Revo IT9000 User manual

Microsoft® Windows® CE 5.0
Entry Level Handy Terminal
Version 1.1
August / 12/ 2011

H
andy
T
e
r
m
i
nal
U
s
e
r
G
u
i
de
2
Table of C on te n t s
Charpt 1. Re f e r e n ce s.................................................................................................4
1.1. General Use And Product Safety................................................................4
1.2. Federal Communication Commission Interference Statement ....................5
1.3. SAR C o m p lia n ce .......................................................................................7
1.4. WEEE Compliance....................................................................................7
1.5. System Sp eci f icati ons................................................................................7
1.6. Environment Standard...............................................................................9
1.7. Product Label ............................................................................................9
1.8. WarrantyAnd After S e rv ice ..................................................................... 10
Charpt 2. In t rodu cti on............................................................................................. 11
2.1. Package Contents .................................................................................... 11
2.2. General View........................................................................................... 11
2.2.1. Handy Terminal Front Side View ................................................. 12
2.2.2. Handy Terminal Back Side View.................................................. 12
2.3. Keypad Description ................................................................................. 14
2.3.1. Key Maps and Be h a v i or............................................................... 14
2.3.2. Numeric Keypad Alpha Mode and Triple Click ........................... 16
2.3.3. Function Key............................................................................... 18
2.3.4. The Soft Keypad .......................................................................... 20
2.4. Scanning Barcode....................................................................................21
2.5. Resetting the Handy Terminal..................................................................22
2.5.1. Software (Warm) Reset ................................................................ 22
2.5.2. Cold Reset ................................................................................... 22
2.6. Saving to F la sh........................................................................................ 23
Charpt 3. Getting Started.........................................................................................25
3.1. Charging the Battery Pack....................................................................... 25
3.1.1. Installing the battery pack ............................................................ 25
3.1.2. Charging the battery pack with Power Ad a p te r............................. 26
3.1.3. Charging the battery pack with Single Dock................................. 27
3.2. Starting the Handy Terminal .................................................................... 28
3.3. Power (and Backlight) on / off................................................................. 28
3.4. Navigating the Display ............................................................................ 28
3.4.1. The Command Ba r....................................................................... 29
3.4.2. The Task Bar................................................................................ 29

H
andy
T
e
r
m
i
nal
U
s
e
r
G
u
i
de
3
3.4.3. Using the S t y l us........................................................................... 29
3.5. Calibration of the touch Screen................................................................ 30
3.6. Control Panel...........................................................................................30
3.6.1. Barcode Setting............................................................................ 31
3.7. Backup and Restore Function.................................................................. 33
Charpt 4. Communication ....................................................................................... 35
4.1. Bluetooth D e v ice ..................................................................................... 35
4.1.1. Connect to a Bluetooth d e v ice ...................................................... 35
4.1.2. File transfer between two Terminals............................................. 37
4.2. Ethernet Network .................................................................................... 38
4.3. Microsoft® ActiveSync® ........................................................................ 39
4.4. Federal Communication Commission Interference Statement .................. 40
Charpt 5. Appendix................................................................................................. 42
5.1. Windows Core Version Support I tem ....................................................... 42
5.2. AIM Code Identifiers of Symbol SE955.................................................. 55

H
andy
T
e
r
m
i
nal
U
s
e
r
G
u
i
de
4
Charpt 1. References
Reserves the right to make improvements or changes in the products d e s c r i b e d
i n this document at any time without notices. While reasonable efforts have been
made in the preparation of this document to assure its accuracy, assumes no
liability resulting from any errors of omissions in this guide, or from the use of the
information contained herein. Further, reserves the right to revise this publication
and to make changes to it from time to time without any obligation to notify any
person or organization of such revision or changes.
This document is copyrighted. All rights are reserved. This document may not, in
whole or in part, be copied, photocopied, reproduced, translated or reduced to any
electronic medium or machine-readable form without prior consent, in writing.
1.1. General Use And Product Safety
ÿ Do not stare into the laser beam directly or shine it into eyes.
ÿ Never use strong pressure onto the screen or subject it to severe impact,
as the LCD panel could become cracked and possibility cause personal
injury. If the LCD panel is broken, never touch the liquid inside, for
such contact would irritate the skin.
ÿ Although the handy terminal has been passed the test of IP54 standard
for water and dust resistance, avoid prolonged exposure to rain or other
concentrated moisture. For these conditions exceed the IP54 standard,
and could result in water or other contaminants entering into the handy
terminal.
ÿ Use only the approved AC Adapter with the Terminal. Use of an
unapproved AC Adapter could result in electrical problems, or even
cause a fire or electrical shock to the user.
ÿ Be sure that only authorized supplier are allowed to disassemble and
reassemble the device. If the device or parts has been damaged due to
any wrong handling, shall void the product and parts warranty.
ÿ Always make back-up copies of all important data. Easy done by using a

