RHYTHM X10 User manual
3.Please do not listen for a long time at high volume to avoid hearing damage.4.For your safety,please do not turn the volume too high while running outside to ensure that you can hear sound in your surroundings.1.Please do not use headphone while driving and charging.2.Please use cautiously and stop using headphone in dangerous situation.2.Keep away from children to avoid danger from improper use.4.Do not submerge headphone in the water.5.Do not use corrosive cleaner/oil to clean headphone6.Turn off headphone Bluetooth and ANC function to save power when you do not use headphone.1.Use original or certified cables for charging and voltage within 6.3V.Power will be cut off and start protection mode when the voltage exceed 6.3V and within 36V.Headphone will be broken when the voltage over 36V.3.Avoid dropping headphone and operating in the extreme temperature. Please use headphone within operation temperature range: -15 °C (5 F) – 55°C(131 F).Safety instructionsHearing safety: Operation Safety:23What's in the BoxX10 Headphone *1Micro USB Charging Cable *1Audio Cable *1
Volume Down/Next SongMulti-function ButtonVolume Up/Previous Song
ANC ButtonCharging PortMicrophonesAUX Port
At a Glance45Bluetooth/ANC LED indicator lightUse ANC FunctionHow to Use(the LED indicator light will be green when ANC ON.)Press the ANC Button to turn Active Noise Cancellation ON/OFFUse Bluetooth Function1.Hold the Multi-function Button for 3-5 seconds to turn headphone Bluetooth on,then enter pairing mode.(the LED indicator light will be blue and red flashing quickly.) 2.Start your mobile phone Bluetooth and find headphone Bluetooth pairing name "X10" to click it to pair.(the LED indicator light will be blue flashing slowly after pairing successfully.)3.Hold the Multi-function Button for 3-5 seconds to turn headphone Bluetooth off.Press to adjust volume. Long press to skip to next/previous song.Double-press the Multi-function Button to reject an incoming call.Press the Multi-function Button to play/pause music or answer/end call.23-5S1Press the multi-function button three times toactivate voice dialing function3
Function DetailsEasy Paring1. Hold the Multi-function Button for 3-5 seconds to turn headphone Bluetooth on,then enterpairing mode.(the LED indicator light will be blue and red flashing quickly.) 2. Keep headphone and your mobile phone as close as possible during pairing process.3. Turn on your mobile phone Bluetooth. Search for headphone Bluetooth signal on mobile phone and click “X10” to pair.(the LED indicator light will be blue flashing slowly after pairing successfully.)4. If you are asked for a password/PIN code during pairing procedure,please enter "0000" (four zeros).Pair to the Second Bluetooth Device1. Please make sure that headphone is connected to the first Bluetooth device successfully and music is not playing.2. Hold the Multi-function button until the headphone switch off and continue with the steps "Easy Pairing"(Let the headphone re-enter pairing mode,the LED indicator light will flash blue and red alternately).3. Pair headphone with the second device according to "Easy Pairing" steps.4. Return to the first Bluetooth device and pair it with headphone again. Now both of your devices are paired with headphone.67Active Noise Canceling(ANC) ON/OFFTo turn on ANC, press the ANC Button;(the LED indicator light will be green when ANC ON.)(the LED indicator light green color will be off when ANC OFF.)To turn off ANC, press the ANC Button;Wired ModeANC also works in wired mode.Microphones only works in Bluetooth mode,not for wired mode.Please note that CAN NOT adjust volume on headphones in wired modeHeadphone support AUX input for wired external audio source connection. Simply turn headphone Bluetooth off and plug in the audio cable.For any ANC Bluetooth headphone,it is still need battery power support for wired mode.
Voice DialingPress the multi-function button three times to activate voice dialing function(compatible with iPhone Siri and selected Android voice dialing software).How to WearFolding to be portableAdjustable Headband89Headphone SpecificationLED Indicator LightPairing: Blue and red lights flash alternatelyPaired: Blue light flashesPlaying:Blue light slowly flashesCharging: Red light turns onBluetooth OFF: Blue and red lights turn offANC ON: Green light turns onFull Charge: Red light turns off Battery Low: Red light turns on with voice promptANC OFF: Green light turns off* Please kindly note that perhaps sometimes these LED indicator light color will be mixed to become other colors(pink,purple,etc.) occasionally.
