Remington HC610 User manual

Seite 2 mm kürzer
Seite 2 mm kürzer
All technical modifications reserved. 11/07.TSC 07.0777
Model No. HC610
Уважаемый покупатель! Приобретаемый вами
продукт Remington прошел необходимую
сертификацию в соответствии с требованиями
российского законодательства. Подробную
информацию о номере сертификата и сроке его
действия вы сможете найти на сайте
www.remington-products.ru
07/INT/HC610 Version 11/07 Part No. T22-25511
REMINGTON®is a Registered Trade Mark of Spectrum Brands, Inc., or one of its subsidiaries
VARTA Consumer Batteries GmbH & Co. KGaA
Alfred-Krupp-Str. 9
73479 Ellwangen
Germany
www.remington-europe.com
© 2007 SBI
7.
6.
5.
DESIGNER
HAIR CLIPPER
HC610
3.
2.
1.
4.
070777_REM_IFU_HC610_Cover.indd 1-3070777_REM_IFU_HC610_Cover.indd 1-3 11.26.2007 12:21:30 Uhr11.26.2007 12:21:30 Uhr

Seite 2 mm kürzer
Seite 2 mm kürzer
A B C D
E F G
INTERNATIONAL SERVICE CENTRE
GERMANY
BENELUX
FRANCE
ITALY
SCANDINAVIA
AUSTRIA
SWITZERLAND
PORTUGAL
Central Europe
00800 / 821 700 821
Mo.-Fr. 9 a.m. – 5 p.m. Central EuropeanTime (free call)
E-Mail: [e-mail]
www.remington-europe.com
SPAIN
MALTA Tel. [phone] (free call)
GREECE Tel. [phone] (free call)
UNITED KINGDOM Tel. [phone] (free call)
Rayovac Europe Ltd, Watermans House, Kingsbury Crescent, The Causeway,
Staines, Middlesex, TW18 3BA, UNITED KINGDOM,www.remington.co.uk
ČESKÁ REPUBLIKA Tel. [phone]
VARTA Baterie spol. s r. o., Jindřicha z Lipé 108, 470 01 Česká Lípa,
ČESKÁ REPUBLIKA, www.cz.remington-europe.com
IRELAND Tel. [phone]
Remington Consumer Products, Unit 7C, Riverview Business Park,
New Nangor Road, Dublin 22, IRELAND, www.remington.co.uk
MAGYARORSZÁG Tel. [phone]
Varta Hungária Kft., 1191 Budapest,Ady Endre út 42-44.
www.hu.remington-europe.com
POLSKA Tel. [phone]
Varta Baterie Sp. z o.o., ul. Fabryczna 5, 00-446 Warszawa, POLSKA,
Fax [phone], www.pl.remington-europe.com
РОССИЯ Тел. [phone]
ООО ПРОФСЕРВИС Россия, 109202, Москва, ул. 2я Карачаровская, 14а-3,
www.remington-europe.com
TÜRKIYE Tel. [phone]
Varta Pilleri Ticaret Ltd. Şti., İstoç 28.Ada No:1 34217, Mahmutbey/İstanbul,
TÜRKİYE, Fax [phone], www.tr.remington-europe.com
070777_REM_IFU_HC610_Cover.indd 4-6070777_REM_IFU_HC610_Cover.indd 4-6 11.26.2007 12:21:34 Uhr11.26.2007 12:21:34 Uhr

1
GB
DNL
F
TR RU
HUN
CZ PFIN SE
I
SK
PL
ROAR
ENGLISH
Thank you for choosing Remington®. Our products are designed to meet the high-
est standard of quality, functionality and design. We hope you enjoy using your
new Remington®product. Please read the instructions for use carefully and keep
in a safe place for future reference.
CAUTION
Use this appliance only for its intended use as described in this manual. Do not
use attachments not recommended by Remington®.
Do not use this product if it is not working correctly, if it has been dropped or
damaged, or dropped into water.
DESCRIPTION
1. On/Off switch
2. Adjustable comb setting
3. Length position indicator
4. Charge indicator light
5. Charging adaptor
6. Removable adjustable comb attachment
7. Hair thinner mechanism
GB
070777_REM_IFU_HC610_INT.indd 1070777_REM_IFU_HC610_INT.indd 1 11.26.2007 12:17:09 Uhr11.26.2007 12:17:09 Uhr

