RGBlink VSP 516S User manual

VSP 516S Quick Start
VIEWSIZE THE WORLD
Max 2048×1152@60Hz/2560×816×60Hz
input/output resolution
User customize output resolution
3G/HD/SD-SDI input
Multiple cascade mapping for super resolution
Seamless switching between inputs
Auto input format detect and conversion
Picture in picture
Audio and video sync

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: [phone] Fax:[phone]
Email: [email protected] http://www.rgblink.cn
1
CONTENT
Product Introduction...............................................................................................................................2
Packing Configuration............................................................................................................................3
Hardware Orientation..............................................................................................................................4
Front Panel.........................................................................................................................................4
Back Panel .........................................................................................................................................5
Operating Instruction..............................................................................................................................7
Content...............................................................................................................................................7
How to Realize Single Image Switching.....................................................................................8
How to Set up the PIP.................................................................................................................8
How to Do Customized Output Resolution.................................................................................9
How to Set up the Size and Position of the Single Image........................................................10
How to Set up Image Zoom......................................................................................................10
How to Realize the Screen Size and Full Size Switching.........................................................11
How to Realize the Text Overlay Setting ..................................................................................12
How to Set up the Volume........................................................................................................13
How to Set up the Playlist.........................................................................................................13
How to Save the Parameter......................................................................................................16
How to Load the Saved Parameter...........................................................................................17
How to Achieve Multiple Cascade ............................................................................................18
Product Application...............................................................................................................................21
Multiple Mosaic.................................................................................................................................21
Contact Information...............................................................................................................................23

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: [phone] Fax:[phone]
Email: [email protected] http://www.rgblink.cn
2
Product Introduction
VSP 516S is a video scan converter and scaler. It
has nine video and graphic inputs and five pairs
of audio inputs. It accepts all video signals
including RGB computer video, HDTV and
standard definition video. It automatically detects
input formats and converts input resolutions, as
well as process synchronized audio and video.
It supports seamless switching, higher
resolution and refresh rate features, meeting
the demand for quick AV synchronization and
application requirements. VSP 516S had been
introduced into LED video processor market
for 3 years, and it is a welcome model for its
incomparable cost performance.
System Connection
RGBlink offers solutions to
demanding technical problems.
Any application questions, or
required further information,
please contact with our
customer Support Engineers.
VSP 516S (with audio) System Connection Diagram
VSP 516S (with two sending cards) System Connection Diagram

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: [phone] Fax:[phone]
Email: [email protected] http://www.rgblink.cn
3
Packing Configuration
Note: SDI cable is only for VSP 516S.
Chinese Standard,American Standard or European Standard power cord is option.
Power Cord
SDI Cable
Quick Start
DB9 to RJ11
Cable
RCA to BNC
Cable
DVI 转HDMI 线
DVD Disk
Certification
防静电袋
DVI-D Cable
Antistatic Bag
USB Cable

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: [phone] Fax:[phone]
Email: [email protected] http://www.rgblink.cn
4
Hardware Orientation
Front Panel
Button Instruction
MENU/EFFECT
Menu and effect reuse button
DVI
DVI signal source button
SAVE/PIP1
Save and PIP reuse button
DP
Displayport signal source button
LOAD/PIP2
Load and PIP reuse button
SDI
SDI signal source button
SCALE/CROP
Scale and crop reuse button
BLACK
Black button
H SIZE/H POS
Width and horizontal position
setting reuse button
IMAGE1/
IMAGE2
IMAGEA and IMAGE B select
reuse button
V SIZE/V POS
Height and vertical position
setting reuse button
FREEZE
Freeze button
CV1,CV2,CV3
CVBS signal source button
0~9
Number button, use for scale
and custom setting
SVID
S-Video signal source button
OLED Panel
Show operation menu items
VGA
VGA signal source button
Knob
Confirm and adjust LCD menu
YPBPR
YPBPR signal source button

