Remington HC5015 User manual

Use and
Styling Guide
Models HC5010, HC5015, HC5020, HC5030
Register Your New Product Today!
By registering your new Remington®product, you will receive these important benefits:
Proof of Ownership • Product Protection • Product Registration • Special Offers
Register online at: www.RemingtonProducts.com
IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance,
basic precautions should always be
observed, including the following.
Read all instructions before using
this appliance.
DANGER
To reduce the risk of electric shock:
■ Do not reach for an appliance that
has fallen into water. Unplug it
immediately.
■ Do not use while bathing or in
the shower.
■ Do not place or drop into water
or other liquid.
■ Do not place or store this appliance
where it can fall or be pulled into a
tub or sink.
■ Always unplug this appliance from
the electrical outlet immediately
after using.
■ Unplug this appliance before
cleaning it.
■ Do not use outdoors or operate
where aerosol (spray) products are
being used, or where oxygen is
being administered.
■ Always store this appliance and
cord in a moisture-free area.
Do not store it in temperatures
exceeding 140°F (60°C).
■ Do not plug or unplug this
appliance when your hands are
wet.
■ Do not use an extension cord
or a voltage converter with this
appliance.
■ Always attach the plug to the
appliance, then to the outlet. To
disconnect, turn all controls to
OFF, then remove plug from outlet.
Detach removable power cords
from appliances for storage.
■ Do not place this appliance on any
surface while operating.
■ This appliance has a polarized plug
(one blade is wider than the other).
As a safety feature, this plug will
fit in a polarized outlet only one
way. If the plug does not fit fully
in the outlet, reverse the plug. If it
still does not fit, contact a qualified
electrician. Do not attempt to
defeat this safety feature.
■ Do not use this appliance with a
damaged or broken cutting unit,
as injury may occur. Always make
certain blades are aligned properly.
■ This clipper is designed for use
with 120 Volts AC, 60 HZ electrical
outlets. Do not connect the clipper
to a higher voltage than indicated,
as it may result in personal injury
and/or damage to the clipper.
WARNING
To reduce the risk of burns, fire,
electric shock or injury to persons:
■ This appliance is for household
use only.
■ An appliance should never be left
unattended when it’s plugged in.
■ Close supervision is necessary
when this appliance is used by,
on, or near children or persons
with special needs.
■ Use this appliance only for its
intended use as described in this
manual. Do not use attachments
not recommended by Spectrum
Brands, Inc.
■ Keep the cord away from heated
surfaces.
■ Never operate this appliance if it
has a damaged cord or plug, if it is
not working properly, if it has been
dropped or damaged, or if it has
been dropped into water. If any
of these things happen, return
the appliance to a Remington
authorized service center for
examination and repair.
■ Never drop or insert any object into
any of the appliance’s openings.
SAvE ThESE INSTRUCTIONS
Part HC5010 HC5015 HC5020 HC5030
1. Clipper Unit x x x x
2. Style Guide x x x x
3. Blade Guard x x x x
4. Light Texture Comb x
5. Heavy Texture Comb x
6. #0 (1.5 mm) Guide Comb x x x
7. #1 (3 mm) Guide Comb x x x x
8. #2 (6 mm) Guide Comb x x x x
9. #3 (9 mm) Guide Comb x x x x
10. #4 (12 mm) Guide Comb x x x x
11. #5 (16 mm) Guide Comb x x x
12. #6 (18 mm) Guide Comb x x x
13. #7 (22 mm) Guide Comb x x x
14. #8 (25 mm) Guide Comb x x
15. #9 (30 mm) Guide Comb x
16. Left Ear Taper x x x x
17. Right Ear Taper x x x x
18. Thin Hair Lifter x x x
19. T-Brush x x x x
20. Neck Brush x x x
21. Nylon Cape x x x
22. Standard Storage Case x
23. Deluxe Storage Case x x
24. Oil Bottle x x
25. Scissors x x x x
26. Barber Comb (7”) x x x
27. Sectioning Clips 2x 4x 4x
Product Features
Thank you for choosing Remington. Your clipper is designed to perform dependably
and efficiently for years helping you to maintain a range of hair styles.
HC5010 HC5020,
HC5030
1
2
HC5015
How to Use
Line Cord Safety Tips
NOTE: This appliance has a polarized
plug (one blade is wider than the
other). As a safety feature, this plug
will fit in a polarized outlet only one
way. If the plug does not fit fully in
the outlet, reverse the plug.
