Returnstar Interactive Tech IQBoard DVT V7.0 User manual

Returnstar Interactive Technology Group Co., Ltd.
1
IQBoard DVT V7.0
(Digital Vision Touch Interactive Whiteboard)
User Manual
Copyright(C) 2003-2013 Returnstar Interactive Technology Group Co., Ltd.
Web: www.recoverystar.com; www.iqboard.net
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]

Returnstar Interactive Technology Group Co., Ltd.
2
Statement
This manual is for IQBoard DVT V7.0.
Use this product strictly according to detailed operation instruction in this manual so
as to ensure proper use. Please read this manual carefully before you install this
product.
Opening the package means you have agreed to purchase this product, Returnstar
will not accept returns of opened packages.
The product specification may be subject to change without prior notice. The sample
pictures in this User Manual may differ from the real product.
Returnstar reserves all rights to charge the fee at anytime for product replacement,
revision and update. The information in this manual is subject to regular change
without prior notice. Returnstar will make no warranties with respect to this product
and disclaims any warranties, whether express or implied, of merchantability and
fitness for a particular purpose.
Trademark Notice
Returnstar and IQBoard are registered trademarks of Returnstar Interactive
Technology Group Co., Ltd.. Windows is a registered trademark of Microsoft
Corporation.
Recycling
Always return your used electronic products, batteries, and packaging materials to
separate collection. This way you help prevent uncontrolled waste disposal and
promote the recycling of materials.
Temperature and Humidity Requirements
Storage
Temperature: -40°C ~ 60 °C Humidity: 0% ~ 95%
Operation
Temperature: -20°C ~ 50 °C Humidity: 15% ~ 85%

Returnstar Interactive Technology Group Co., Ltd.
3
CONTENT
CHAPTER 1 PRODUCT INTRODUCTION ...............................................................................................4
CHAPTER 2 SPECIFICATIONS ...............................................................................................................5
2.1 PERFORMANCE ...................................................................................................................................5
2.2 FLEXIBLE FIXING AND RELOCATING METHODS ..........................................................................................5
2.3 DURABLE SURFACE,SOLID BODY ...........................................................................................................5
2.4 PC CONNECTION................................................................................................................................. 5
2.5 SYSTEM REQUIREMENTS....................................................................................................................... 5
CHAPTER 3 HOW TO INSTALL IQBOARD.............................................................................................. 6
3.1 MOUNT WHITEBOARD （WALL MOUNTING BRACKET）......................................................................... 6
3.2 WALL MOUNTING（L-TYPE BRACKET）................................................................................................ 8
3.3 STAND MOUNTING............................................................................................................................ 10
CHAPTER 4 HOWTOCONNECTTOCOMPUTERANDPROJECTOR...................................................................... 16
CHAPTER 5 HOW TO INSTALL AND UNINSTALL DRIVER..................................................................... 17
5.1 HOW TO INSTALL DRIVER.................................................................................................................... 17
5.2 HOW TO UNINSTALL DRIVER ...............................................................................................................17
CHAPTER 6 HOW TO SETUP IQBOARD .............................................................................................. 18
6.1 ORIENTATION ...................................................................................................................................18
6.2 HOTKEY SETTINGS .............................................................................................................................19
CHAPTER 7 HOW TO USE IQBOARD.................................................................................................. 21
7.1 BASIC OPERATIONS ........................................................................................................................... 21
7.2 HOW TO USE HOTKEYS ON WHITEBOARD....................................................................................... 22
7.3 HOW TO USE TOUCH RECOGNITION ..................................................................................................... 23
7.3.1 Enable Touch Recognition .................................................................................................... 23
7.3.2 Customize Touch Recognition Sensitivity ............................................................................. 24
7.3.3 Basic Operations ................................................................................................................... 25
CHAPTER 8 FAQ ................................................................................................................................ 26
CHAPTER 9 CAUTIONS AND MAINTENANCE..................................................................................... 28
9.1 WHITEBOARD................................................................................................................................... 28
9.2 USB CABLE...................................................................................................................................... 29
9.3 PROJECTION .....................................................................................................................................29
9.4 TRANSPORT ..................................................................................................................................... 29
9.5 PART REPLACEMENT .......................................................................................................................... 29

