RHINO COFFEE GEAR Spinjet Configuration guide
Rhino coffee gear - Spinjet
rinser cleaning instructions
Contents
Please note
Spinjet Rinser Parts Diagram
Rinser Valve - Exploded Parts Diagram
A. B.
4.
C.
4 .
Rhino coffee gear - Spinjet
rinser cleaning instructions
Cleaning of the Rhino Coee Gear Spinjet rinser.
1. Daily cleaning procedure
2. Cleaning the Spinjet and actuator star
a.
11.
b.
12.
Rhino coffee gear - Spinjet
rinser cleaning instructions
4. Clean the waste water lines
5. Reassemble the rinser and reconnect the Spinjet
3. Clean the rest of the sink
A. B. C.
Preventa�ve Maintenance:
Indica�ons that your gaskets and/or seals require replacement:
Replacing the O-rings
on Rhino Pitcher Rinser VALVES
Service & Maintenance for commercial installa�ons
(RHSPVSK-01)
Replacing the O-rings
on Rhino Pitcher Rinser VALVES
Replacing the O-rings
on Rhino Pitcher Rinser VALVES
Rhino coffee gear - Spinjet
rinser cleaning instructions
Troubleshoo�ng
Problem: The rinser is leaking. When not in use, a small amount of water trickles from the rinser head,
or around the actuator
Solu�on:
Problem: The actuator is hard to depress
Solu�on:
Problem: The actuator does not bounce back up when pressure is removed (IE if you remove the milk pitcher but
water con�nues to spray upwards)
Solu�on:
Problem: Water pressure from the rinser is too low / too high
Solu�on:
Problem: The rinser head (including the actuator plate) is loose, wobbling, or detaches from the sink
Solu�on:
Table of contents