If it still does not fit, contact a quali-
fied electrician. Do not attempt to
defeat this safety feature.
1. To insert plug, grasp it firmly and
guide it into outlet.
2. To disconnect the appliance, grasp
the plug and remove it from outlet.
Do not pull or yank on the cord or
appliance. Do not wrap the cord
around the appliance.
Thin Hair Lifter
The Thin Hair Lifter (item 18), is perfect
for use on thin or curly hair. Additional
teeth help to pickup hairs that may lie
flat, making them difficult to cut. To
use, snap Thin Hair Lifter onto desired
guide comb then use guide comb as
normal.
Removable Blade Assembly
The HC5030 has a removable blade
assembly that allows you to brush out
and rinse the blades under water for
easy cleaning. DO NOT rinse clipper
body in water. Blades can only be
rinsed when they are detached from
clipper body.To remove, grasp blade
assembly firmly in one hand and clip-
per in the other hand, then pull apart.
Rinse blades under running water for
10-15 seconds to remove excess hair
and debris. To reattach blade, align
notch on blade assembly with receiver
on clipper body and simply snap back
into place. DO NOT RINSE CLIPPER
BODY IN WATER.
Taper Lever
The HC5020 and HC5030 include a
Taper Lever. Use the Taper Lever to
add versatility to your hair cuts by
changing the closeness of the blades
gradually. The Taper Lever has 6
length options with the fully forward
position providing the closest cut.
Moving the lever gradually backward
increases the length.
Blade Care
The life of your clippers will depend
on frequency of use, care, hair type,
and condition. The HC5015 and
HC5020 have blades that do not
require additional oiling. To maintain
the HC5010 blades in peak condi-
tion, apply oil after every three to
four haircuts. The HC5030 has a
removable blade assembly that can
be rinsed under water. It is recom-
mended to oil the blades after each
time it is rinsed.
3
4
5
6
7
8
9
10
11
12
13
15
16
17
18
19
20
21 22 23
24
25
26
27
14

a. The Remington product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned
product was used in accordance with the instruction booklet (included with the
product at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7. Please allow 4-6 weeks to receive your refund by check.
*Applies to US and Canadian customers’ returns only.
This warranty does not cover products damaged by the following:
■ Accident, misuse, abuse or alteration of the product
■ Servicing by unauthorized persons
■ Use with unauthorized accessories
■ Connecting it to incorrect current and voltage
■ Wrapping cord around appliance causing premature wear & breakage
■ Any other conditions beyond our control
No responsibility, obligation, or liability is assumed for the installation or mainte-
nance of this product.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT.
ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF
FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO FIVE YEARS FROM DATE
OF ORIGINAL PURCHASE.
How to Use Styling Guide
Before Cutting Hair
1. Make sure your hair clipper is
running smoothly, with a slight
vibration.
2. Place a cape or towel around the
neck of the person whose hair is
being trimmed or cut. (A cape is
provided with models HC5015,
HC5020, HC5030).
3. This person should be seated so
that the top of their head is at your
eye level.
5. Comb out all knots and tangles.
6. Ensure the hair is dry. Hair clippers
perform best with dry hair.
7. Hold the hair clipper in the palm of
one hand with your thumb resting
firmly on the top of the hair clipper.
This grip provides comfortable
cutting control. Although the hair
clipper may be used with the left
or right hand, using it right-handed
allows you to access the taper
lever more easily.
To Attach Guide Combs
1. Select the trimming guide that
matches the length you want
the hair to be after the cut. The
trimming guides are numbered
and marked with specific lengths.
See preceding chart to determine
which combs your model contains.
2. While the clipper is off, grasp the
clipper body in one hand and a
comb in the other. Line up the
comb teeth with the blade, then
press down on the back of the
comb. When the comb is properly
engaged you will hear a “click.”
To Remove Guide Combs
1. Pull small tab on rear of comb up
and away from clipper.
2. Replace longer guide comb with
shorter desired length. Repeat
step 1, but start at the nape of the
neck flicking the clipper away from
the head just below the previously
cut hair.
3. To cut
hair at
the top of
the head
using a
scissors,
hold
the hair
between
your
fingers
and cut a
small amount at a time. Cut from
front to back. To cut hair at the top
of the head using a guide comb,
select a desired length most likely
being longer than the sides. Cut
from front to back.