Returnstar Interactive Technology Group Co., Ltd.
4
Chapter 1 Product Introduction
IQBoard DVT is the latest interactive presentation boards. Connect IQBoard DVT with
your computer and projector, then simply touch the projection area with your pen or
your finger, you can transform the pen or your finger to Mouse and directly operate the
computer on the projection area. IQBoard DVT supports Dual-user Mode, i.e. two
users can operate on the board simultaneously by entering Dual-mode in IQBoard
Software.
With IQBoard DVT and IQBoard Software, marvelous interactive communicating
effects can be achieved in live demonstration, teaching, product exhibition, business
conference, video communication, news broadcast, securities evaluation, military
command, entertainment, medical consultation, engineering design, competition
tactics analysis, weather analysis, etc.
IQBoard DVT is provided with powerful IQBoard Software which makes your
operation on interactive whiteboard more convenient. Through IQBoard Software,
various interactive teaching and demonstrating functions can be achieved, such as
write, erase, label (in character, line, dimension and angle), drag, zoom, reveal screen,
spotlight, screen capture and save, screen record and playback, handwriting
recognition, on-screen keyboard, text input, text to speech, hyperlink to video, sound
and webpage, and remote conference by NetMeeting. IQBoard Software also has
colorful object animation effects, page switching effects and interactive questions.
Therefore, with IQBoard Software users can make more interactive courseware by
designing unique object animation, adding sound or hyper linking.
IQBoard Software also includes 500M IQBoard Resource Library covering more than
30 subjects, such as math, physics, chemistry, biology, gymnasium, etc. User can
customize the installation by selecting subjects. The software also provide common
line, shape, character, symbol, decoration graph, background template, Flash
courseware, and other resources. Moreover, the software supports importing various
picture files and DOC(X), PPT(X), XLS(X), PDF files. The page and file created by
IQBoard Software can be saved as and freely converted to various picture files as well
as DOC(X), PPT(X), XLS(X), PDF, html files, etc.
We provide continuous upgrading service for IQBoard Software. For more information
and detailed operation about IQBoard Software, please refer to IQBoard Software
User Manual in the installation CD.

Returnstar Interactive Technology Group Co., Ltd.
5
Chapter 2 Specifications
2.1 Performance
Resolution: 32768×32768;
Signal tracking rate: 8m/s;
Signal processing rate: 480 dots/s;
Orientation: 4, 9 or 20 points
2.2 Flexible Fixing and Relocating Methods
Fixing methods include wall hanging, cabinets, and mobile stand. Provide optional
height adjustable mobile stand for 50-120 inch whiteboards, the height can be
adjusted from 1.88M to 2.12M. Other sizes of board can be customized.
2.3 Durable Surface, Solid Body
The surface adopts dedicated writing film made of DuPont anti-abrasive coating. It
features with anti-scratch, high luminance, high definition, easy cleaning (can be
cleaned by whiteboard detergent or wet cloth), and can completely eliminate bright
spots. The backboard, which is resistant to distortion, expansion and shrinkage,
adopts PS board with high density. Model supporting normal pen writing is also
provided.
2.4 PC Connection
Connection Way 1:
Standard: 8.8m USB cable for connecting IQBoard with PC, external power is not
required.
Optional: USB signal amplifier to extend the USB cable to 15m.
2.5 System Requirements
Windows XP/2003/Vista/7/8
Intel C2.1 CPU or higher
256 MB RAM or above
1G free hard disk space (for full installation)
1 free USB port
1 projector (short throw or ultra-short throw projector recommended)

Returnstar Interactive Technology Group Co., Ltd.
6
Chapter 3 How to Install IQBoard
Choose a mounting way from below according to your board module.
3.1 Mount Whiteboard （Wall Mounting Bracket）
Parts list
Picture
Name
Quantity
Screw
4
Wall Anchor
2
Safety Bracket
2
Anchor Bolt
2
Wall Mounting Bracket
(already mounted on the
backboard)
2
Installation steps
Step 1. Determine the installation height of the Anchor Bolt (190cm above floor), then
measure the horizontal distance L (70cm recommended) of the two holes on the wall
mounting bracket according to the location of the whiteboard. Drill a hole at both ends,
then screw the 2 Anchor Bolts into the holes and leave 4mm clearance between bolt
head and nut (as shown in the figure below).
Step 2. According to the distance of the two Anchor Bolts, fix the Wall Mounting
Bracket on each screw on the top frame of backboard. Please make sure to fix the

Returnstar Interactive Technology Group Co., Ltd.
7
Wall Mounting Brackets symmetrically on the backboard to keep the balance (as
shown in the figure).
Step 3. Align the Wall Mounting Brackets on the backboard with the Anchor Bolts,
and hang the whiteboard on the wall.
Step 4. Fasten the 2 Safety Brackets on each side of whiteboard lower frame using 2
Screws. According to the location of the Safety Brackets, drill 2 mounting holes on
the wall. Finally, use Wall Anchors and Screws to fix the Safety Brackets on the wall.

