Ridemakerz RIDE User manual
RIDEMAKERZ.COM 1-866-58-RIDEZ (74339)
RIDE MANUAL
OWNERZ NAME PIT CHALLENGE TIME
MAKE MODEL
BUMPER-TO-BUMPER
RIDEMAKERZ.COM 1-866-58-RIDEZ (74339)
RIDEMAKERZ, LLC. warrants to the original consumer purchaser
that this product will be free of defects in material and workman-
ship for a period of thirty (30) days from the date of purchase.
RIDEMAKERZ will repair or replace the product, at our sole option,
in the event of such a defect within the warranty period.
In the event of a defect covered under this warranty, first call the
toll-free number listed below. Many problems can be solved in
this manner. If necessary, you may be instructed to return this
product, in which case you will be provided a pre-paid shipping
label or directed to the nearest RIDEMAKERZ SHOP. Repair or
replacement and return shipment will be free of charge. This
warranty does not cover damage resulting from unauthorized
modification, accident, misuse or abuse. A dated sales receipt
should accompany the returned product or product may be
excluded from coverage under this warranty.
RIDEMAKERZ liability for defects in material and workmanship
under this warranty shall be limited to repair and replacement,
at our sole option, and in no event shall we be responsible for
incidental, consequential, or contingent damages (except in
those states that do not allow this exclusion or limitation). This
warranty is exclusive, and is made in lieu of any express or
implied warranty. Valid only in U.S.A. and Canada. this warranty
gives you specific legal rights and you may have other rights,
which may very from state to state.
RIDEMAKERZ gladly accepts returns for exchange or refund within
30 days. Please save your receipt, return it to a RIDEMAKERZ SHOP
or ship your return to our RIDEMAKERZ Garage located at 111
Pacifica, Suite 110, Irvine, CA 92618. Product must be carefully
packed and shipped pre-paid and insured.
Thanks for becoming a RIDEMAKERZ® Customizer™!
Now that you have your own one-of-a-kind RIDE, you can
continue your experience online at RIDEMAKERZ.com. You
can download supercharged wall-paperz, view cool vidz &
picz, learn about car culture, and you can get on the inside
track by signing up for RIDEMAKERZ emails – all for FREE!
Plus, you can continue customizing your RIDE by cruising
through our one-of-a-kind RIDE Builder online; bringing
the RZ experience to your computer! With over 649 MILLION
WAYS to customize a RIDE your ENGINUITY is endless! Try
a new body or paint scheme, switch your chassis from
Street to Monster or Freewheel to R/C, add some new bling,
or trick-out your RIDE with different decalz.
We hope the information in this RIDE MANUAL is helpful
and gets you rollin’.
RIDE ON!
LIMITED WARRANTY LIMITED LIABILITY
2 WARRANTY
contents
contact
ONLINE ORDER QUESTION
SUGGESTIONS, QUESTIONS, & COMMENTS
OUR MAILING ADDRESS
RIDEMAKERZ
111 Pacifica, Suite 110
Irvine, CA 92618
OUR TOLL FREE NUMBER
1-866-58-RIDEZ (74339)
2
3
4
5
6
7
8
10
12
14
15
Warranty
Safety Warnings
Battery Information (Street)
Battery Information (Monster)
Radio Control
RIDESOUNDZ
RIDE Assembly (Street)
RIDE Assembly (Monster)
Accessories
Controller
Frequently Asked Questions
THANK YOU
RIDEMAKERZ.COM 1-866-58-RIDEZ (74339)
SAFETY WARNINGS
SAFETY WARNINGS 3
Note to Adults: To ensure that the child’s play is both safe and
fun, please review all operating instructions and safety rules
with your child.
ADULT SUPERVISION REQUIRED
CAUTION:
• Do not mix alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadmium) batteries.
• Rechargeable batteries are to be removed from the vehicle
before being charged.
• Rechargeable batteries are to be charged by an adult only.
• Non-rechargeable batteries are not to be recharged.
• Different types of batteries, or new and used batteries are not
to be mixed.
• Only batteries of the same or equivalent type as recommended
are to be used.
• Batteries are to be inserted with the correct polarity.
• The supply terminals are not to be short-circuited.
• Exhausted batteries are to be removed from the vehicle
(and transmitter).
• If vehicle will not be used for a long period of time, remove
batteries to prevent possible leakage.
• Dispose of batteries safely. Do not throw in re, as batteries
may explode or leak.
• Do not collide with humans or animals to avoid accidents.
PERFORMANCE AND SAFETY TIPS:
If your RIDE begins to slow down or sound/light features appear
weak, it’s time for new batteries or a recharge.
Running time for your RIDE will vary depending on your
driving style.
Radio interference can effect the performance of radio-control
vehicles. Interference can be caused by electrical wires, large
buildings, CB radios and other electrical devices.
For optimal performance, fully extend your transmitter antenna
and point it upward (not down toward the vehicle) and drive in
clear, open spaces (such as an empty parking lot). NEVER drive
your RIDE on the street or in a parking lot that is in use.
DO NOT pick up or touch the vehicle when it is in motion! Keep
fingers, hair and loose clothing away from the wheels when the
vehicle is in operation.
Don’t drive your RIDE in sand or through water or snow.
Avoid head-on collisions with walls or hard surfaces. Don’t
collide with humans or animals to prevent injury.
Don’t store your vehicle near heat or in direct sunlight.
Give your RIDE a 5 minute “pit stop” for every 15 minutes of
operation. Always turn switches OFF when not in use.
RADIO CONTROL
FCC Warning
CAUTION: The manufacturer is not responsible for radio
interference caused by unauthorized frequency modification
to this equipment. Such modifications could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RIDEMAKERZ.COM 1-866-58-RIDEZ (74339)
4 BATTERY
BATTERY INSTALLATION
23a 3b
OR
1
CHASSIZ
1. Remove battery cover on the bottom
of chassiz using a Phillips screwdriver
or RZ Hex Key.
2. Turn oval latch clockwise to unlock the
battery case. Lift case straight up out of
the compartment.
3. Batteries are on both sides of
the box. Remove old batteries and
discard properly. Install 4 new alkaline
batteries. Follow directions inside the
battery compartment.
Install the rechargeable Ni-Cd battery
pack (sold separately) and attach the
wire connector plug from the vehicle
to the battery pack. Twist the locking
tab to the locked position to hold the
battery firmly in place.
OR
TRANSMITTER BATTERY INSTALLATION
street
Remove the the battery
compartment cover, using a
Phillips screwdriver or RZ Hex
Key, and install one 9V alkaline
battery. Follow directions inside
the battery compartment.
RIDEMAKERZ.COM 1-866-58-RIDEZ (74339)
BATTERY 5
monster
BATTERY INSTALLATION
2 3a 3b
1
OR
CHASSIZ
1. Remove battery cover on the bottom
of chassiz using a Phillips screwdriver
or RZ Tool.
2. Turn oval latch clockwise to unlock the
battery case. Lift case straight up out of
the compartment.
3. Batteries are housed on both sides of
the case. Slide off the protective door
on the battery box. Remove old batteries
and install 6 new alkaline batteries.
Lock oval latch.
Install the rechargeable Ni-Cd battery
pack (sold separately) and attach the
wire connector plug from the vehicle
to the battery pack. Twist the locking
tab to the locked position to hold the
battery pack firmly in place.
OR
TRANSMITTER BATTERY INSTALLATION
Remove the the battery
compartment cover, using a
Phillips screwdriver or RZ Hex
Key, and install one 9V alkaline
battery. Follow directions inside
the battery compartment.
Table of contents