2
GETTING STARTED
CHARGING YOUR HAIRCLIPPER
Before using your hair clipper for the first time, charge for 14-16 hours.
Ensure the product is switched off.
Connect the charging adaptor to the product and then to the mains. The charging indica-
tor will light up.
Use product until the battery is low. This is indicated by illuminated red light.
Your clipper cannot be overcharged. However, if the product is not going to be used for an
extended period time (2-3 months), unplug it from the mains and store. Fully recharge your
hairclipper when you would like to use it again.
To preserve the life of your batteries, let them run out every six months then recharge for
14-16 hours.
CORDED USE
Connect the charging adaptor to the product and then to the mains.
CAUTION: Extended mains only use will result in the reduction of the battery life.
HOW TO USE
Before starting the cut
1. Inspect the clipper making sure that it is free from hair and dirt.
2. Seat the person so that their head is approximately at your eye level.
3. Before cutting, always comb the hair so it is tangle free and dry.
ADJUSTING THE TRIM LENGTH
The comb attachment can be adjusted to give you 7 different trim lengths simply by sliding
the comb to the desired setting. On the back of the product you will find a clip mechanism,
which enables you by gently pressing it, to move the comb up and down. The clip will click
into place as it reaches each setting, and the setting number will appear on the length
position indicator.
HAIR THINNER MECHANISM
Simply adjust the hair thinner mechanism by slide the stick at the top part of the product.
ENGLISH
070777_REM_IFU_HC610_INT.indd 2070777_REM_IFU_HC610_INT.indd 2 11.26.2007 12:17:18 Uhr11.26.2007 12:17:18 Uhr

3
GB
DNL
F
TR RU
HUN
CZ PFIN SE
I
SK
PL
ROAR
Comb Attachment Hair Lengths
Comb position Small comb Large comb
1 4 mm 23 mm
2 7 mm 26 mm
3 9 mm 28 mm
4 11 mm 30 mm
5 13 mm 32 mm
6 16 mm 35 mm
7 19 mm 38 mm
INSTRUCTIONS FOR HAIR CUTTING
Note: For even cutting, allow the comb attachment/blade to cut its way through the hair.
Do not force it through quickly. If you are cutting for the first time, start with the maxi-
mum comb length.
STEP 1 – Nape of the neck (Diagram A)
Set the comb position between 4mm and 9mm.
Hold the clipper with the blade teeth pointing upwards. Begin starting at the centre of the
head at the base of the neck.
Slowly lift the clipper, working upwards and outwards through the hair, trimming just a
little at a time.
STEP 2 – Back of the head (Diagram B)
Set the comb position at 11mm or 19mm, cut the hair at the back of the head.
STEP 3 – Side of the head (Diagram C)
Set the comb position between 4mm and 7mm, trim sideburns. Then change to the longer
setting (11 or 19mm) and continue to cut to the top of the head.
GB
070777_REM_IFU_HC610_INT.indd 3070777_REM_IFU_HC610_INT.indd 3 11.26.2007 12:17:18 Uhr11.26.2007 12:17:18 Uhr

