Reolink RLC-842A User manual

RLC-842A
RLC-842A is equipped with person/vehicle detection and pet detection (beta)
technology, and it can smartly discern the shapes of people, vehicles, and pets.
Trivial objects’ movements will be ignored so as to reduce false alarms. You can
always get accurate alerts about important events.
1. Specs
1
Metal Aluminum Case
2
IR LEDs
3
High Definition Lens
4
Daylight Sensor

2. Setup and Install
Set up the Camera
What’s in the Box
Note: The package content may vary and update with different version and
platforms, please take the below information only for a reference. And the actual
package content are subject to the latest information on the product selling page.
RLC-842A
1
Power
2
Reset Button
3
Network
4
Waterproof Lid
Surveillance Sticker*1
RLC-842A*1
Quick Start Guide*1
1m Network Cable*1

Set up the Camera on the App
Here is a guide on how to initially set up the camera via Reolink App.
Step 1. Tap the icon in the top right corner.
Note: If you've enabled the Add Device Automatically option on the App's
Settings page, you can tap this device on the Devices page and turn to Step
3directly.
Step 2. Scan the QR code on the back of the camera. You may tap Light to enable
a flashlight when setting up the camera in a dark environment.
If the phone doesn't respond, please tap Input UID/IP and then manually type in
the UID (16-digit characters under the QR code of the camera). Then tap Next.
Pack of Screws*1
Mounting Template *1
Waterproof Lid *1

Step 3. Create a login password for your camera. Then tap Next.
Step 4. Name your camera. Then tap Next.

Step 5. Initialization finished! You can start live viewing now.
Install the Camera
Please follow the steps below to install the camera.

Step 1. Put the mounting template on the ceiling and drill holes at the indicated
locations.
Step 2. Screw the dome cover off with the mounting wrench.
Step 3. Screw the camera to the ceiling.

Step 4. Loosen the two screws on both sides of the camera and
adjust the camera viewing angle.
Step 5. Tighten the screws and screw the cover back to the camera.
Done! You've successfully mounted the camera.