Technical Specification•Impedance: 32 Ω•Waterproof rating: IPX4•Bluetooth range: 10m/33ft•Frequency response: 20Hz–20KHz•Chip: ATS3009•Use time: 12-16 hours•Bluetooth profile: A2DP, AVRCP, HSP, HFP•Net weight: 228g •Driver diameter: Φ40mm•Battery capacity: 750mAh•Charging time: 2.5hours•Input: 5V/1A 1011Delete Pairing: Hold both "Volume Up" and "Volume Down" buttons simutaneously for 5 secondsIf any issues, here tips for you:1. Full charge your headphone(don't use fast charger)2. Reset headphone by inserting audio cable into headphone audio socket then removing it. Or the upgraded X10 headphones would be reset automatically when charging.Charging Use the included micro USB charging cable to connect to headphone Charging Port. Connect the other end of charging cable to a computer USB port or USB wall charger under 6.3V voltage.Turn off headphone Bluetooth and ANC function before charging.Please don't use headphone while charging.The LED indicator light will be off or blue color when full of charge basing on headphone turn off status.Hold the Multi-function Button for 3-5 seconds to turn headphone Bluetooth off.Start your mobile phone Bluetooth and find headphone Bluetooth pairing name X10 to click it to pair.(the LED indicator light will be blue flashing slowly after pairing successfully.)
Q&AA: Please check if your headphone is in pairing mode or re-connection mode,check if Bluetoothsearch function of your Bluetooth device is turned on,if all done,then go to Bluetooth menu of your Bluetooth device,delete/ignore the headphone Bluetooth pairing name X10.After that,you can try to reconnect Bluetooth according to above “Easy Pairing” steps.A: Please double check the battery status of your headphone.4. Q: Can I use headphone while driving?A: For your safety,we strongly recommend that you do not use headphone while driving to avoid distraction.5. Q: Why does headphone sometimes disconnects with Bluetooth device within 10 meters?A: Please check if there are any metal materials or obstacles within a relatively close range or your surroundings that perhaps interfering with Bluetooth connection.This may happen becauseBluetooth is a radio technology which is sensitive to objects between headphone and other devices.6. Q: Why can't I hear any sound from my computer or mobile phone?A: Please check if output channel of your computer supports A2DP profile.Also check the volume settings on your headphone and computer/mobile phone.A: No,you can not.Headphone uses a built-in non-detachable Li-Polymer battery that can't be replaced.7. Q: Why am I unable to use headphone to control the volume of a track playing on an APP on my mobile phone?A: Due to configurations of different application software,headphone may not be completely1. Q: Why can't headphone pair with my mobile phone?2. Q: Why can't headphone turn on?3. Q: Can I replace battery in the headphone?compatible with some APPs.1213A: This is one of our special features. When users insert an audio cable into headphone audio port, all Bluetooth feature buttons stop working and Bluetooth turns off. But,Bluetooth will be available again when audio cable is moved.audio port,then removing it.Before re-connecting,kindly remember to delete/ignore headphone bluetooth pairing name X10 on your mobile phone.8. Q: What do I do if Bluetooth can not close or open?A: Please reset Bluetooth function of headphone by inserting an audio cable into headphone9. Q: Why does Bluetooth turn off when I connect an audio cable?A: Please note that ANC and Bluetooth are indicated by the same LED indicator light(but different light color), with a green light for ANC and a blue light for Bluetooth. If you need to turn Bluetooth on/off,you can turn off ANC firstly in case that you make confused by the color lights.But you will be very familiar with the light color meaning after using few times because it is simple and easy.A: Some customers have mentioned poor audio quality on Windows PC.Please note that there are “Headset” and “Headphone” modes you can toggle by changing your output device.Selecting “Headphone Mode” will drastically improve the audio quality.”Headset Mode” is designed for highly compressed VOIP calls,etc.That’s not the fault of headphone product,that’s just the limitation of that protocol.If you are in “Headphone Mode”,the audio quality is fantastic.10. Q: Why can't I turn headphone on/off?11. Q: Why does audio quality become poor on Windows PC?
FCC Caution:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.1415This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with distance ＜5mm between the radiator& your body.This device complies with Innovation, Science, and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) l'appareil nedoit pas produire de brouillage, etexposure and compliance. The distance from body to use the device is ＜5mm.(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.Le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement économique Canadaapplicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.The device is compliance with RF exposure guidelines, users can obtain Canadian information on RFLe présent appareil est conformeAprès examen de ce matériel aux conformité ou aux limites d’intensité de champ RF,les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance d’acquérir les informations correspondantes. La distance minimale du corps à utiliser le dispositif est de 5mm.IMPORTANT NOTE: FCC Radiation Exposure Statement:ISEDC warning
Table of contents