4
STEP 4 – Top of the head (Diagram D)
Set the comb position between 19mm and 23mm, cut hair on top of the head against the
direction in which the hair normally grows.
For longer hair on top, use without comb attachment. Lift the hair on top of the head with
a small hand comb. Cut over the hand comb with the hair lifted or hold the hair between
the fingers to lift it and cut it to the desired length.
Always work from the back of the head.
STEP 5 – The finishing touches (Diagrams E, F & G)
Use the clipper without an attachment comb for close trimming around the base and sides
of the neck.
To produce a clean straight line at the sideburns, reverse the hair clipper. Place the
reversed clipper at right angles to the head, tips of the blades lightly touching the skin and
then work downwards.
CARE FOR YOUR HAIRCLIPPER
Your clipper is fitted with high quality titanium/nanosilver blades. To ensure long lasting
performance of your clipper, clean the blades and unit regularly.
AFTER EACH USE
Ensure the clipper is switched off and disconnected from the mains.
Brush the accumulated hair from the blades. Do not submerge the clipper in water.
To clean the unit, wipe with a damp cloth and dry immediately.
Note: Ensure that the clipper is turned off when cleaning.
CAUTION:
Do not use liquid cleaners on the blades or harsh or corrosive chemicals on
the blade casing. Always use a soft brush to remove the accumulated hairs.
Unplug the charge adaptor from the power outlet when fitting or removing attachments,
or while cleaning the product.
Always store this appliance and cord in a moisture-free area.
Do not wrap the cord of the charging adaptor around the appliance.
Suitable for cleaning under water.
ENGLISH
070777_REM_IFU_HC610_INT.indd 4070777_REM_IFU_HC610_INT.indd 4 11.26.2007 12:17:19 Uhr11.26.2007 12:17:19 Uhr

5
GB
DNL
F
TR RU
HUN
CZ PFIN SE
I
SK
PL
ROAR
IMPORTANT SAFETY INSTRUCTIONS
WARNING – TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE, OR
INJURY TO PERSONS:
An appliance should never be left unattended when plugged into a power outlet.
Keep the power plug and cord away from heated surfaces.
Make sure the power plug and cord do not get wet.
Do not plug or unplug the shaver with wet hands.
Do not use the product with a damaged cord. A replacement can be obtained via our
International Service Centres.
Charge, use and store the product at a temperature between 15°C and 35°C.
Only use the parts supplied with the appliance.
Keep this product out of reach of children. The use of this appliance by persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge can
give cause to hazards. Persons responsible for their safety should give explicit instructions
or supervise the use of the appliance.
PROTECT THE ENVIRONMENT
The product contains a Nickel Metal Hydride cell unit. Do not dispose the trimmer in
household waste at the end of its useful life. Disposal can take place at our service centres
or appropriate collection sites. However, if you prefer to dispose the cell unit yourself,
please follow the instructions below.
CAUTION: Do not put in fire or mutilate your battery packs as they may burst or release
toxic materials.
For further information on recycling see www.remington-europe.com
BATTERY REMOVAL
Ensure that the clipper is discharged of all power.
Remove the 4 screws from the rear moulding of the clipper.
Remove the screw from under the blanking plate. Carefully force open the two case
sections to expose the battery pack.
Remove the battery pack diagonally (bottom left to bottom right) from behind the switch
board, twist whilst pulling to break the wires.
GB
070777_REM_IFU_HC610_INT.indd 5070777_REM_IFU_HC610_INT.indd 5 11.26.2007 12:17:20 Uhr11.26.2007 12:17:20 Uhr

6
SERVICE AND WARRANTY
This product has been checked and is free of defects. We warrant this product against any
defects that are due to faulty material or workmanship for a 2 year period from the original
date of consumer purchase. If the product should become defective within the warranty
period, we will repair any such defect or elect to replace the product or any part of it
without charge provided there is proof of purchase. This does not mean an extension of the
warranty period.
In the case of a warranty simply call the REMINGTON®Service Center in your region.
This warranty is offered over and above your normal statutory rights.
The warranty shall apply in all countries in which our product was sold via an authorised
dealer.
This warranty does not include cutters which are consumable parts. Also not covered is
damage to the product by accident or misuse, abuse, alteration to the product or use inconsi-
stent with the technical and/or safety instructions required. This warranty shall not apply if
the product has been dismantled or repaired by a person not authorised by us.
ENGLISH
070777_REM_IFU_HC610_INT.indd 6070777_REM_IFU_HC610_INT.indd 6 11.26.2007 12:17:22 Uhr11.26.2007 12:17:22 Uhr

