8. Always disconnect the appliance from the outlet before filling with or remov-
ing water. Be careful to avoid spilling water on the appliance when filling.
9. Use distilled water in the appliance. Do not use perfumed or products con-
taining alcohol in the appliance.
10. Always disconnect the appliance when not in use.
11. Do not use the appliance if the cord gets damaged. Return the appliance or
have the cord repaired by the manufacturer, his service agent or a similarly
qualified person.
12. Do not operate the appliance if it has been dropped or damaged. Do not
disassemble the appliance. Incorrect reassembly can cause a risk of electric
shock. Send it to an authorized service center for repair.
13. Do not operate another high wattage appliance on the same circuit.
14. This appliance must be grounded. Do not alter the plug or attempt to defeat
this feature.
15. Be careful. Burns can occur from touching hot metal parts, hot water or steam.
16. This appliance is not intended for use by young children or infirm persons
unless they have been adequately supervised by a responsible person to
ensure that they can use the appliance safely.
17. Young children should be supervised to ensure that they do not play with
the appliance.

04
FOR HOUSEHOLD USE ONLY.
SAVE THESE INSTRUCTIONS IN A SAFE
PLACE FOR FUTURE REFERENCE.
FEATURES
• YournewSteamPressprovidesclean,professionalresultseverytime!
• Thepressingsurfaceisseventimeslargerthanmosthand-heldirons
• Reducesironingtimebyupto50%
• Multipledry-heatandsteamsettingsforalltypesoffabric
• Burstsettingremovesstubbornwrinkles
• Variabletemperatureselection
• Automaticshut-offsafetyfeaturewhileopenorclosedwithaudiblealert
• Over100lbsofevenpressureensuressharp,longlastingcreases
• Easy-to-useonehandoperation
• Protectsdelicatefabricslikesilk
• Non-stickpaddedironingboardcover
• Lockingchild-proofhandle
• Storesupright
IMPORTANT: When you want to dispose of the appliance, NEVER throw it in the
garbage. Instead, go to your closest recycling station or waste collection centre
for subsequent treatment. In this way, you will be contributing to looking after
the environment.

05
PART IDENTIFICATION
1. The Pressing Handle raises and lowers the pressing plate. By lowering the
Pressing Handle until it reaches the lowest point possible you automatically
obtain maximum pressure.
2. The Locking Knob will lock together the Pressing Plate and ironing board. Turn
the locking knob to the locked position to carry or store the steam press.
3. The Red Steam Burst Button on the handle grip produces a burst of steam
when pressed.
4. The Pressing plate is the temperature controlled surface that heats and
presses the fabric.
5. The Ironing Board is the padded surface that holds the fabric during pressing.
6. The Power Light (Red) is illuminated when the unit is on.
7. The Ready Light (Green) goes off when the Press has reached the selected
temperature.
8. The Steam Ready Light (yellow) goes on when the unit is ready. to produce
bursts of steam.
9. The*POWER*buttontoturnON/OFFtheappliance.
10. Press the *SELECT* button arrows to set the desired temperature for each
fabric.NOTE:Steamwillonlybeavailableonthethreehighestsettings(wool
cotton linen).
11. TheWaterTankslidesforwardandislledthroughholesinthetop.TheWater
Level can be seen through the front of the tank. Slide the tank forward for a
better view.
12. The Ironing Board Cover is removable and washable for extended use.

06
13. The pressing cushion is a fabric covered pad used for pressing gathered or
contoured areas such as sleeves, darts, and yokes.
14. A plastic water spray bottle is used for dampening fabric before pressing.
15. A water container is used for filling the water tank.
The multiple function safety features of this appliance turn off electric power to
the heater when the pressing plate has been left against the ironing board for
about 10 seconds. If the pressing plate is left in the open (up) position without
use after approximately 15 minutes, the unit will be automatically shut off. In
eithercase,torestoretheunit,youhavetopressthe*POWER*buttonagain.
Thefollowinginformationisprovidedforservicebyaqualiedelectricianonly:
Ratedvoltage: 120V~,60Hz,1350W
 220-240V,50Hz,1350W
WARNING: This appliance must be grounded. Use only the proper type outlet
when plugging in the appliance. Do not attempt to override the ground wire
feature.
STEAM PRESS OPERATION
STEP 1: PREPARATION FOR USE
Set the steam press on a sturdy work surface. Unlock the locking knob.
STEP 2: FILLING THE WATER TANK
BEFOREPLUGGINGINTHEAPPLIANCE,FILLTHEWATERTANK
a. Always make sure the appliance is unplugged before filling the tank.
b. Fillthewatertankwiththepressingplateliftedtotheraised(up)position.
Slide the water tank towards the front of the unit. It will not come completely
out so do not force it to do so. Using the water container, slowly pour the
water (distilled if available) into the water tank fill holes (C).
c. Be careful to avoid spilling water onto the steam press when filling.
d. SlidetheWaterTankbackintoitsrecessedposition.
100
200
300
400ml

07
STEP 3: TURNING ON THE POWER
a. Makesurethelockingknob(D)isintheopenpositionallowingfreemove-
ment of the pressing plate before plugging in the appliance.
b. Lift the pressing plate to the fully raised (up) position.
c. Plug the appliance into an electric outlet.
d. Pressthe*POWER*buttonandtheRedPowerlightwillshine.
STEP 4: SELECTING THE TEMPERATURE
Press the *SELECT* arrow buttons to choose the kind of fabric you wish to
press. Press to move selection to higher setting and press to move selec-
tion to lower setting.
a. Examine the garment label if unsure and look up the type on the chart.
IMPORTANT NOTE: If you cannot determine the type of fabric, begin with the
lowest setting and increase the temperature as desired until you obtain the
proper results.
100
200
300
400ml