Repose Double Mattress Overlay User manual

GP0084_B95_03
Frontier Therapeutics Limited
Newbridge Road Industrial Estate
Blackwood, South Wales NP12 2YN
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.frontiermedical.eu
REPOSE WORLD WIDE PATENT PENDING
FLAME RETARDANT - COMPLIES WITH BS7175 AND
BS7177 IGNITABILITY SOURCE CRIB 5
CLEANING INSTRUCTIONS
REPOSE CAN BE CLEANED AND REUSED
REPOSE CAN BE CLEANED WITH SOAP OR DETERGENT
AND WATER AND CAN BE DISINFECTED IN ACCORDANCE
WITH LOCAL INFECTION CONTROL POLICY FOR
STANDARD MATTRESSES.
ALCOHOL & PHENOL BASED DISINFECTANTS SHOULD
NOT BE USED ALLOW TO DRY BEFORE USE OR STORAGE.
REPOSE IS SUPPLIED WITH A MANUFACTURERS
WARRANTY FOR 12 MONTHS FROM DATE OF DISPATCH
FOR FURTHER INFORMATION VISIT
www.reposedirect.com
Repose
Repose Double Mattress Overlay
User Instructions
Repose® Double Mattress
Overlay
Order Code: 6131100
An eective aid in the prevention
and treatment of pressure ulcers
Repose
1x Repose Double Mattress Overlay & Pump
Product Size: L 1780mm x W 1350mm
REORDER CODES
Repose Double Mattress Overlay
Double Mattress
Overlay
IMPORTANT NOTICE
CHECK PRODUCT DAILY TO ENSURE CORRECT INFLATION
LEVEL IN CASE OF DOUBT, REPEAT PUMPING
PROCEDURES WITH THE PATIENT OFF THE PRODUCT

ONLY TO BE USED WITH DOUBLE MATTRESS NOT TO BE USED
AS A SLING OR A FLOTATION DEVICE.
MAXIMUM USER WEIGHT 139KG (22 STONE)PER AIR CELL
Remove the Repose Double Mattress overlay and pump from the
box.
Connect the valve on the pump to the valve on the rst air cell -
Push to t (See g. 1).
Inate the rst cell until you hear air exhausting from the pump
valve. Discontinue pumping and wait until you no longer hear air
escaping (See g. 2).
Disconnect from pump. Cover the valve on the rst cell using the
solid end of the valve cap (See g. 3).
Then repeat the process on the second air cell.
Turn over with both valves underside and away from user.
8
6
AIR
AIR
2
13
Fitting Instructions
Ensure that the Repose Double Mattress is positioned correctly
with both valves facing away from the user before securing.
Secure the xing straps around the double mattress, looping
around the bed mattress (See g. 4).
4
•
•
IMPORTANT NOTICE
REPOSE DOUBLE MATTRESS OVERLAY CAN BE CLEANED
AND REUSED. REPLACE IF PRODUCT IS DAMAGED OR
THREADBARE.
CHECK PRODUCT REGULARLY TO ENSURE CORRECT
INFLATION LEVEL. IN CASE OF DOUBT, REPEAT PUMPING
PROCEDURE WITH THE USER OFF THE PRODUCT.
KEEP AWAY FROM SOURCES OF DIRECT HEAT (INCLUDING
CIGARETTES), AND SHARP OBJECTS (ESPECIALLY PETS’
CLAWS)THAT MAY CAUSE A PUNCTURE.
POSITION ON THE DOUBLE BED SHOULD BE CHECKED
REGULARLY TO ENSURE THE CORRECT AND SAFE USE.
FOR FURTHER INSTRUCTIONS AND INFORMATION, SEE PUMP.
IF DETERIORATION IN SKIN CONDITION IS NOTED, CLINICAL
ADVICE SHOULD BE SOUGHT AND IF SO ADVISED,
DISCONTINUE USE OF PRODUCT.
WHEN DEFLATED KEEP AWAY FROM BABIES AND SMALL
CHILDREN.
To Inate
•
•
•
•
•
•
To Deate
Insert the open end of the valve cap into both the double mattres
overlay valves. Air can now escape (See g. 5).
Fold the mattress in half, then in half again. Roll up the mattress
starting at the point furthest away from the valves until all air is
expelled. (See g. 6-8).
Replace the double mattress overlay into the box with the pump.
•
•
•
Repose
LIMITATIONS FOR USE
Quick Start Guide
Inate the rst Air Cell
Inate the second Air Cell
Secure Repose Double Mattress Overlay
to a double bed.
1
2
3
5
Air
Cell 1
Air
Cell 2
Double Mattress Overlay
7
Valve
Position
Valve
Position