Returnstar Interactive Technology Group Co., Ltd.
8
3.2 Wall Mounting（L-type Bracket）
Parts list
No.
Picture
Item
Qty
1
Flat Cross-tapping Screw
8
2
Wall Anchor
8
3
IQBoard L-type Bracket
4
4
EVA Pad
4
Installation steps
Step 1. Determine the fixed position and height of the IQBoard according to the actual
use of the site.
Step 2. Determine the installation height of the bottom L-type Brackets according to
the location of IQBoard on the wall. Then determine the installation height of the upper
L-type Brackets according to the size of your IQBoard. Make sure when you pull up
the upper brackets, IQBoard can be taken out; and when you pull them down,
IQBoard frame can be clasped. Two upper/bottom brackets should be on the same
height level. You will need 2 screws for each of bottom Brackets, and 1 screw for each
of the upper ones. To determine the position of brackets, take an 82”IQBoard for e.g.
as below:
IQBoard
L(mm)
H1(mm)
H2(mm)
82”
700
20
1175

Returnstar Interactive Technology Group Co., Ltd.
9
L
H1 H2
Note:
L: Horizontal distance between 2 upper/bottom brackets.
H1: Distance between the 2 screws on the same bottom bracket.
H2: Distance between the screw on the upper bracket and the upper screw on the
bottom bracket.
Step 3. Put EVA pad into the inside of L-type bracket. (Note: One EVA Pad for eac
Note: Please measure L, H1 and H2 according to your own IQBoard size.

Returnstar Interactive Technology Group Co., Ltd.
10
h of the upper bracket, two for each of the lower one.)
Step 4. Drill 6 holes(70mm in depth) by a 6mm electric drill on the positions of the 6
screws you determined as per above. (2 holes for each of bottom bracket; 1 hole for
each of upper bracket)
Step 5. Put a Wall Anchor into each hole, and screw the brackets with M4*70 flat
cross-tapping screw.
Step 6. Put IQBoard on the fixed 4 L-type Brackets, and let it centered horizontally.
Fasten the upside screws and lock the downside screws.
3.3 Stand Mounting
Parts list
Picture
Name
Quantity
Leg Bar
2
Column
2
Supporting Bar
2
Caster
4

Returnstar Interactive Technology Group Co., Ltd.
11
Moveable Crossbeam
(each includes 2 Beams and a
U-shaped Groove; for 100″, 112″
and 120″ whiteboards, Beams and
U-shaped Grooves are especially
lengthened)
2
Hexagon Bolt A
2
Hexagon Bolt B
(M8×50, with 08/22 washer)
4
Hexagon Bolt C (M8×50)
8
Hexagon Bolt Set A (M8×50)
(each set includes: 1 hexagon bolt,
1 wind nut, 1 M8 nut, 1 small
washer and 1 big washer)
6
Hexagon Bolt Set B (M8×35)
(each set includes: 1 hexagon bolt,
1 wind nut, 1 small washer and 1
big washer)
4
Anchor Bolt (M8×60)
4
Open-end Wrench
1
Installation steps
Step 1. Install Column on each Leg Bar with Hexagon Bolt B.

Returnstar Interactive Technology Group Co., Ltd.
12
Step 2. Install one end of each Supporting Bar on each Leg Bar, using Hexagon Bolt
A.
Step 3. Install the other end of each Supporting Bar on each Leg Bar, using Hexagon
Bolt Set A. In this stage, please partially screw the bolt, leaving 4mm clearance
between bolt head and Column for hanging whiteboard.
Step 4. Install 2 Casters on each Leg Bar.

Returnstar Interactive Technology Group Co., Ltd.
13
Step 5. Install 2 Beams on each Column, using Hexagon Bolt C
Step 6. Lay down and connect the two leg assemblies with U-Shaped Grooves.
Step 7. Secure U-Shaped Grooves with Hexagon Bolt Set B. In this stage, do not
completely tighten the bolt in order to adjust the stand width later.
Step 8. Install 2 Hexagon Bolt Sets A on each Column, leaving 4mm clearance
between bolt head and nut for hanging whiteboard.

