Resolution Products RE224GH User manual

RE224GH GE-to-Honeywell Translator.doc
Page 1 of 4 1/8/2010
www.ResolutionProducts.co
Wireless
Security
Solutions
RE224GH GE-to-Honeywell Wireless Translator
Features
•Listens to GE protocol wireless devices: DWS, PIR, Fob, Panic.
•Trans its Honeywell protocol wireless.
•No sensor enroll ent required.
•All alar , supervisory and trouble signals are passed through.
•Main device has its own unique ID for supervisories, co plete reporting
of ain device ta per, external power supply fault and low battery.
•Dual antennas for both Receive and Trans it diversity for reliable range.
•Back-up battery protects during loss of external power.
Key Instructions
•External supply: 9-18V AC or DC, reco end 30+ A.
•3 AAA Alkaline batteries are for backup in case of external supply
failure.
•Enrolling:
Main device ay be learned into the panel by tripping the
ta per. Main device does not need to be enrolled in the
panel for the repeating function to work.
GE sensors ay be enrolled into Honeywell syste using
the tripping enroll ent ode. They are not enrolled in the
Translator.
Operation
•Translator hears existing GE protocol sensors and repeats infor ation in
Honeywell protocol to control panel. Generally, sensors send 8 identical
“packets” of infor ation. The Translator ensures that a co plete set of
8 packets are repeated to the control panel.
•Translator Main Zone wireless trans ission ( unique ID):
Ta per, when cover opened OR loss of AC. Also sends restore.
Low battery, when low or re oved batteries. Also sends restore.
Supervisory sent every hour.
We ay want to have known
IDs that they can plug into the
panel.

RE224GH GE-to-Honeywell Translator.doc
Page 2 of 4 1/8/2010
www.ResolutionProducts.co
•LED Operation
Green LED
•On if AC power present.
•Blinks on receipt of GE-co patible packets.
Red LED
•On if device low battery (unless there’s no AC
power).
•Blinks on trans it of Honeywell-co patible packets.
•Application Diagra
Because the Translator has two antennas, for both receive
and trans it diversity, it will generally have better range
than all sensors, and any panels (particularly those with
internal antennas).
Place the Translator generally in the center of the all the
existing sensors it needs to hear. It will have no proble
reaching the control panel.
New
Honeywell
System
New
Honeywell
Wireless
Sensors
E isting GE
Wireless
Sensors

RE224GH GE-to-Honeywell Translator.doc
Page 3 of 4 1/8/2010
www.ResolutionProducts.co
Specifications
GE Device Types: Hears and translates DWS, PIR, Fob, Panic.
Backup batteries: Three AAA Alkaline.
External supply: 9-18V AC or DC, uses 15 A no inally.
AC Fail Conditions: AC gone. Restores on AC restore.
Device Low Battery: Low battery detected within 30 seconds.
Restores on device ta per OR on AC restore.
Back-up Battery Life on AC Fail: 72 hours.
Housing di ensions: 4x6x1 inches
Specifications subject to change without notice.
Internal Picture
Power Ter inals
Ta per
Switch
& spring
Unused:
Device Type Indicator LEDs
and Enroll ent button
Battery bucket for 3 AAA
alkalines
Indicator LEDs & buzzer
2 Antennas for:
Dual Diversity Receive and
Dual Diversity Trans it
Note: Antennas ounted
on outer ter inals

RE224GH GE-to-Honeywell Translator.doc
Page 4 of 4 1/8/2010
www.ResolutionProducts.co
Notices
“GE”, “Honeywell”, and “DSC” are trade arks owned by General Electric Co pany,
Honeywell International Inc., and Tyco Safety Products Canada LTD, respectively.
Resolution Products, Inc. products will function with one of either GE, DSC or Honeywell
syste s. However, no Resolution product is produced by, endorsed by, nor is officially
associated with GE, Honeywell or DSC. Resolution reco ends verifying operation at
installation.
Warranty
Resolution Products, Inc. will replace products that are defective in their first year.
FCC Notice
This device co plies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
This device ay not cause har ful interference.
This device ust accept any interference that ay be received, including
interference that ay cause undesired operation.
Changes or odifications not expressly approved by the Resolution Engineering, Inc.
could void the user's authority to operate this equip ent.
FCC ID: U5X-RE224GH [pending]
IC Notice
This product eets the applicable Industry Canada technical specifications/Le présent
ateriel est confor e aux specifications techniques applicables d’Industrie Canada.
IC: 8310A-RE224GH [pending]