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: [phone] Fax:[phone]
Email: [email protected] http://www.rgblink.cn
5
Back Panel
VSP 516S back panel with audio:
Input Interface
1
3G-SDI input BNC Port
6~15
Audio Input Port
21
Displayport Input Port
22~24
CVBS Input BNC port
25
S-Video Input DIN 4 Port
26
DVI Input DVI-I Port
27~29
YPbPr Input
30
VGA Input DB15 Port
Other Interface
2
Dial Switch
3. 16. 17
10/100M Interface RJ45
4. 19
USB Interface USB-B Port
5
RS232 Interface
18
Power Supply Port of Sending Card
20
DVI Input Port of Sending Card
34
Power Switch
35
Power IEC-3
Output Interface
31
Audio Output
32
DVI Output DVI-I port
33
VGA Output DB15 port

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: [phone] Fax:[phone]
Email: [email protected] http://www.rgblink.cn
6
VSP 516S back panel with sending card:
Input Interface
1
3G-SDI input BNC Port
17
Displayport Input Port
18~20
CVBS Input BNC port
21
S-Video Input DIN 4 Port
22
DVI Input DVI-I Port
23~25
YPbPr Input
26
VGA Input DB15 Port
Other Interface
2
Dial Switch
3.6.7.11.12
10/100M Interface RJ45
4. 9.14
USB Interface USB-B Port
5
RS232 Interface
8.13
Power Supply Port of Sending Card
10.15
DVI Input Port of Sending Card
16
Power Switch
30
Power IEC-3
Output Interface
27
Audio Output
28
DVI Output DVI-I port
29
VGA Output DB15 port

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: [phone] Fax:[phone]
Email: [email protected] http://www.rgblink.cn
7
Operating Instruction
Content
How to Realize Single Image Switching
How to Set up the PIP
How to Do Customized Output Resolution
How to Set up the Size and Position of the Single Image
How to Set up Image Zoom
How to Realize the Screen Size and Full Size Switching
How to Realize the Text Overlay Setting
How to Set up the Volume
How to Set up the Playlist
How to Save the Parameter
How to Load the Saved Parameter
How to Achieve Multiple Cascade

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: [phone] Fax:[phone]
Email: [email protected] http://www.rgblink.cn
8
How to Realize Single Image Switching
1. Boot the system default CV1 to the current input source, if need seamless switching other
source such as DVI, push DVI button.
2. CV1 button light turns off after pushing DVI button. DVI button light is on if the DVI signal is
effective and stable. And if the DVI signal is invalid or no input, DVI button light will flash. The same
method can be switched CV2, CV3, SVID, YPbPr, VGA, SDI and DP.
Note: Only cut switching is supported among the switch of CV1, CV2 and CV3.
How to Set up the PIP
Push the [SAVE/PIP1] or [LOAD/PIP2] button for two times, button led light turn on, and enter the PIP
function menu.
LAYOUT: Can choose PIP layout, the corresponding results are as follows:
PIP L+T PBP L+R PBP T+B
SWAP IMAGE: It can set PIP to swap exchange, when choose ON, it can realize the IMAGE A and
IMAGE B exchange.
ALPHA: Can set the image transparency, the regulating range is among 0 to 16.
SELECT: Can choose to set the size or position of IMAGEA or IMAGE B individually.

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: [phone] Fax:[phone]
Email: [email protected] http://www.rgblink.cn
9
How to Do Customized Output Resolution
Push the [MENU/EFFECT] button to enter the menu items, turn the knob and choose [OUTPUT], push
the knob to confirm. Turn the knob, choose [OUTPUT FORMAT], push knob to confirm and go into the
output format menus, as following:
STANDARD--Standard resolution.
CUSTOM--Used defined resolution setting.
Push knob and go into <CUSTOM> menu:
1. Turn knob on each digital position, and change the value of the digital by the digital buttons on the
front panel.
2. After the digital, push the Knob will add *, means before * is the horizontal size. Same operation for
vertical size:
3. After the digital, push the Knob will add @, means before the @ is the vertical size, and after the @ is
the refresh rate. Only digital 50 or digital 60 supports for the refresh rate. Use the digital buttons to
finish the settings.
4.After input all the values, push knob to enable VSP 516S to output this resolution. VSP 516S will take
5-10 seconds to enable this output resolution.