Reolink E1 Zoom User manual

E1 Zoom
Reolink E1 Zoom is also doing well at night, with 10pcs IR LEDs to cover up to 40ft
in low-light conditions. It catches a glimpse of your house in Super HD. Or zoom in
to see the details of what you care, without image impairment.
1. Specs
1
Daylight Sensor
2
10 IR LEDs
3
Lens
4
Status LED
5
Built-in Mic
6
Reset Button
7
Micro SD Card Slot

Status Light
Status Light
Camera Status
Solid Blue
Camera is starting up/
WiFi connection succeeded
Blinking Blue
WiFi is not configured/
WiFi connection failed
2. Setup and Install
Set up the Camera
What’s in the Box
Note: The package content may vary and update with different version and
platforms, please take the below information only for a reference. And the actual
package content are subject to the latest information on the product selling page.
E1 Zoom
1
Speaker
2
Power

Set up the Camera on the App
You may follow the steps below to set up the camera.
Step 1. Tap the icon in the top right corner to start the initial setup.
Step 2. Scan the QR code on the back of the camera. You could also tap Input
UID/IP and enter the UID (16-digit characters under the QR code of the
camera). Then tap Next.
Mounting Template *1
Surveillance Sticker*1
Pack of Screws*1
Reset Needle*1
E1 Zoom *1
Quick Start Guide*1
Mounting Plate *1
Power Adapter*1

Step 3. Tap Wi-Fi Not Configured. Make sure your camera stays powered on
and tap Next.
Step 4. If you hear the voice prompts as shown in the picture or a
repeated ding sound, tick correspondingly and tap Next.

Step 5. Enter the WiFi password of the selected WiFi network and tap Next.
Note: E1 Zoom support a 2.4 GHz or 5GHz WiFi network of your choice.
Step 6. Tap Scan Now. Place the QR code on your phone in front of the
camera’s lens at a distance of about 20 cm (8 inches) and let the camera scan
the QR code.
After hearing a beep sound, tick correspondingly and tap Next.

Step 7. Wait around 60 seconds for the camera to connect to the router. If you
hear "connection to the router succeeded", tick correspondingly and tap Next.
Note: If you heard the voice prompt "Connection to the router failed", please
make sure you've entered the WiFi information correctly in the previous step.
Step 8. Create the password for your camera. Then tap Next.

Step 9. Name your camera. Then tap Next.
Step 10. Initialization finished. You can start using your camera now.

Install the Camera
Here is a guide on how to install the camera to the ceiling.
Step 1. Install the Mounting Plate.
Drilling two screw holes on the wall according to the mounting hole template.
Insert the two plastic anchors into the holes in the wall.
Secure the base unit in place by tightening the screws into the plastic anchors.

Step 2. Attach the Camera.
Align the camera with the bracket, then turn the camera unit clockwise to lock it in
position.
Notes:
To remove it from the ceiling, turn the camera counterclockwise.

In case your camera is mounted upside down, its picture shall be rotated as
well. Please go to Device Settings >Display on Reolink App/Client and
click Flip Vertical to adjust the image.