Remote control Operation
1
Remote control
The M100 remote control is already
programmed for the Revox world. It can
also be programmed for a wide range of
televisions from many different
manufacturers through a 3 digit code. In
this case the most important base
functions for the corresponding television
are predefined, whereby the volume
control, even at the TV level, always
operates the Revox devices. In many
cases, the television volume control is
assigned to the
Right/ Left
navigation
keys. The M100 remote control does not
represent a full-function replacement for
the original television remote control.
You will find a complete description of the
programming in the
TV Programming
chapter.
Caution: Lithium batteries
Batteries shall not be exposed to
excessive heat such as sunshine, fire
or the like.
Danger of explosion if battery is
incorrectly replaced. Replace only with
the same or equivalent type.
Television models that can be
intelligently controlled through the
Re:connect products M200 and M203 are
shown bold, and in
italics
in the tables.
Changing the battery
If the batteries in the remote control get
weaker, as indicated by a shorter
operational range, they can be replaced
easily. To do this, remove the battery
compartment cover on the back of the
remote control and ease the batteries
out using the tip of ballpoint pen at the
positions shown in red. Insert the new
batteries making sure that the polarity is
correct. Both batteries should always be
exchanged at the same time.
Rear view: M100 Remote control
Replacement batteries: 2 x CR 2025 / 3V
Disposal of the batteries
The batteries supplied with
the remote control do not
contain any harmful
substances such as cadmium, lead or
mercury. Discharged batteries may not
be disposed of with the normal
household rubbish. You can dispose of
old batteries free of charge at
corresponding collection points found in
many shops. You will also find a
container for old batteries at your
specialist dealer.
