Richmar 201-788 User manual

OPERATION MANUAL
BOTTLE WARMER
Compass Health Brands Corp.
Toll Free 1.888.549.4945
6753 Engle Road
Middleburg Heights, OH 44130
richmarweb.com

1
FOREWARD
This manual has been authored for the
owners and operators of the Bottle Warmer.
It contains general instructions of operation,
precautions, maintenance, and parts
information. In order to maximize its use,
eciency, and the life of your Bottle Warmer,
please read this manual thoroughly and
follow all instructions prior to operating the
unit.
Specifications put forth in this manual
were in eect at the time of publication.
However, owing to Richmar’s policy of
continual improvement, changes to these
specifications may be made at any time
without obligation on the part of Richmar to
send notice of these changes.
WARRANTY
Richmar warrants that the Bottle Warmer
(herein referred to as the Product) is free
of defects in material and workmanship.
This warranty shall remain in eect for a
period of eighteen (18) months from the
date of original consumer purchase of the
Product and extends to any owner of the
Product during the warranty period. If this
product fails to function during the eighteen
month warranty period because of defect
in material or workmanship, Richmar or
the selling dealer will replace or repair this
Product without charge within a period of
thirty (30) days from the date on which the
defective Product is returned to Richmar or
the dealer. Richmar or the dealer will then
ship the replacement or the repaired Product
to the consumer’s facility.
All repairs must be performed by Richmar,
or a service center authorized by Richmar.
Any modifications or repairs performed by
unauthorized centers or groups will void
this warranty. To participate in warranty
coverage, this Product’s warranty registration
card (included with Product) must be filled
out and returned to Richmar, by the original
owner within ten (10) business days of
purchase.
This Warranty Does Not Cover
1. Replacement parts or labor furnished by
anyone other than Richmar, the dealer, or
approved Richmar service agent.
2. Defects or damage caused by labor
furnished by someone other than Richmar,
the dealer, or an approved Richmar service
agent.
3. Any malfunction or failure caused by
unreasonable use, including the failure
to provide reasonable and necessary
maintenance.
4. Use of non factory-authorized parts
voids this warranty.
5. Transfer of this warranty to any party
other than original purchaser.
Richmar shall not be liable for Incidental
or Consequential Damage to Property or
Business.
Some states do not allow the exclusion of
limitation or incidental or consequential
damages, so the above limitations or
exclusions may not apply to you.
To obtain service from Richmar, or the selling
dealer under this warranty, the owner must
do or abide by the following:
1. A written claim must be made within the
warranty period to Richmar or the selling
dealer. If the claim is made to Richmar, the
written claim should be sent to:
Technical Service
c/o Compass Health Brands
6753 Engle Road
Middleburg Heights, OH 44130
Phone: [phone]
Email: technicalsupport@
richmarweb.com
2. The Product must be returned to Richmar
or the selling dealer by the owner.
This warranty gives you specific legal rights
and you may also have other rights which
vary from state to state. Richmar does not
authorize any person or representative
to create for it or any other obligation or
liability connection with the sale of the
Product. Any representation or agreement
not contained in the warranty shall be voide
of no eect.
PRECAUTIONARY INSTRUCTIONS
• CAUTION: Bottle Warmer is for clinic/
professional use ONLY.
• CAUTION: Bottle Warmer fluids are never
applied directly to the patient’s skin
without testing the fluid temperature prior
to application.
• CAUTION: Read, understand, and
practice the precautionary and operating
instructions/ Know the limitations and
obsere the cautionary and operational
decals installed on the product.
• CAUTION: The thermostat is preset,
and should not be tampered with. The
operating temperature is approximately
105° F (40° C). Always allow sucient
time for the fluid temperature to stabilize.
• CAUTION: If electrical interference is
observed in the locale of the bottle
warmer, move the warmer to another area.