H
andy
T
e
r
m
i
nal
U
s
e
r
G
u
i
de
5
cable or Single Cradle (sold by optional) to transfer data to the computer.
Manufacturer is not liable for any data damages or data loss caused by
deletion or corruption by using of this device, or due to the drained
battery.
ÿ Lithium-ion battery packs might get hot, explode, ignite and/or cause
serious injury if exploded by abusive using. Please follow the safety
warnings listed as below:
¤ Do not place the battery pack in fire or heat the battery.
¤ Do not install the battery pack backwards so the polarityis reserved.
¤ Do not connect the positive Battery pack with negative battery
pack to each other with any metal object (like wire).
¤ Do not carry or store battery pack together with metal objects.
¤ Do not pierce the battery pack with nails, strike the battery pack with
a hammer, step on the battery pack or otherwise put it to strong
impacts or shocks.
¤ Do not solder directly onto the battery pack.
¤ Do not expose battery pack to liquid, or allow the battery contacts to
get wet.
¤ Do not disassemble or modify the battery pack. The battery pack
contains safety and protection devices, which, if damaged, may
cause the battery pack to generate heat, explode or ignite.
¤ Do not discharge the battery pack using any device except for the
specified device. When it is used in devices other than the specified
devices, the battery pack can be damaged or its life expectancy
reduced. If the device causes any abnormal current to flow, it may
cause the battery pack to become hot, explode or ignite and cause
serious injury.
¤ In the event the battery pack leaks and the fluid gets into one’s eye,
do not rub the eye. Rinse well with water and immediately seek
medical care. If left untreated, the battery fluid could cause damage
to the eye.
1.2. Federal Communication C
o mm i ss ion
Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.

H
andy
T
e
r
m
i
nal
U
s
e
r
G
u
i
de
6
NOTS
：
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the part
responsible for compliance could void the user's authority to
operate this equipment.
IMPORTANT NOTE
：
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. To maintain compliance with
FCC RF exposure compliance requirements, please follow operation instruction
as documented in this manual.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.

H
andy
T
e
r
m
i
nal
U
s
e
r
G
u
i
de
7
1.3. SAR Compliance
This equipment has been SAR-evaluated for use in laptops (notebooks)
with side slot configuration.
Caution
：
Please also note that Terminal is limited in CH1~CH11 for
2.4GHz by specified firmware controlled in U.S.A.
The FCC ID of Handy Terminal is SPY-PDT
1.4. WEEE Compliance
This symbol is placed on the product to remind users to dispose of Waste
Electrical and Electronic Equipment (WEEEE) appropriately, per
Directive Europe 2002/96/EC. In most areas, this product can be
recycled, reclaimed and re-used when properly discarded. Do not discard labeled
units with trash.
1.5. System Specifications
P
r
o
c
e
ss
o
r
Marvell PXA270 with 312 MHz 32 bits RISC
CPU
M
e
m
o
r
y
-
2G
B
F
l
a
sh
R
O
M
- 64 MB SDRAM
D
i
s
p
l
ay
a
n
d
T
o
u
c
h
P
a
n
e
l
- Trans-missive Micro Reflective 2.4” TFT
256K Color QVGALCD with high brightness
LED backlight
- Resistive type touch panel (optional)
A
ud
i
o
- Two
bu
zz
e
r
s
R
F
R
a
di
o
Supp
o
r
t(
O
p
t
i
o
n)
- Wireless
L AN
-
802.
1
1
b
/
g
W
i
r
e
l
e
ss
L
A
N
- Compliant with WPAand IEEE 802.11i
WPA2
- Cisco Compatible Extensions (CCX)