4.
Remove
the
trimming
guide and
replace
with
either
the left
or right
Giving a Comfortable,
Even Cut
Allow the clipper to cut through the
hair without moving it too quickly.
Moving the clipper too quickly may
result in discomfort or an inadequate
cut. Use short strokes when cutting,
and initially use longer guide combs
until you are comfortable with the
length of the cut.
How to Give a Haircut
1. Start at the back of the head with
a slightly longer guide comb.
Holding the clipper as shown, take
slow strokes towards the crown of
the head flicking the clipper away
from the
head when
you reach
the crown.
Repeat
technique
on each
side of the
head. When
completed,
comb the
area to
remove any loose hair and to
determine whether you need any
further cutting.
Performance Guarantee
Performance Guarantee
Limited Five-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to
faulty material or workmanship for a five-year period from the original date of
consumer purchase. This warranty does not include damage to the product
resulting from accident or misuse.
If the product should become defective within the warranty period, we will
replace it free of charge. Return your product with your name, address and day
time phone number to: Remington Returns Center, 507 Stokley Dr., P.O. Box 1,
Deforest, WI 53532. For more information call 800-736-4648 in the US or
800-268-0425 in Canada.
Performance Guarantee
Spectrum Brands, Inc. Money-Back Offer
If within 30 days after you have purchased your Remington®product, you are
not satisfied with it and would like a refund, just return it, together with the sales
receipt, to the retailer from whom it was purchased. Spectrum Brands, Inc. will
reimburse all retailers who accept such appliances within 30 days from date
of purchase. If you have any questions regarding this money-back guarantee,
please call 800-736-4648 in the U.S. or 800-268-0425 in Canada.
Remington Guarantees Satisfaction After 30 Days!
Remington Men’s Shave and Groom 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington®branded Men’s Shave and
Groom product, you are not completely satisfied and would like a refund, return
it with the original dated sales receipt directly to Remington and receive a full
refund.** For questions concerning the money-back guarantee, please call 800-
736-4648 in the US or 800-268-0425 in Canada.
**Terms and conditions apply.
Terms and Conditions
1. Refund will be in the form of a check issued in US Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington branded Men’s Shave and Groom
product:
Warranty
This warranty gives you specific legal
rights, and you may also have other
rights that vary from state to state.
Some states do not allow the exclu-
sion or limitation of incidental or con-
sequential damages, or limitations on
how long an implied warranty lasts,
so the above limitations and exclu-
sions may not apply to you.
U.S. residents: To order accessories,
contact us at 800-392-6544 in the
U.S. or 800-268-0425 in Canada,
visit us at www.RemingtonProducts.
com, or visit your local retailer.
KEEP ORIGINAL SALES RECEIPT
AS PROOF OF PURCHASE FOR
WARRANTY PURPOSES.
Questions or comments:
Call 800-736-4648 in the U.S. or
800-268-0425 in Canada. Or visit
www.RemingtonProducts.com
® Registered Trademark Spectrum
Brands, Inc. (SBI)
© 2013 SBI
Job # 2013-10-14-32
10/13 Part No. T22-31782
Spectrum Brands, Inc.
Middleton, WI 53562
Spectrum Brands Canada, Inc.
131 Saramia Crescent
Vaughan, ON L4K 4P7
Made in China
120VAC, 60Hz
ear guide. The shorter guide teeth
are designed to be toward the ear.
Move the clipper from the back of
the head to the front. This creates a
tapered effect around the ears and
back of the neck.
5. To complete the cut, inspect hair
for missed for uneven hairs. Use
a scissors to cut if necessary. To
clean up around ears and neckline,
use the clipper without a guide
comb to trim down to skin level.
Trimming Beards &
Mustaches
1. Comb your beard in the direction
it grows.
2. Determine the length you want
the beard to remain, and fit the
appropriate guide comb.
3. Start trimming under your chin and
work toward your ear and beard
line. Cut in different directions for a
uniform trim.
4. Lightly stroke the edge of your
mustache in a downward
movement.
U.S. residents: To order
accessories, contact us at
800-392-6544 in the U.S. or
800-268-0425 in Canada, visit us
at www.RemingtonProducts.com,
or visit your local retailer.