Remington HighPrecision HC-600 User manual

All technical modifications reserved. 08/07.TSC 07.0774
07/INT/HC600/HC350C Version 08/07 Part No. T22-25533
REMINGTON®is a RegisteredTrade Mark of Spectrum Brands, Inc., or one of its subsidiaries
VARTA Consumer Batteries GmbH & Co. KGaA
Alfred-Krupp-Str.9
73479 Ellwangen
Germany
www.remington-europe.com
© 2007 SBI.
Model No. HC600/HC350C
Уважаемый покупатель! Приобретаемый вами
продукт Remington®прошел необходимую
сертификацию в соответствии с требованиями
российского законодательства. Подробную
информацию о номере сертификата и сроке его
действия вы сможете найти на сайте
http://www.remington-products.ru
High Precision
washable hair clipper
HC600/HC350C
2.
4.
1.
5.
3.
Seite 2 mm kürzer
Seite 2 mm kürzer
070774_REM_IFU_HC600-HC350_RC_Co1-3 1-3070774_REM_IFU_HC600-HC350_RC_Co1-3 1-3 10.31.2007 15:38:17 Uhr10.31.2007 15:38:17 Uhr

4
3
5
21
Seite 2 mm kürzer
Seite 2 mm kürzer
INTERNATIONAL SERVICE CENTRE
GERMANY
BENELUX
FRANCE
ITALY
SCANDINAVIA
AUSTRIA
SWITZERLAND
PORTUGAL
Central Europe
00800 / 821 700 821
Mo.-Fr. 9 a.m. – 5 p.m. Central European Time (free call)
E-Mail: [e-mail]
www.remington-europe.com
SPAIN
MALTA Tel. [phone] (free call)
GREECE Tel. [phone] (free call)
UNITED KINGDOM Tel. [phone] (free call)
Rayovac Europe Ltd, Watermans House, Kingsbury Crescent, The Causeway,
Staines, Middlesex, TW18 3BA, UNITED KINGDOM,www.remington.co.uk
ČESKÁ REPUBLIKA Tel. [phone]
VARTA Baterie spol. s r. o., Jindřicha z Lipé 108, 470 01 Česká Lípa,
ČESKÁ REPUBLIKA, www.cz.remington-europe.com
IRELAND Tel. [phone]
Remington Consumer Products, Unit 7C, Riverview Business Park,
New Nangor Road, Dublin 22, IRELAND, www.remington.co.uk
MAGYARORSZÁG Tel.[phone]
Varta Hungária Kft., Budapest, Ady Endre út 42-44, 1191 HUNGARY,
Fax: [phone], www.hu.remington-europe.com
POLSKA Tel. [phone]
Varta Baterie Sp. z o.o., ul. Fabryczna 5, 00-446 Warszawa, POLSKA,
Fax [phone], www.pl.remington-europe.com
РОССИЯ Тел. [phone]
ООО ПРОФСЕРВИС Россия, 109202, Москва, ул. 2я Карачаровская, 14а-3,
www.remington-europe.com
TÜRKIYE Tel. [phone]
Varta Pilleri Ticaret Ltd. Şti., İstoç 28.Ada No:1 34217, Mahmutbey/İstanbul,
TÜRKİYE, Fax [phone], www.tr.remington-europe.com
070774_REM_IFU_HC600-HC350_RC_Co4-6 4-6070774_REM_IFU_HC600-HC350_RC_Co4-6 4-6 10.31.2007 15:38:18 Uhr10.31.2007 15:38:18 Uhr

1
GB
DNL
F
TR RU
HUN
CZ PFIN SE
I
SK
PL
ROAR
Thank you for choosing Remington®. Our products are designed to meet the
highest standard of quality, functionality and design. We hope you enjoy using
your new Remington®product.
Please read the instructions for use carefully and keep in a safe place for future
reference.
CAUTION
Use this appliance only for its intended use as described in this manual. Do not
use attachments not recommended by Remington®.
Do not use this product if it is not working correctly, if it has been dropped or
damaged, or dropped into water.
DESCRIPTION
1. On/Off switch
2. Blade set
3. 8 attachment guide combs
4. Charge indicator light
5. Charging adaptor
GB
ENGLISH
070774_REM_IFU_HC350_RC_innen.in1 1070774_REM_IFU_HC350_RC_innen.in1 1 10.31.2007 15:33:45 Uhr10.31.2007 15:33:45 Uhr