Returnstar Interactive Technology Group Co., Ltd.
14
Step 9. Fix 4 Brackets on screws on backboard according to the vertical height of
Hexagon Bolt Sets A. Please make sure to fix the Brackets symmetrically on the
backboard to keep the balance (as shown in the figure).
Step 10. Align the Hexagon Bolt on the Column with the clip holes of Height
Adjustable Bracket on left and right frames of backboard, and hang the one side of
whiteboard on the stand. Then adjust the stand width to fit the whiteboard, and hang
other side of the whiteboard on the stand. Finally, tighten the bolts on the U-Shaped
Groove and Columns.
Note: You can adjust the height of whiteboard by screwing the Brackets on different
height of backboard (The distance between lower frame of whiteboard and floor is
75-80cm recommended).

Returnstar Interactive Technology Group Co., Ltd.
15
Fully assembled whiteboard is as follows:

Returnstar Interactive Technology Group Co., Ltd.
16
Chapter 4 HowtoConnecttoComputerandProjector
After fixing the whiteboard, find a connecting port at the bottom of left corner protector.
Plug the USB Standard-B into the connecting port, and plug the USB Standard-A into
the available USB port of computer, as follows. External power source is not required.
And please connect the projector into the VGAport of your PC video card.
USB Standard-A Plug for connecting the
computer
USB Standard-B Plug for connecting
whiteboard
Start the projector after connection, and adjust it to make its projection within the
active area and centered. Then use the trapezoid rectification function of the projector
to make the projection quadrate.
(The blue areas are the maximum projection areas. For whiteboards without hotkey, there
should be 1cm margin between projection area and whiteboard inner frame. For whiteboards
with soft hotkeys, the projection area should not exceed the hotkeys.)
Note:
1. In case you use 16:9 whiteboard, please choose the projector supporting the 16:9
projection mode.
2. The projection image must be within the active area of the whiteboard, otherwise the
whiteboard cannot work normally.

Returnstar Interactive Technology Group Co., Ltd.
17
Chapter 5 How to Install and Uninstall Driver
5.1 How to Install Driver
Run “IQBoard DVT Drivers V7.0.exe” in the installation CD, and install the drivers
according to the prompt. The computer will automatically find a new hardware and
install the driver.
5.2 How to Uninstall Driver
Select “Start > Programs > IQBoard DVT Drivers >Uninstall” to uninstall. You also can
open Control Panel, select “Add/Remove Programs”, and in the list of currently
installed Programs, select “IQBoard DVT Drivers”, then press the “Change/Remove”
button to remove the driver.

Returnstar Interactive Technology Group Co., Ltd.
18
Chapter 6 How to Setup IQBoard
6.1 Orientation
At the first time you use IQBoard, you need to orient it, so the moving track of the pen
(finger) can match the cursor. You can select 4 points, 9 points or 20 points orientation.
Normally 9 points orientation is adopted. After the whiteboard is oriented, you don’t
need to re-orient under the same environment.
To orient the whiteboard
Please do as following steps when you orient the whiteboard:
Step 1. Select “Start > Programs > IQBoard DVT Drivers > Orient”or press on
the hotkey bar if your whiteboard is with hotkeys. Then the Orientation Points
Selection window appears as follow.
Step 2. Select one of the Orientation Points and click “OK”, the Orientation interface
appears as follow.

Returnstar Interactive Technology Group Co., Ltd.
19
Step 3. Follow the on-screen instructions, press the center of each cross accurately
with the pen or finger tip.
Your whiteboard is now oriented.
6.2 Hotkey Settings
If you select interactive whiteboard with soft hotkeys, at the first time you use the
whiteboard, you need to set these hotkeys.
Step 1. Select “Start > Programs > IQBoard DVT Drivers > Soft Hotkey Settings”to
enter the setting window as follow.
Step 2. Follow the indication on screen, click relevant hotkey in sequence. After the
setting is completed, you can use these hotkeys.
Note:
1. If you did not locate the accurate central point or clicked the wrong point, or the next
fixed point appeared without press, please press “ESC” on the keyboard to exit this
orientation and re-orient. Otherwise you can’t operate the whiteboard accurately.
2. Please make your pen (finger) upright when orienting.
3. In case the relative position of the whiteboard and projector is changed, or the driver or
the monitor resolution is altered, please re-orient.

Returnstar Interactive Technology Group Co., Ltd.
20
Note: When setting the soft hotkeys, if some error occurs, you can press “ESC” key
on the keyboard to exit the setting process, and then reset the hotkeys.