Remington WSF5060 User manual

Battery Operated Ladyshaver
WSF5060
I www.remington.co.uk
Register online for an EXTRA year guarantee
Visit www.remington.co.uk/productregister. You must register within 28 days of purchase.

2
j
k
m
g
i
e
f
l
f

3
Thank you for buying your new Remington® product. Please read these
instructions carefully and keep them safe. Remove all packaging before use.
IMPORTANT SAFEGUARDS
• This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been supervised/instructed and
understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be done by children unless they are
older than 8 and supervised.
• Do not use this appliance near bathtubs, showers, basins or other vessels
containing water.
• Do not use attachments other than those we supply.
• Do not use the appliance if it is damaged or malfunctions.
• Do not use this product if it is not working correctly, if it has been dropped or
damaged, or dropped in water.
• This appliance is battery operated only.
• This product uses alkaline batteries. At the end of their life the batteries must be
removed from the appliance and be recycled or disposed of properly in accordance
with your state and local requirements.
• Do not put in re or mutilate your batteries when disposing as they may burst and
release toxic materials.
• Do not short circuit as it may cause burns.
• Turn o when cleaning or applying oil.
PARTS
1. Head assembly
2. Head release button
3. On/o switch
4. Hypoallergenic exing shaver foil
5. Bikini trimmer comb guard
6. Flexible trimmer
7. Battery compartment
8. Massage strip
9. Cleaning brush (not shown)

4
GETTING STARTED
Be patient when rst using your lady shaver, as with any new product, it may take a little
while to familiarise yourself with the product. Take the time to acquaint yourself with your
shaver, as we are condent you will receive years of enjoyable use and complete
satisfaction.
INSERTING BATTERIES
• Your shaver requires ‘AAA’ alkaline batteries (rst set included).
• Make sure the product is turned o.
• Rotate the battery compartment cap approximately ¼ turn anti-clockwise then pull o.
• Insert ’AAA’ alkaline batteries, so that the (+) and (-) marks on the battery face the same
mark in the battery compartment.
• Place cap back on unit using the alignment marks and rotate clockwise until the cap
snaps into place
• NOTE: Your shaver will not work if the batteries are inserted incorrectly
• NOTE: Remove the batteries if the unit is not in use for long periods.
INSTRUCTIONS FOR USE
Your lady shaver is suitable for legs, underarms and the bikini area. It can be used dry or in
the shower.
FOR REGULAR SHAVING
• Switch the shaver on.
• Hold the shaver at a right angle to your skin and move the shaver against the direction
of the hair growth.
• After shaving, turn the shaver o.
• NOTE: Before dry shaving, ensure the area is clean, dry and free from creams or oils.
TRIMMING AND SHAPING
• Attach the bikini trimmer attachment.
• Hold the shaver at a right angle to your skin and press down gently.
• Edge and shape the areas as desired.
FOR BEST SHAVING PERFORMANCE
• We recommend that you use your new shaver daily for -3 weeks to allow time to nd the
optimum shaving methods for your particular type of hair growth patterns.
CAUTION
• If your skin is easily irritated by shaving or you suer from skin allergies,you should test
a section of your arm or leg before using the shaver.

5
CARE FOR YOUR SHAVER
To ensure long lasting performance of your shaver, clean the head assembly regularly. The
easiest and the most hygienic way to clean the shaver is by rinsing the shaving head after
use with warm water.
AFTER EACH USE
• Ensure the shaver is turned o.
• Press the side release button to slip open the head assembly.
• Blow any loose debris from the foil.
• Brush or rinse any accumulated hair from the main body of the shaver, head assembly
and cutter assembly.
• Leave the head assembly open to allow the shaver to dry completely.
NOTE
• The lady shaver is suitable for use in the bath or shower.
• Do not rinse with water hotter than 70°C.
• Do not completely submerge the lady shaver in water.
• Ensure that the lady shaver is turned o when cleaning.
• Do not clean the shaving foils with the brush.
• At regular intervals, put a drop of sewing machine oil onto the foils and cutter heads.
REPLACING YOUR FOIL AND CUTTERS
• To ensure the continued highest quality performance from your shaver, we recommend
that the foil and cutter are replaced every 6 months. These can be obtained from our
nearest Remington* Service Centre.
• Signs that your foils and cutters need replacing.
• Irritation: as foils get worn, you may experience skin irritation.
• Pulling: as the cutters wear, your shave may not feel as close and you may feel the cutter
pulling your hair.
• Wear through: you may notice that the cutters have worn through the foils.
TO REPLACE THE FOIL
• Ensure the lady shaver is switched o.
• Remove the foil assembly by pressing the release buttons on either side of the head and
lifting the foil assembly upwards.
• Replace the foil assembly by aligning it with the body of the shaver then clicking it into
place.
CAUTION
• Only hold the plastic to prevent damage to the foil.
• Do not press on the foil when replacing.