2
GETTING STARTED
CHARGING YOUR HAIRCLIPPER
Before using your hair clipper for the first time, charge for 14-16 hours.
Ensure the product is switched off.
Connect the charging adaptor to the product and then to the mains. The charging
indicator will light up.
Your clipper cannot be overcharged. However, if the product is not going to be used for an
extended period time (2-3 months), unplug it from the mains and store. Fully recharge your
hairclipper when you would like to use it again.
To preserve the life of your batteries, let them run out every six months then recharge for
14-16 hours.
CORDED USE
Connect the charging adaptor to the product and then to the mains.
CAUTION: Extended mains only use will result in the reduction of the battery life.
HOW TO USE
Before starting the cut
Inspect the clipper making sure that it is free from hair and dirt.
Seat the person so that their head is approximately at your eye level.
Before cutting, always comb the hair so it is tangle free and dry.
To attach a comb
Hold the comb with its teeth upward.
Slide it onto and along the clipper blade until the front of the comb firmly sits against the
clipper blade.
To remove the comb
Holding the clipper with the blades facing away from you, firmly push the comb upward
and away from the blades.
ENGLISH
070774_REM_IFU_HC350_RC_innen.in2 2070774_REM_IFU_HC350_RC_innen.in2 2 10.31.2007 15:33:46 Uhr10.31.2007 15:33:46 Uhr

3
GB
DNL
F
TR RU
HUN
CZ PFIN SE
I
SK
PL
ROAR
Each comb attachment is marked accordingly on its outside middle surface surface
(3mm, 7mm, 9mm, 12mm, 18mm, 25mm, left and right ear guide).
Replacement combs available. Model: SP254.
INSTRUCTIONS FOR HAIR CUTTING
Note: For even cutting, allow the comb attachment/blade to cut its way through the hair.
Do not force it through quickly. If you are cutting for the first time, start with the
maximum comb attachment
STEP 1 – Nape of the neck – DIAGRAM 1
Use 3mm or 6mm guide comb.
Hold the clipper with the blade teeth pointing upwards. Begin starting at the centre of the
head at the base of the neck.
Slowly lift the clipper, working upwards and outwards through the hair, trimming just a
little at a time.
STEP 2 – Back of the head – DIAGRAM 2
With the 12mm or 18mm guide comb attached, cut the hair at the back of the head.
STEP 3 – Side of the head – DIAGRAM 3
With the 3mm or 6mm guide comb attached, trim sideburns. Then change to the longer
9mm guide comb and continue to cut the top of the head.
STEP 4 – Top of the head – DIAGRAM 4
With the 18mm or 25mm guide comb attached, cut hair on top of the head against the
direction in which the hair normally grows.
For longer hair on top, use without a guide comb. Lift the hair on top of the head with a
small hand comb. Cut over the hand comb with the hair lifted or hold the hair between
the fingers to lift it and cut it to the desired length.
Always work from the back of the head.
STEP 5 – The finishing touches – DIAGRAM 5
Use the clipper without an attachment comb for close trimming around the base and sides
of the neck. Use the ear comb guides to get a clean line around each ear. For the required
ear comb guide, angle the clipper and lightly stroke around each ear to the back of the
neck.
To produce a clean straight line at the sideburns, reverse the hair clipper. Place the
reversed clipper at right angles to the head, tips of the blades lightly touching the skin and
then work downwards.
GB
070774_REM_IFU_HC350_RC_innen.in3 3070774_REM_IFU_HC350_RC_innen.in3 3 10.31.2007 15:33:46 Uhr10.31.2007 15:33:46 Uhr

