Ricoh MT-C4 User manual

MT-C4 Training
1
Slide 1
MODEL MT-C4 TRAINING
Machine Codes: D062/D063/D065/D066
COPIER ENGINE
UPGRADE COURSE
BASED ON THE MT-C3
This course explains the differences between this model and the B246 series
copiers (MT-C3).
Some of the options are new.
This course assumes that you know the B246 series copiers. If you do not
know this series, you should take a full course on it before you do this
course.

MT-C4 Training
2
Slide 2
PRODUCT OUTLINE
Introduction
No additional notes

MT-C4 Training
3
Slide 3
How many Models?
Four models
MT-C4a (D062)
» 60 pages per minute (A4/LT LEF)
» Warm-up time: 30s
MT-C4b (D063)
» 70 pages per minute (A4/LT LEF)
» Warm-up time: 30s
MT-C4d (D065)
» 80 pages per minute (A4/LT LEF)
» Warm-up time: 60s
MT-C4e (D066)
» 90 pages per minute (A4/LT LEF)
» Warm-up time 300 s: Hot roller has a thicker surface layer
than the other three models
Each model has two versions: One without printer/scanner
kit, and one with printer/scanner kit
So, there are a total of eight different machines.
Other differences
D066 fusing unit has no pressure release mechanism
D066 development unit has a pressure release tube
D065 and D066 have stronger paper feed motors. D062/D063 use the same
motors as the MT-C3 series.

MT-C4 Training
4
Slide 4
Appearance
A4 LCT
Booklet
Finisher
We will see another example configuration on the next slide.

MT-C4 Training
5
Slide 5
Appearance
A4 LCT
Booklet
Finisher
Cover
Interposer Folder
No additional notes

MT-C4 Training
6
Slide 6
Appearance
A4 LCT
Booklet
Finisher
Mailbox
Folder
No additional notes

MT-C4 Training
7
Slide 7
Operation Panel
This type of color display panel is new for the MT series.
This shows the Europe/Asia version.

MT-C4 Training
8
Slide 8
PRODUCT OUTLINE
Sales Points
No additional notes

MT-C4 Training
9
Slide 9
Sales Points
High speed: 90 ppm (MT-C4e)
Advanced ADF Functions:
Color scan
Duplex scan with one pass
250 sheets capacity (Less than 69 g/m
2
, depending on the
paper type and condition)
150 sheets capacity(Less than 80 g/m
2
)
Folding Unit, with various types of folding
Same unit as in the B-C4 series
Color WVGA Operation Panel
Scan to USB/SD
Easy Pull-out Tray
Distribution to multiple destinations (with E-mail address)
No additional notes

MT-C4 Training
10
Slide 10
Operation Panel
Normal Display Simplified Display
Some features are not available with the simplified display.

MT-C4 Training
11
Slide 11
Easy Pull-out Tray Handles
No additional notes

MT-C4 Training
12
Slide 12
Optional USB 2.0/SD card slot
This optional unit allows use of the new Scan to USB and Scan to
SD features.
This allows users to scan documents and save them in electronic
format on an SD card and/or USB memory device.
If the USB device or SD card is then connected to a computer, the
scanned files can then be viewed, printed, or processed.
You cannot print or send files from this SD/USB slot with the
operation panel. You must connect the USB device/SD card to a
computer.
This USB slot cannot be used as a printer interface, except for
PictBridge.
Files saved on a removable memory device will not appear in the list of
stored files.
Files saved on a removable memory device cannot be printed or sent using
the machine's operation panel. To perform operations on files saved on a
removable memory device, you must use an application on a client
computer.
You cannot specify where the data is saved. Files are saved in the root
directory of the removable memory device.
Up to 2 GB of data can be saved. However, depending on the number of files
already stored on the removable memory device, new files might not be
saved, even if there appears to be sufficient free space.
If the removable memory device is partitioned, files are saved on the first
partition.

MT-C4 Training
13
Slide 13
Optional USB 2.0/SD card slot
Up to 2 GB of data can be saved.
However, depending on the number of files already stored
on the removable memory device, new files might not be
saved, even if there appears to be sufficient free space.
This machine supports FAT16 format USB memory devices
and SD cards. Other forms of removable memory device
are not compatible.
Saving might fail if the USB memory device has password
protection or other security features.
To save files on a removable memory device, you must
attach the optional USB 2.0/SD card slot to the machine.
File formats that can be used:
Single page TIFF/JPEG/PDF (including high compression
PDF)
Multipage TIFF/PDF (including high compression PDF)
No additional notes

MT-C4 Training
14
Slide 14
Product Positioning
No additional notes

MT-C4 Training
15
Slide 15
PRODUCT OUTLINE
Options
No additional notes

MT-C4 Training
16
Slide 16
Configuration – 1
Copier and Copy Tray Only
A4/LT Large
Capacity Tray
Can be fitted
with an
optional
B4/LG Tray
Copier
Contains built-in ARDF
Paper tray 1 can be fitted with
an optional A3/DLT tray
Paper trays 2 and 3 can be
fitted with an optional tab
sheet feeder
The copy tray must be installed if no other finishing options are installed.
Configurations with finishing options are shown on the next two slides.

MT-C4 Training
17
Slide 17
Configuration – 2
With 9-bin Mailbox
Copier
Folder
Mailbox
Finisher
Finisher
With the mail box, one of the following finishers can be installed:
2000-sheet Booklet Finisher with 50-sheet stapler
3000-sheet Finisher with 50-sheet stapler
Either a mail box or a cover interposer can be installed.
¾See the next slide for the configuration with the cover interposer.
The mail box cannot be installed with the 90cpm model (MT-C4e)
The mail box cannot be installed with the finisher with 100-sheet stapler.

MT-C4 Training
18
Slide 18
Configuration – 3
With Cover Interposer
Copier
Folder
Cover
Interposer
Finisher
Finisher
With the cover interposer, one of the following finishers can be installed:
2000-sheet Booklet Finisher with 50-sheet stapler
3000-sheet Finisher with 50-sheet stapler
3000-sheet Finisher with 100-sheet stapler (not possible with the mailbox)
Options must be installed in this order
¾For example, do not install the folder after the cover interposer.
Either a mail box or a cover interposer can be installed.
The mail box cannot be installed with the finisher with 100-sheet stapler.

MT-C4 Training
19
Slide 19
Engine Options – Paper Feed
A3/DLT Kit for Tray 1: New item
This is new because tray 1 in the copier main
body has been modified.
Tab Sheet Kit: Same as the B246 series
This can be installed at any time in paper tray 2
or 3 to let it feed tab sheets.
A4/LT Large Capacity Tray (LCT): Same as the
B246 series
LG/B4 Kit for the LCT: Same as the B246 series
No additional notes

MT-C4 Training
20
Slide 20
Engine Options - Finishing
Copy Tray: Same as the B246 series
Cover Interposer: Same as the B246 series
Cannot be installed if the mailbox is installed
Mailbox: Same as the B246 series
Cannot be installed with the cover interposer or
D460 finisher
Folder: Same as the D059 series (B-C4)
No additional notes