7
GB
DNL
F
TR RU
HUN
CZ PFIN SE
I
SK
PL
ROAR
Unsere Produkte wurden entwickelt, um die höchsten Ansprüche an
Qualität, Funktionalität und Design zu erfüllen. Wir wünschen Ihnen mit
Ihrem REMINGTON®Haarschneider viel Freude.
Lesen Sie die Bedienungsanleitung vor der ersten Benutzung sorgfältig durch und
bewahren Sie diese für ein späteres Nachschlagen gut auf.
ACHTUNG
Bitte verwenden Sie dieses Gerät ausschließlich für den in dieser Bedienungs-
anleitung beschriebenen Gebrauchszweck. Benutzen Sie keine Zusatzteile, die
nicht von Remington®empfohlen werden.
Verwenden Sie dieses Produkt nicht, wenn es nicht ordnungsgemäß funktio-
niert, wenn es heruntergefallen ist, beschädigt wurde oder komplett in Wasser
gefallen ist.
BESCHREIBUNG
1. Ein-/Ausschalter
2. Variable Kammeinstellung
3. Schnittlängenanzeige
4. Ladekontrollanzeige
5. Ladeadapter
6. Abnehmbarer und verstellbarer Trimmerkammaufsatz
7. Vorrichtung zum Ausdünnen des Haars
DEUTSCH
D
070777_REM_IFU_HC610_INT.indd 7070777_REM_IFU_HC610_INT.indd 7 11.26.2007 12:17:22 Uhr11.26.2007 12:17:22 Uhr

8
ERSTE SCHRITTE
LADEN IHRES HAARSCHNEIDERS
Laden Sie den Haarschneider bei erstmaliger Verwendung für 14-16 Stunden.
Stellen Sie sicher, dass der Haarschneider ausgeschaltet ist.
Verbinden Sie den Ladeadapter mit dem Haarschneider und schließen Sie ihn dann an das
Stromnetz an. Die Ladekontrollanzeige leuchtet auf.
Verwenden Sie den Haarschneider, bis der Akku leer ist. Die rote Nachladewarnanzeige
leuchtet, wenn der Akku fast leer ist.
Es besteht bei Ihrem Haarschneider keine Gefahr, dass Sie das Gerät überladen. Wenn Sie
den Haarschneider über einen längeren Zeitraum nicht benutzen (2-3 Monate), trennen Sie
ihn vom Stromnetz und verstauen Sie das Gerät. Laden Sie Ihren Haarschneider vollständig
auf, wenn Sie ihn wieder benutzen möchten.
Um die Laufzeit Ihrer Akkus zu erhalten, verwenden Sie den Haarschneider alle 6 Monate
solange, bis die Akkus vollständig entladen sind. Laden Sie den Haarschneider dann für 14-16
Stunden.
BETRIEB AM STROMNETZ
Verbinden Sie den Ladeadapter mit dem Gerät und schließen Sie ihn dann an das Strom-
netz an.
ACHTUNG: Längerer Einsatz des Gerätes im Netzbetrieb führt zu einer Verkürzung der
Akkulaufzeit.
BENUTZUNG
Bevor Sie mit dem Haareschneiden beginnen:
1. Überprüfen Sie, ob der Haarschneider frei von Haaren und Schmutz ist.
2. Der Kopf der Person, deren Haar Sie schneiden wollen, sollte ungefähr auf Ihrer Augen-
höhe sein.
3. Das Haar sollte vor dem Schneiden trocken sein und durchgekämmt werden, damit es frei
von Knoten ist.
EINSTELLEN DER SCHNITTLÄNGE
Der Kammaufsatz bietet Einstellungen für 7 verschiedene Schnittlängen. Schieben Sie den
Kamm einfach auf die gewünschte Länge. Auf der Rückseite des Geräts befindet sich ein Ein-
stellmechanismus. Wenn Sie vorsichtig darauf drücken, können Sie den Kamm nach oben und
unten bewegen. Der Aufsatz rastet bei jeder Einstellung ein und die eingestellte Haarlänge
(Zahl) erscheint auf der Längenanzeige.
VORRICHTUNG ZUM AUSDÜNNEN DES HAARS
Stellen Sie die Vorrichtung zum Ausdünnen des Haars ein, indem Sie die Taste auf der Ober-
seite des Geräts hin und her schieben.
DEUTSCH
070777_REM_IFU_HC610_INT.indd 8070777_REM_IFU_HC610_INT.indd 8 11.26.2007 12:17:31 Uhr11.26.2007 12:17:31 Uhr