4
CARE FOR YOUR HAIRCLIPPER
Your clipper is fitted with high quality titanium blades. To ensure long lasting performance
of your clipper, clean the blades and unit regularly. The easiest and the most hygienic way
to clean the clipper is by rinsing the trimmer blade after use with warm water. Always keep
the protective cap on the trimmer blade and lubricate the clipper lightly before and after
cleaning.
AFTER EACH USE
Ensure the clipper is switched off and disconnected from the mains.
Brush or rinse the accumulated hair from the blades. Do not submerge the clipper in
water.
Place one or two drops of oil on the blades. Turn the clipper on to distribute the oil
evenly, wipe off any excess oil. Excess oil will cause damage to your product.
To clean the unit, wipe with a damp cloth and dry immediately.
Note: Ensure that the clipper is turned off when cleaning or applying oil.
EVERY SIX MONTHS
At regular intervals the blade set should be removed and cleaned.
Remove the 2 screws retaining the fixed blade with a screwdriver. Do not remove blade
set.
Brush out hairs from between the blades with soft cleaning brush. Do not remove the
lubricating grease from the blades. It is not necessary to remove the small moving blade
from the unit.
If the moving blade has been removed this can be re-fitted by slotting the long grooved
edge of the blade onto the two white plastic guide ridges and then seating the blade over
the plastic actuator bar. The fixed blade is fitted with the raised profile pointing outwards
and fixed with the 2 screws.
Before fully tightening the 2 screws, adjust the taper lever to the lower position and align
the blades so that their cutting edges are parallel to one another. Tighten the 2 screws.
Note that if the blades are not correctly aligned then cutting efficiency will be impaired.
Place a few drops of cutter or sewing machine oil onto the blades. Wipe off excess oil.
ENGLISH
070774_REM_IFU_HC350_RC_innen.in4 4070774_REM_IFU_HC350_RC_innen.in4 4 10.31.2007 15:33:47 Uhr10.31.2007 15:33:47 Uhr

5
GB
DNL
F
TR RU
HUN
CZ PFIN SE
I
SK
PL
ROAR
CLEANING CAUTIONS
Cleaning should only be done with a soft brush, such as the brush supplied with the
product.
Only use the light-grade oil supplied or sewing machine oil on the blades.
Do not use harsh or corrosive cleaners on the units or their blades.
Do not submerge in water as damage will occur.
Do not wrap the cord of the charging adaptor around the appliance.
STORAGE: Always store this appliance and cord in a moisture-free area.
Do not store it in temperatures exceeding 140°F (60°C).
Suitable for cleaning under water.
IMPORTANT SAFETY INSTRUCTIONS
WARNING – TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE,
OR INJURY TO PERSONS:
An appliance should never be left unattended when plugged into a power outlet.
WARNING: Detach the hand-held part from the supply cord before cleaning it in water.
WARNING: The parts that have to be fixed must be installed so they cannot fall into
water.
Keep the power plug and cord away from heated surfaces.
Make sure the power plug and cord do not get wet.
Do not unplug the product with wet hands.
Do not use the product with a damaged cord. A replacement can be obtained via our
International Service Centres.
Charge, use and store the product at a temperature between 15°C and 35°C.
Always unplug from the mains when cleaning or when being used under running water.
Only use the parts supplied with the appliance.
Keep this product out of reach of children. The use of this appliance by persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge can
give cause to hazards. Persons responsible for their safety should give explicit instructions
or supervise the use of the appliance.
GB
070774_REM_IFU_HC350_RC_innen.in5 5070774_REM_IFU_HC350_RC_innen.in5 5 10.31.2007 15:33:48 Uhr10.31.2007 15:33:48 Uhr

6
PROTECT THE ENVIRONMENT
The product contains a Nickel-Metal Hydride cell unit. Do not dispose the trimmer in
household waste at the end of its useful life. Disposal can take place at our service centres
or appropriate collection sites.
CAUTION: Do not put in fire or mutilate your battery packs as they may burst or release
toxic materials.
For further information on recycling see www.remington-europe.com
This product is not suitable for use in bath or shower.
SERVICE & WARRANTY
This product has been checked and is free of defects. We warrant this product against any
defects that are due to faulty material or workmanship for a 2 year period from the original
date of consumer purchase. If the product should become defective within the warranty
period, we will repair any such defect or elect to replace the product or any part of it
without charge provided there is proof of purchase. This does not mean an extension of the
warranty period.
In the case of a warranty simply call the REMINGTON®Service Center in your region.
This warranty is offered over and above your normal statutory rights.
The warranty shall apply in all countries in which our product was sold via an authorised
dealer.
This warranty does not include cutters which are consumable parts. Also not covered is
damage to the product by accident or misuse, abuse, alteration to the product or use
inconsistent with the technical and/or safety instructions required. This warranty shall not
apply if the product has been dismantled or repaired by a person not authorised by us.
ENGLISH
070774_REM_IFU_HC350_RC_innen.in6 6070774_REM_IFU_HC350_RC_innen.in6 6 10.31.2007 15:33:49 Uhr10.31.2007 15:33:49 Uhr