H
andy
T
e
r
m
i
nal
U
s
e
r
G
u
i
de
8
V
e
r
s
i
o
n
4
c
e
r
t
i
f
i
c
a
t
i
on
- Support full range of 802.1x(EAP) including
EAP-TLS, EAP-FAST, LEAP,
PEAP-MSCHAPv2 and PEAP-GTC
- Support Static, Pre-shared and Dynamic
encryption 40-bit and 128-bit keys. WEP,
WPA: TKIP and WPA2:AES
- Support coexistence with Bluetooth
R
F
R
a
di
o
Supp
o
r
t(
O
p
t
i
o
n)
-Bluetooth W P AN
-
-
C
l
a
ss II
w
i
t
h
V
2
.
0
c
o
m
p
li
a
n
t
-- Range 10 m
-- Support coexistence with WiFi
E
x
t
e
r
n
a
l
C
o
nn
ec
t
P
o
r
t
s
- One I/O connector support USB Client and
power input
- I/O connector supports connection for USB
cable, cradle and power adapter
- USB supports USB Client with USB 1.1
compliant
S
c
an
E
n
g
in
e
-
M
oto
r
o
l
a
SE
95
5
1
D
l
a
s
e
r
sc
a
n
ne
r
I
nd
i
c
a
t
o
r
-
On
e
t
w
o c
o
l
o
r
L
E
D
fo
r
c
h
a
r
g
e
r
s
t
atu
s
indicator
Red: Charging
Green: Fully charged
- One two color LED scanner indicator
Red: S canning
Green: Good scan
B
a
tt
e
r
y
- Standard battery pack: 1100mAH, 3.7V,
Li-Ion
- Extended battery pack: 2000mAH, 3.7V,
Li-Ion
- One rechargeable 15mAH, 2.4V Li-MH
backup battery
- One battery cover sensor switch
- Battery charge time:
1100mAH battery pack: 2.5 hours
2000mAH battery pack: 4.0 hours

H
andy
T
e
r
m
i
nal
U
s
e
r
G
u
i
de
9
Power Adapter
-
100
~
240
V
a
c,
5
0/60
H
z
I
n
put
- 5Vdc/3Adc, Wall Mount
B
u
t
t
o
n
/
K
e
y
-
On
e
2
3
-
k
e
y
n
u
m
e
r
i
c k
e
y
pad
- Four function keys
- Two direction keys
- One scan key
- One power button
D
i
m
e
n
s
i
o
n
s
135
(
L
)
x
50
(
W
)
x
25
(
H
)
m
m
W
e
i
g
h
t
170g including 1100mAH battery pack
190g including 2000mAH battery pack
S
o
f
t
w
a
r
e
-
W
i
n
C
E
5
.
0
C
o
r
e
V
e
r
s
i
o
n
- Backup manager, Scanner Setting utility,
- SDK and BSP development software
1.6. Environment Standard
S
t
o
r
age
T
e
m
p
e
r
a
t
u
r
e
-25~ 60
Op
e
r
a
t
i
on
T
e
m
p
e
r
a
t
u
r
e
-10~ 50
H
u
m
i
d
i
t
y
95% non-condensing @ 40
℃
F
r
e
e
D
r
op
1.2m (4ft) drop to concrete, 3 drops per 6
surfaces
T
u
m
b
l
e
D
r
op
100 times 2 feet tumbles (200 drops)
E
n
v
i
r
on
m
e
nt
a
l
S
ea
l
i
ng
IP54 Standard
ESD
+/-8KVAir Discharge, +/-4KV Contact
Discharge
R
e
g
u
la
to
r
y
C
o
m
p
l
ia
n
ce
CE, CB, FCC, NCC, SRMC, CCC
1.7. Product Label
The Handy Terminal has several labels as showed in Figure 1-1.

H
andy
T
e
r
m
i
nal
U
s
e
r
G
u
i
de
10
Figure 1-1
1.8. Warranty And After Service
Should this Handy Terminal be malfunctioned, please contact your original
retailer providing information about the product name, the serial number, and the
details about the problem.