2
OPERATING INSTRUCTIONS
The Bottle Warmer is simple and easy
to use. The ON/OFF control is located in
the rear, near the bottom of the unit. The
thermostat controls the temperature of the
lotion. The unit is tested at the factory for
normal operational conditions, and cannot be
adjusted.
The Bottle Warmer operates with a preset
factory thermostat to provide a constant
and safe liquid temperature, and may be
left on at all times, except when performing
maintenance.
The Bottle Warmer is designed for
continuous operation and can be left on
indefinitely. If the Bottle Warmer is to be left
unattended for an extended period of time,
it is recommended that the unit be switched
o.
INSTALLATION
Remove all of the contents inside the Bottle
Warmer, and then place full gel or lotion
bottles into the sleeves of the unit.
To turn the unit on, plug the unit into an
appropriate outlet (115-120 or 220-240VAC
depending on model; at 50-60Hz) and toggle
the switch to the “I” position. To turn the unit
o, toggle the switch to the “O” position, and
unplug from the mains power supply. DO
NOT attempt to use direct current. Follow the
procedures indicated in the Precautionary
Instructions. DO NOT attempt to use the
unit if it is not properly grounded. (Allow 4-5
hours for the lotion or gel to reach maximum
temperature.)
1. Device Placement
Place the warmer at a convenient level, on
a table or counter top. Allow a minimum
of 250mm clearance above the unit so
that the bottles can be removed without
external interference and 150mm or
more in the back to be able to access
the power switch. The heater has an
electrical element and as with all electrical
components, should be kept clear of any
hazardous or explosive gases.
2. Changing Warmer Location
Before moving the Bottle Warmer, unplug
the unit and allow it to cool.
3. Electrical Interference
If electrical interference or EMC is
determined to exist between the Bottle
Warmer and sensitive therapeutic or
diagnostic equipment, move the Bottle
Warmer to a new location.
MAINTENANCE
To ensure the longevity of your Bottle
Warmer, clean the exterior regularly with
mild soap and water.
• Chlorine is detrimental to the coating. Do
not use bleach or any cleaner with a high
chlorine content.
• Ensure no abrasive material or caustic
substances make contact with the exterior
surface.
Troubleshooting
Wiring Diagram
STANDARD ACCESSORIES
Includes 3 empty 250mL bottles
REPLACEABLE PARTS
REF Description
203-016 Cord Set
203-360 AC Inlet
203-361 Fuse (2 per unit)
200-030 Power Switch
202-223 Thermostat
TECHNICAL SPECIFICATIONS
Power Supply 115/120 VAC
220/240 VAC
Rated Frequency 50-60 Hz
Power Consumption 1.0 amps
Temperature Range 100° F - 110° F
(38° C - 43° C)
Thermal Cut-out
Range
140° F - 142° F
(60° C - 61° C)
Accuracy +/- 10%
Time-to-temperature 5 hours
Safety Class Type B
Dimensions 40.64 cm (H) x
33.02 cm (L) x
22.89 cm (W)
Weight 17.84 lbs
(8.09 kg)
ORDERING DETAILS
REF Description
201-788 Gray 3 Bottle
Warmer (120V)
201-790 White 3 Bottle
Warmer (120V)
201-786 Blue 3 Bottle
Warmer (120V)
201-763 Gray 3 Bottle
Warmer (220V)
201-764 White 3 Bottle
Warmer (220V)
201-762 Blue 3 Bottle
Warmer (220V)

FUSES
1 A M P / 25 0V
Thermo-Switch
Opens at 110 ± 7°F
Closes at 96 ± 9°F
(Thermostat)
He ating
Eleme nt
Heating
Element
with Thermo-
Cut Off
He ating
Eleme nt
ON / OFF
Switch
C 14
Mains
Connector
Protective
Earth G round
3 Bottle Schematic
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Gel does not
get hot when
unit is plugged
in and turned
on.
1. Blown fuse in Bottle Warmer
2. Breaker for electric circuit
is o
3. Thermostat isn’t functioning
4. Heating element burned out
1. Change fuse
2. Turn breaker ON
3. Send for service - to replace
thermostat.
4. Send for service - to replace heatiing
element.

3007.15.10.B ©2019 Compass Health Brands Corp.
Compass Health Brands Corp.
Toll Free 1.888.549.4945
6753 Engle Road
Middleburg Heights, OH 44130
richmarweb.com
Manufactured for