7
GB
DNL
F
TR RU
HUN
CZ PFIN SE
I
SK
PL
ROAR
Unsere Produkte wurden entwickelt, um die höchsten Ansprüche an Qualität,
Funktionalität und Design zu erfüllen. Wir wünschen Ihnen mit Ihrem
REMINGTON®Haarschneider viel Freude.
Lesen Sie die Bedienungsanleitung vor der ersten Benutzung sorgfältig durch und
bewahren Sie diese für ein späteres Nachschlagen gut auf.
ACHTUNG
Bitte verwenden Sie dieses Gerät ausschließlich für den in dieser Bedienungs-
anleitung beschriebenen Gebrauchszweck. Benutzen Sie keine Zusatzteile, die
nicht von Remington®empfohlen werden.
Verwenden Sie dieses Produkt nicht, wenn es nicht ordnungsgemäß funktioniert,
wenn es heruntergefallen ist, beschädigt wurde oder komplett in Wasser
gefallen ist.
BESCHREIBUNG
1. Ein-/Ausschalter
2. Klingeneinheit
3. 8 Kammaufsätze
4. Ladekontrollanzeige
5. Ladeadapter
D
DEUTSCH
070774_REM_IFU_HC350_RC_innen.in7 7070774_REM_IFU_HC350_RC_innen.in7 7 10.31.2007 15:33:50 Uhr10.31.2007 15:33:50 Uhr

8
ERSTE SCHRITTE
LADEN IHRES HAARSCHNEIDERS
Laden Sie den Haarschneider bei erstmaliger Verwendung für 14-16 Stunden.
Stellen Sie sicher, dass der Haarschneider ausgeschaltet ist.
Verbinden Sie den Ladeadapter mit dem Haarschneider und schließen Sie ihn dann an das
Stromnetz an. Die Ladekontrollanzeige leuchtet auf.
Es besteht bei Ihrem Haarschneider keine Gefahr, dass Sie das Gerät überladen. Wenn Sie
den Haarschneider über einen längeren Zeitraum nicht benutzen (2-3 Monate), trennen Sie
ihn vom Stromnetz und verstauen Sie das Gerät. Laden Sie Ihren Haarschneider vollständig
auf, wenn Sie ihn wieder benutzen möchten.
Um die Laufzeit Ihrer Akkus zu erhalten, verwenden Sie den Haarschneider alle 6 Monate
solange, bis die Akkus vollständig entladen sind. Laden Sie den Haarschneider dann für 14-16
Stunden.
BETRIEB AM STROMNETZ
Verbinden Sie den Ladeadapter mit dem Gerät und schließen Sie ihn dann an das
Stromnetz an.
ACHTUNG: Längerer Einsatz des Gerätes im Netzbetrieb führt zu einer Verkürzung der
Akkulaufzeit.
BENUTZUNG
Bevor Sie mit dem Haareschneiden beginnen
Überprüfen Sie, ob der Haarschneider frei von Haaren und Schmutz ist.
Der Kopf der Person, deren Haar Sie schneiden wollen, sollte ungefähr auf Ihrer
Augenhöhe sein.
Das Haar sollte vor dem Schneiden trocken sein und durchgekämmt werden, damit es frei
von Knoten ist.
Aufsetzen eines Kammaufsatzes
Halten Sie den Kammaufsatz so, dass die Zähne nach oben zeigen.
Schieben Sie den Kammaufsatz von oben auf das Gerät, bis er fest darauf sitzt.
Abnehmen des Kammaufsatzes
Halten Sie den Haarschneider mit abgewandter Schneideinheit, schieben Sie den Kamm
kräftig nach oben und weg von der Schneideinheit.
DEUTSCH
070774_REM_IFU_HC350_RC_innen.in8 8070774_REM_IFU_HC350_RC_innen.in8 8 10.31.2007 15:33:51 Uhr10.31.2007 15:33:51 Uhr